DIN 6798 V Serrated Lock Washers (Type V)

DIN 6798 V serrated lock washers, type V countersunk form — washer sizes 2.2 to 17 for threads M2 to M16, the bevelled toothed washer that locks a countersunk head, with the collected hole/outside-diameter/tooth-count ladder and kg/1000 figures.

Last updated: 2026-11

Request a Quote

DIN 6798 V Serrated Lock Washers (Type V) in an industrial setting
Illustrative image redrawn from real DIN 6798 V Serrated Lock Washers (Type V) product references — not a photograph of stocked items.

Specifications

DIN 6798 V is the countersunk-form serrated lock washer: bevelled to seat inside a countersunk hole, with rim teeth that bite the head cone and the housing face so a countersunk screw holds torque under vibration — the form a flat serrated washer cannot serve, because the head is a cone, not a flat. The collected ladder runs washer sizes 2.2 → 17 with each table's nominal thread mapping printed as a footer row (size 2.2 takes M2, size 6.4 takes M6, size 13 takes M12, through M16 at size 17). Compared with the type J form, the V table prints single values for outside diameter d c (4.2 → 30.2 mm) and thickness h (0.2 → 0.6 mm) per size — no min/max split — and runs higher minimum tooth counts at comparable sizes (10 teeth at size 2.2, 30 teeth at size 17); all rows are carried verbatim in the ladder. Note the collected range stops at thread M16 — larger countersunk assemblies have no tabulated V-form size in this source. Tooth hardness and finish are not tabulated by the collected specification — per RFQ.

Standard DIN 6798 type V — serrated lock washers, countersunk form (per the collected source header)
Size range Washer sizes 2.2 – 17 (nominal hole diameter), threads M2 – M16 per the source footer mapping
Hole diameter d: min = nominal size, max 2.34 – 17.27 mm across the ladder
Outside diameter d c: 4.2 – 30.2 mm, single value per size (no min/max split in the source)
Teeth Minimum tooth count 10 → 30 per size; thickness h 0.2 – 0.6 mm
Weight kg/1000 pcs column carried verbatim from the source (0.025 → 2.3)
Hardness / finish Not tabulated by the collected specification — per RFQ
DIN 6798 V serrated lock washers (countersunk form) - sizes 2.2 - 3.2 (threads M2 - M3)All dimensions in millimetres; weight is the source's own approximate kg per 1000 units column. Attribute labels follow the source: d = hole diameter; d c = outside diameter (single approximate value, no min/max split); h = thickness (single value); Number of Teeth = minimum tooth count. The source prints each size's nominal thread diameter as a footer row at the bottom of the table — carried in place. Finishes and spring-steel hardness are not tabulated by the collected specification.
Attribute2.22.73.2
d — min=nominal size2.22.73.2
d — max2.342.843.38
d c4.25.16
h0.20.20.2
Number of Teeth — min101012
per 1000 units≈kg0.0250.030.04
For Nominal Thread DiameterM2M2.5M3
  • Thread-diameter footer row carried in place (see type J first table).
  • Row 3 (d c): The d c and h rows carry no min/max qualifier in the type V table — single values per size, unlike the type J table's d c min/max split. Transcribed as rendered.
DIN 6798 V serrated lock washers (countersunk form) - sizes 3.7 - 5.3 (threads M3.5 - M5)All dimensions in millimetres; labels and reading order as the first table.
Attribute3.74.35.3
d — min=nominal size3.74.35.3
d — max3.884.485.48
d c789.8
h0.250.250.3
Number of Teeth — min121414
per 1000 units≈kg0.0750.10.2
For Nominal Thread DiameterM3.5M4M5
DIN 6798 V serrated lock washers (countersunk form) - sizes 6.4 - 10.5 (threads M6 - M10)All dimensions in millimetres; labels and reading order as the first table.
Attribute6.48.410.5
d — min=nominal size6.48.410.5
d — max6.628.6210.77
d c11.815.319
h0.40.40.5
Number of Teeth — min161820
per 1000 units≈kg0.30.51
For Nominal Thread DiameterM6M8M10
DIN 6798 V serrated lock washers (countersunk form) - sizes 13 - 17 (threads M12 - M16)All dimensions in millimetres; labels and reading order as the first table.
Attribute131517
d — min=nominal size131517
d — max13.2715.2717.27
d c2326.230.2
h0.50.60.6
Number of Teeth — min262830
per 1000 units≈kg1.51.92.3
For Nominal Thread DiameterM12M14M16

Materials

  • Material specified per RFQ — state the countersunk assembly's substrate and environment at quotation; the collected table does not tabulate temper, hardness or finish

Ordering & documentation

Documents

Shipments of DIN 6798 V Serrated Lock Washers (Type V) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6798 V Serrated Lock Washers (Type V) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 6798 V Serrated Lock Washers (Type V)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 6798 V Serrated Lock Washers (Type V): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 6798 v serrated lock washers (type v) is 10,000 pieces (applies to the standard sizes and finishes for din 6798 v serrated lock washers (type v); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6798 v serrated lock washers (type v) run 3–7 days. Quantities or variants of din 6798 v serrated lock washers (type v) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 6798 V Serrated Lock Washers (Type V) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6798 v serrated lock washers (type v) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why does the type V table print single outside-diameter values instead of min/max?

That is how the source tabulates the countersunk form: the V washer's outside diameter and thickness are printed as single values per size (d c 4.2 at size 2.2 rising to 30.2 at size 17, h 0.2 rising to 0.6), while only the hole diameter carries a max tolerance above nominal. The likely reason is functional rather than sloppy: in a countersunk seat the cone angle, not the outer rim, controls fit — the washer is deliberately sized under the head's cone so the rim never interferes — so the source prints the cone-relevant values once. The same single-value presentation carries into the tooth counts (10 minimum at size 2.2 up to 30 at size 17). If your drawing tolerances the outer rim explicitly, quote the drawn limits on the RFQ — the collected table does not tabulate them.

What is the MOQ and lead time for DIN 6798 V Serrated Lock Washers (Type V)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 6798 V Serrated Lock Washers (Type V) state?

State the full designation (DIN 6798 type V), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 6798 V Serrated Lock Washers (Type V) inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your DIN 6798 V Serrated Lock Washers (Type V)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.