Electrical-Insulating Flat Washers

Flat insulating washers in Garolite G-10/FR4, mica, ceramic, fiberglass and hard fiber — thicknesses from 0.001" to 0.025", lengths from 1/16" to 11/16", with grades rated from cryogenic service (−250 °F or below) up to 1,000 °F and beyond.

Last updated: 2026-11

Request a Quote

Electrical-Insulating Flat Washers in an industrial setting
Illustrative image redrawn from real Electrical-Insulating Flat Washers product references — not a photograph of stocked items.

Specifications

Where the isolation task is under-head only, the flat insulating washer is the economical part: a simple disc placed between a screw head or nut face and the surface it must not electrically contact. Material selection is the whole decision. Garolite G-10/FR4 — the glass-epoxy laminate of PCB fame — brings high strength and dimensional stability for structural-looking joints that still need isolation. Mica and ceramic take the high-temperature end, with grades rated to 1,000 °F and beyond; fiberglass covers general electrical service; hard fiber is the traditional low-cost insulator. Thicknesses start at 0.001" — shim-grade discs for tight clearances — and run to 0.025". Cryogenic grades are rated to −250 °F and below. RoHS-compliant options are part of the same catalog line, which matters for consumer and automotive electrical builds.

Function Insulating disc placed under a screw head or nut face to break electrical contact with the clamped surface
Materials Garolite G-10/FR4, mica, ceramic, fiberglass, hard fiber
Thickness band 0.001"–0.025" across material grades, from shim-grade discs up to structural laminate
Length (OD) band 1/16" through 11/16" across the range
Temperature coverage Grades from −250 °F or below (cryogenic) up to 1,000 °F or greater; most categories cluster below 500 °F
Performance options Electrical insulating, high temperature, flame retardant, moisture resistant grades; RoHS-compliant options
Typical applications PCB and terminal standoff isolation, under-head insulation on painted or anodized surfaces, high-temperature heater and sensor assemblies

Materials

  • Garolite G-10/FR4
  • Mica
  • Ceramic
  • Fiberglass
  • Hard fiber

Ordering & documentation

Documents

Shipments of Electrical-Insulating Flat Washers are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Electrical-Insulating Flat Washers orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Electrical-Insulating Flat Washers), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for Electrical-Insulating Flat Washers: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for electrical-insulating flat washers is 10,000 pieces (applies to the standard sizes and finishes for electrical-insulating flat washers; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for electrical-insulating flat washers run 3–7 days. Quantities or variants of electrical-insulating flat washers outside the standard range are confirmed at quotation.

Storage & shipping

Electrical-Insulating Flat Washers are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store electrical-insulating flat washers dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How do I choose between Garolite, mica and ceramic for an insulating washer?

By the joint's mechanical and thermal demands, in that order. Garolite G-10/FR4 carries real structural load and holds dimensions, so it is the choice when the washer also works as a bearing surface. Mica handles high temperature with the thinner sections — it is the classic 0.001"-class shim insulator for heaters and sensors. Ceramic goes where mica ends: the hottest grades, at the cost of brittleness, so it wants a flat, undisturbed seat and no prying. Fiberglass and hard fiber fill the ordinary middle — general electrical service at commodity cost. Match the temperature grade first, then the load, then pick the thinnest stock that keeps the margin.

What is the MOQ and lead time for this washer type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this washer type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Electrical-Insulating Flat Washers inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your Electrical-Insulating Flat Washers
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.