DIN 6798 Type A Serrated Lock Washers (External Teeth)

DIN 6798 Type A serrated lock washers with external teeth, washer sizes 1.7 to 31 — the toothed bearing washer that bites into both faces to resist rotation — with the full collected 20-size table: bore and outside diameters, thickness, tooth counts and the source's reference mass per 1000 units.

Last updated: 2026-11

Request a Quote

DIN 6798 Type A Serrated Lock Washers (External Teeth) in an industrial setting
Illustrative image redrawn from real DIN 6798 Type A Serrated Lock Washers (External Teeth) product references — not a photograph of stocked items.

Specifications

DIN 6798 Type A is the externally serrated lock washer: a ring of punched, raised teeth around the outside edge that dig into the fastener's bearing face and the workpiece surface when tightened. The bite raises the rotational resistance of the joint at low cost, which is why serrated washers appear on brackets, motors and sheet-metal assemblies where a plain washer would let the screw walk loose under vibration. The collected table covers washer sizes 1.7 to 31 — keyed to the matching thread in the final For Nominal Thread Diameter column (M1.6 through M30) — with the bore d (nominal/min and max), outside diameter d c, minimum thickness t, the minimum Number of Teeth (9 to 22 across the series), and the source's reference mass per 1000 units. The internal-toothed counterpart is DIN 6798 Type J on the same specification; the conical-toothed DIN 6798 Type V bites on an angled face. For a toothless vibration solution see the DIN 6796 conical spring washer on this site. Materials and finishes are not printed by the collected specification and stay per RFQ.

Standard DIN 6798 Type A — serrated lock washers, external teeth
Series Washer sizes 1.7 – 31, matching threads M1.6 – M30 (20 sizes tabulated)
Tabulated geometry Per size: bore d (min=nominal size / max), outside diameter d c (max=nominal size / min), thickness t min, minimum Number of Teeth, reference mass per 1000 units ≈ kg, matching For Nominal Thread Diameter entry
Function External serrations bite into bearing face and workpiece, raising rotational resistance under vibration
Family note Internal-toothed counterpart DIN 6798 Type J; conical-toothed Type V; toothless conical spring alternative DIN 6796
Materials / strength Not tabulated by the collected specification — per RFQ (material and finish per drawing callout)
DIN 6798 Type A serrated lock washers (external teeth) - per-size dimensions (size 1.7 - 31)All dimensions in millimeters. The first column is the washer nominal size (the source's own Size row, 1.7 - 31); attribute labels follow the source: d = bore diameter min=nominal size / max; d c = outside diameter max=nominal size / min; t = washer thickness minimum; Number of Teeth = minimum; the final two columns are the source's approximate mass per 1000 units in kilograms and the matching For Nominal Thread Diameter entry — both reproduced as printed. Materials and finishes are not tabulated by the collected specification.
Nominal threadd — min=nominal sized — maxd c — max=nominal sized c — mintNumber of Teeth — minper 1000 units≈kgFor Nominal Thread Diameter
1.71.71.843.63.30.390.02M1.6
2.22.22.344.54.20.390.03M2
2.72.72.845.55.20.490.045M2.5
3.23.23.3865.70.490.06M3
3.73.73.8876.640.5100.11M3.5
4.34.34.4887.640.5110.14M4
5.35.35.48109.640.6110.28M5
6.46.46.621110.570.7120.36M6
7.47.47.6212.512.070.8140.5M7
8.48.48.621514.570.8140.8M8
10.510.510.771817.570.9161.25M10
131313.2720.519.981161.6M12
151515.272423.481182.3M14
171717.272625.481.2182.9M16
191919.333029.481.4185M18
212121.333332.381.4206M20
232323.333635.381.5207.5M22
252525.333837.381.5208M24
282828.334443.381.62212M27
313131.394847.381.62214M30

Materials

  • Material and finish specified per RFQ — the collected specification table covers geometry and reference mass only

Ordering & documentation

Documents

Shipments of DIN 6798 Type A Serrated Lock Washers (External Teeth) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6798 Type A Serrated Lock Washers (External Teeth) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 6798 Type A Serrated Lock Washers (External Teeth)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 6798 Type A Serrated Lock Washers (External Teeth): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 6798 type a serrated lock washers (external teeth) is 10,000 pieces (applies to the standard sizes and finishes for din 6798 type a serrated lock washers (external teeth); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6798 type a serrated lock washers (external teeth) run 3–7 days. Quantities or variants of din 6798 type a serrated lock washers (external teeth) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 6798 Type A Serrated Lock Washers (External Teeth) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6798 type a serrated lock washers (external teeth) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

External teeth (Type A) or internal teeth (Type J) — how do I choose?

By where the teeth should bite and what they may damage. Type A's outer teeth grip a wide ring of the workpiece surface — the strongest anti-rotation bite, but they leave cosmetic marks on visible faces and are meant for hard enough material to take the tooth impression. Type J's inner teeth bite into the fastener's bearing face under the head, keeping the workpiece surface clean and suiting smaller contact areas. Neither substitutes for proper preload: serrations raise the friction that holds a joint against vibration, but a joint sized for a safety-critical clamp should use a genuine spring element such as a DIN 6796 conical washer or a wedge-locking pair.

What is the MOQ and lead time for this washer type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 6798 Type A Serrated Lock Washers (External Teeth) inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your DIN 6798 Type A Serrated Lock Washers (External Teeth)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.