DIN 6797 Toothed Lock Washers (Types A / J / V)
Toothed lock washers per DIN 6797 in all three forms — Type A external teeth, Type J internal teeth, Type V countersunk. The teeth bite into nut and joint faces under the preload, resisting rotation in small-screw assemblies; the collected tables run Type A M1.6–M30, Type J M2–M30 and Type V M2–M16.
Last updated: 2026-11
Specifications
DIN 6797 lock washers carry radial teeth that dig into both the bearing surface and the fastener face as the joint is tightened, raising resistance to rotational back-off in small-screw assemblies — electrical terminations, control gear, automotive components. Three forms cover the mounting situations: Type A with external teeth gives the widest bearing and the strongest bite on the joint face; Type J with internal teeth hides the tooth ring inside the fastener’s footprint for a cleaner bearing face; Type V is countersunk for use with countersunk head screws. The collected tables list tooth counts rising with size — 6 teeth at the smallest sizes to 14 at the largest on the A and J types — with hole, outer diameter, thickness t and per-size weights.
| Standard | DIN 6797 — toothed lock washers: Type A (external teeth), Type J (internal teeth), Type V (countersunk) |
|---|---|
| Locking mechanism | Radial teeth bite into fastener and joint faces under preload, raising rotation resistance |
| Type A size range | M1.6 through M30 — size 1.7–31 mm, thickness t 0.3–1.6 mm, teeth 6–14 |
| Type J size range | M2 through M30 — size 2.2–31 mm, thickness t 0.3–1.6 mm, teeth 6–14 |
| Type V size range | M2 through M16 — size 2.2–17 mm, thickness h 0.2–0.6 mm, teeth 6–12 (dc approximate per the collected table) |
| Typical applications | Electrical terminations, control gear, small-screw assemblies where a serrated bearing face is acceptable |
| For nominal thread | Size (= d min) (mm) | d max (mm) | dc max (mm) | dc min (mm) | t (mm) | Number of teeth | Weight (kg / 1000 pcs) |
|---|---|---|---|---|---|---|---|
| M1.6 | 1.7 | 1.84 | 3.6 | 3.3 | 0.3 | 6 | 0.01 |
| M2 | 2.2 | 2.34 | 4.5 | 4.2 | 0.3 | 6 | 0.025 |
| M2.5 | 2.7 | 2.84 | 5.5 | 5.2 | 0.4 | 6 | 0.04 |
| M3 | 3.2 | 3.38 | 6 | 5.7 | 0.4 | 6 | 0.045 |
| M3.5 | 3.7 | 3.88 | 7 | 6.64 | 0.5 | 6 | 0.075 |
| M4 | 4.3 | 4.48 | 8 | 7.64 | 0.5 | 8 | 0.095 |
| M5 | 5.3 | 5.48 | 10 | 9.64 | 0.6 | 8 | 0.18 |
| M6 | 6.4 | 6.62 | 11 | 10.57 | 0.7 | 8 | 0.22 |
| M7 | 7.4 | 7.62 | 12.5 | 12.07 | 0.8 | 8 | 0.3 |
| M8 | 8.4 | 8.62 | 15 | 14.57 | 0.8 | 8 | 0.45 |
| M10 | 10.5 | 10.77 | 18 | 17.57 | 0.9 | 9 | 0.8 |
| M12 | 13 | 13.27 | 20.5 | 19.98 | 1 | 10 | 1 |
| M14 | 15 | 15.27 | 24 | 23.48 | 1 | 10 | 1.6 |
| M16 | 17 | 17.27 | 26 | 25.48 | 1.2 | 12 | 2 |
| M18 | 19 | 19.33 | 30 | 29.48 | 1.4 | 12 | 3.5 |
| M20 | 21 | 21.33 | 33 | 32.38 | 1.4 | 12 | 3.8 |
| M22 | 23 | 23.33 | 36 | 35.38 | 1.5 | 14 | 5 |
| M24 | 25 | 25.33 | 38 | 37.38 | 1.5 | 14 | 6 |
| M27 | 28 | 28.33 | 44 | 43.38 | 1.6 | 14 | 8 |
| M30 | 31 | 31.39 | 48 | 47.38 | 1.6 | 14 | 9 |
- Row 1 (M1.6): On the collected page, an "M20 | M22 | M24" column-header group prints values only for the M20/M22 columns. The M24-M30 values in this table are completed from the same page's tail groups, which print their values ahead of the "For Nominal Thread Diameter" header rows; row attribution verified by hole-d arithmetic (d min = nominal thread).
- The source prints the footnote "*acc. to DIN 6797: 1971" beneath the table; reproduced as printed.
| For nominal thread | Size (= d min) (mm) | d max (mm) | dc max (mm) | dc min (mm) | t (mm) | Number of teeth | Weight (kg / 1000 pcs) |
|---|---|---|---|---|---|---|---|
| M2 | 2.2 | 2.34 | 4.5 | 4.2 | 0.3 | 6 | 0.04 |
| M2.5 | 2.7 | 2.84 | 5.5 | 5.2 | 0.4 | 6 | 0.045 |
| M3 | 3.2 | 3.38 | 6 | 5.7 | 0.4 | 6 | 0.045 |
| M3.5 | 3.7 | 3.88 | 7 | 6.64 | 0.5 | 6 | 0.085 |
| M4 | 4.3 | 4.48 | 8 | 7.64 | 0.5 | 8 | 0.1 |
| M5 | 5.3 | 5.48 | 10 | 9.64 | 0.6 | 8 | 0.2 |
| M6 | 6.4 | 6.62 | 11 | 10.57 | 0.7 | 8 | 0.25 |
| M7 | 7.4 | 7.62 | 12.5 | 12.07 | 0.8 | 8 | 0.35 |
| M8 | 8.4 | 8.62 | 15 | 14.57 | 0.8 | 8 | 0.55 |
| M10 | 10.5 | 10.77 | 18 | 17.57 | 0.9 | 9 | 0.9 |
| M12 | 13 | 13.27 | 20.5 | 19.98 | 1 | 10 | 1.2 |
| M14 | 15 | 15.27 | 24 | 23.48 | 1 | 10 | 1.9 |
| M16 | 17 | 17.27 | 26 | 25.48 | 1.2 | 12 | 2.4 |
| M18 | 19 | 19.33 | 30 | 29.48 | 1.4 | 12 | 3.7 |
| M20 | 21 | 21.33 | 33 | 32.38 | 1.4 | 12 | 4.1 |
| M22 | 23 | 23.33 | 36 | 35.38 | 1.5 | 14 | 6 |
| M24 | 25 | 25.33 | 38 | 37.38 | 1.5 | 14 | 6.5 |
| M27 | 28 | 28.33 | 44 | 43.38 | 1.6 | 14 | 8.5 |
| M30 | 31 | 31.39 | 48 | 47.38 | 1.6 | 14 | 9.5 |
- Row 1 (M2): The collected table prints a "M24 | M27 | M30" header group with no data rows at all; sizes stop at M22. Row attribution verified by hole-d arithmetic (d min = nominal thread): the fuller table prints its last groups with values ahead of their headers.
- The source prints the footnote "*acc. to DIN 6797: 1971" beneath the table; reproduced as printed.
| For nominal thread | Size (= d min) (mm) | d max (mm) | dc approx. (mm) | h (mm) | Number of teeth (min) | Weight (kg / 1000 pcs) |
|---|---|---|---|---|---|---|
| M2 | 2.2 | 2.34 | 4.2 | 0.2 | 6 | 0.02 |
| M2.5 | 2.7 | 2.84 | 5.1 | 0.2 | 6 | 0.025 |
| M3 | 3.2 | 3.38 | 6 | 0.2 | 6 | 0.025 |
| M3.5 | 3.7 | 3.88 | 7 | 0.25 | 6 | 0.04 |
| M4 | 4.3 | 4.48 | 8 | 0.25 | 8 | 0.05 |
| M5 | 5.3 | 5.48 | 9.8 | 0.3 | 8 | 0.12 |
| M6 | 6.4 | 6.62 | 11.8 | 0.4 | 10 | 0.2 |
| M8 | 8.4 | 8.62 | 15.3 | 0.4 | 10 | 0.4 |
| M10 | 10.5 | 10.77 | 19 | 0.5 | 10 | 0.7 |
| M12 | 13 | 13.27 | 23 | 0.5 | 10 | 1.2 |
| M14 | 15 | 15.27 | 26.2 | 0.6 | 12 | 1.3 |
| M16 | 17 | 17.27 | 30.2 | 0.6 | 12 | 1.3 |
- Row 1 (M2): Data stops at M16 in the collected table — the page's last printed weight row corresponds to the M12/M14/M16 block; larger sizes are not tabulated by the source.
Materials
- Material and finish specified per RFQ — the collected specification table covers geometry only
Ordering & documentation
Documents
Shipments of DIN 6797 Toothed Lock Washers (Types A / J / V) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6797 Toothed Lock Washers (Types A / J / V) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6797 Toothed Lock Washers (Types A / J / V)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 6797 Toothed Lock Washers (Types A / J / V): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 6797 toothed lock washers (types a / j / v) is 10,000 pieces (applies to the standard sizes and finishes for din 6797 toothed lock washers (types a / j / v); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6797 toothed lock washers (types a / j / v) run 3–7 days. Quantities or variants of din 6797 toothed lock washers (types a / j / v) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6797 Toothed Lock Washers (Types A / J / V) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6797 toothed lock washers (types a / j / v) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
External (Type A) or internal (Type J) teeth — how do I choose?
Choose by what the bearing face tolerates and what must stay clean. Type A puts the tooth ring outside the screw footprint: the strongest bite into the joint face, but it leaves serration marks on a wider ring — fine on unrefined surfaces, wrong on finished or sealing faces. Type J keeps the teeth inside the fastener’s footprint, so the damaged area is hidden under the head and the outside face stays clear — the usual pick on control gear and visible panels. Type V belongs to countersunk heads, where neither A nor J can bear. All three lock by the same mechanism: teeth embedded under preload resist rotation.
Can toothed lock washers be reused?
Treat them as single-use. The lock depends on teeth that have been pressed into their set depth against the mating faces; after removal those teeth have flattened at the tips and the faces they scored are already marked. A reused washer bites less and its embedded depth no longer matches the new seat. Where the assembly is serviced regularly, note the toothed washer as a renew-at-each-service item on the drawing — and where the joint must not mar the surface at all, choose a positive lock instead.
What is the MOQ and lead time for this washer type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity and size mix at quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6797 Toothed Lock Washers (Types A / J / V) inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your DIN 6797 Toothed Lock Washers (Types A / J / V)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support