DIN 1441 Flat Washers for Clevis Pins (Coarse)

DIN 1441 coarse flat washers for clevis pins, bores d1 5,5–102 mm — the plain washer whose bore runs one size over the reference thread to suit a clevis-pin shaft, with the collected bore/outside-diameter/thickness ladder.

Last updated: 2026-11

Request a Quote

DIN 1441 Flat Washers for Clevis Pins (Coarse) in an industrial setting
Illustrative image redrawn from real DIN 1441 Flat Washers for Clevis Pins (Coarse) product references — not a photograph of stocked items.

Specifications

DIN 1441 is the coarse-series companion to DIN 1440: a plain flat washer whose bore is sized for the shaft of a clevis pin — which runs larger than the reference thread the standard prints, hence the one-size offset (the 7 mm bore pairs with M6, the 21 mm bore with M20, through the 102 mm bore at M100). The collected table runs 36 sizes with outside diameters d2 10 → 125 mm and thicknesses s 0,8 → 14 mm, plus the source's weight-per-1000 column. In a clevis joint the washer does three quiet jobs: it carries the pin head seat, it takes the wear when the fork works, and it sets the side play of the fork against the pin head — so bore fit (sliding on the pin, not clamped), outside diameter (cover the seat, clear the fork walls) and thickness (as printed per bore) are the three reads off the table. Where the assembly uses a pin threaded at its own shaft size with a medium-type washer, DIN 1440 is the counterpart in this catalog. Material and finish are not tabulated by the collected specification — per RFQ.

Standard DIN 1441 — flat washers for clevis pins, coarse (bore one size over the reference thread)
Size range Bore d1 5,5 – 102 mm, thirty-six sizes in the collected ladder
Outside diameter d2: 10 → 125 mm across the ladder
Thickness s: 0,8 → 14 mm as printed by the source
Weight kg/1000 pcs column carried verbatim from the source (0,34 → 451)
Hole-to-pin mapping (companion print) One bore can serve two pins: the companion collected tech table maps each hole to its pin(s) per block, including the compound cells (the 34 mm hole serves pins 32 and 33, the 41 hole serves pin 40) — this ladder prints one row per (bore, reference-thread) pair, so a shared bore appears as two rows (34/M32 and 34/M33, 37/M35 and 37/M36)
Materials / finishes Not tabulated by the collected specification — per RFQ (state pin diameter and joined material at quotation)
DIN 1441 flat washers for clevis pins, coarse — bore, outside diameter and thickness, d1 5,5–102 mmAll dimensions in millimetres, comma decimal separators preserved from the source. d1 = bore (the clevis-pin diameter the washer fits — the ladder runs one size above the reference thread because the pin, not the thread, is the fitting surface); d2 = outside diameter; s = thickness. The weight column is the source's kg/1000 pcs figure. Material is not tabulated by the source — per RFQ.
Bore (d1)For ThreadOutside Dia. (d2)Thickness (s)Weight kg/1000 pcs
5,5M5100,80,34
7M6121,60,94
8M7141,61,3
9M81622,16
11M10202,54,3
13M122538,43
14M132537,94
15M1428310,3
17M162839,16
19M1830413,3
21M2032414,4
23M2234415,5
24M2336417,8
25M2438420
26M2540422,8
27M2640526,9
28M2740525
29M2842528,5
31M3045532,8
34M3250543,5
34M3350543,5
37M3552649,4
37M3652649,4
41M4058659,2
46M4562770,6
51M5068894,7
56M55759138
62M60809142
68M65909193
72M709510237
78M7510010241
82M8011012398
86M8511012348
92M9011512352
98M9512012355
102M10012514451

Materials

  • Material specified per RFQ — state whether the clevis works under load (wear moves the choice toward harder or case-hardened stock, confirmed at quotation)

Ordering & documentation

Documents

Shipments of DIN 1441 Flat Washers for Clevis Pins (Coarse) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 1441 Flat Washers for Clevis Pins (Coarse) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 1441 Flat Washers for Clevis Pins (Coarse)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 1441 Flat Washers for Clevis Pins (Coarse): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 1441 flat washers for clevis pins (coarse) is 10,000 pieces (applies to the standard sizes and finishes for din 1441 flat washers for clevis pins (coarse); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 1441 flat washers for clevis pins (coarse) run 3–7 days. Quantities or variants of din 1441 flat washers for clevis pins (coarse) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 1441 Flat Washers for Clevis Pins (Coarse) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 1441 flat washers for clevis pins (coarse) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why does the DIN 1441 bore run bigger than the thread it is listed under?

Because the washer fits the pin, not a bolt shank: a clevis pin's shaft is a smooth diameter that runs over the nominal thread size, so the standard offsets the bore one step up from the reference thread — the 13 mm bore pairs with M12, the 41 mm bore with M40. Order by the bore your pin actually measures: quote the measured pin diameter and the washer follows from the table (d2 and s per bore, verbatim in the ladder above). Two practical cautions: where the source lists the same bore twice against adjacent threads (34 mm at M32/M33, 37 mm at M35/M36), it is one washer serving two thread lines — order once; and neither the collected table nor the standard print fixes material or finish, so state the joint environment on the RFQ and the stock is confirmed at quotation.

What is the MOQ and lead time for DIN 1441 Flat Washers for Clevis Pins (Coarse)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 1441 Flat Washers for Clevis Pins (Coarse) state?

State the full designation (DIN 1441), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 1441 Flat Washers for Clevis Pins (Coarse) inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your DIN 1441 Flat Washers for Clevis Pins (Coarse)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.