DIN 6798 J Serrated Lock Washers (Type J)
DIN 6798 J serrated lock washers, type J internal-tooth form — washer sizes 1.7 to 31 for threads M1.6 to M30, the toothed anti-rotation washer that bites flat faces, with the collected hole/outside-diameter/tooth-count ladder and kg/1000 figures.
Last updated: 2026-11
Specifications
DIN 6798 J is the flat-form serrated lock washer: a hardened washer whose rim carries radial teeth (the tooth-count row is tabulated per size, 7 teeth at the small end rising to 18 at size 31) that bite into both faces when the joint is tightened, resisting rotation in place of — or alongside — a spring washer, without the helical split washer's softness on wide bearing faces. The collected ladder runs washer sizes 1.7 → 31 (the size is the nominal hole diameter), each table printing its nominal thread mapping as a footer row: size 3.2 takes M3, size 8.4 takes M8, size 25 takes M24. Order by thread through the mapping, then read the bore tolerance (min/max rows) and outside diameter (d c) for the clearance and bearing checks; the kg/1000 column runs 0.02 kg at size 1.7 to 14 kg at size 31. The type V form is the companion for countersunk-head assemblies. Tooth hardness, spring temper and finish are not tabulated by the collected specification — per RFQ (state the substrate the teeth must bite — steel, aluminium, painted — because tooth penetration is what carries the locking).
| Standard | DIN 6798 type J — serrated lock washers (internal teeth per the collected source header) |
|---|---|
| Size range | Washer sizes 1.7 – 31 (nominal hole diameter), threads M1.6 – M30 per the source footer mapping |
| Hole diameter | d: min = nominal size, max 1.84 – 31.39 mm across the ladder |
| Outside diameter | d c: 3.3 – 48 mm min, 3.6 – 48 mm max per size |
| Teeth | Minimum tooth count 7 → 18 per size; thickness t 0.3 → 1.6 mm |
| Weight | kg/1000 pcs column carried verbatim from the source (0.02 → 14) |
| Hardness / finish | Not tabulated by the collected specification — per RFQ (state the mating substrate for tooth-bite suitability) |
| Attribute | 1.7 | 2.2 | 2.7 |
|---|---|---|---|
| d — min=nominal size | 1.7 | 2.2 | 2.7 |
| d — max | 1.84 | 2.34 | 2.84 |
| d c — max=nominal size | 3.6 | 4.5 | 5.5 |
| d c — min | 3.3 | 4.2 | 5.2 |
| Number of Teeth — min | 7 | 7 | 7 |
| t | 0.3 | 0.3 | 0.4 |
| per 1000 units≈kg | 0.02 | 0.03 | 0.045 |
| For Nominal Thread Diameter | M1.6 | M2 | M2.5 |
- Row 8 (For Nominal Thread Diameter): The thread-diameter mapping renders as a footer row at the bottom of each source table (header-style row printed last) — carried in place, not re-ordered into the header.
| Attribute | 3.2 | 3.7 | 4.3 |
|---|---|---|---|
| d — min=nominal size | 3.2 | 3.7 | 4.3 |
| d — max | 3.38 | 3.88 | 4.48 |
| d c — max=nominal size | 6 | 7 | 8 |
| d c — min | 5.7 | 6.64 | 7.64 |
| Number of Teeth — min | 7 | 8 | 8 |
| t | 0.4 | 0.5 | 0.5 |
| per 1000 units≈kg | 0.06 | 0.11 | 0.14 |
| For Nominal Thread Diameter | M3 | M3.5 | M4 |
| Attribute | 5.3 | 6.4 | 7.4 |
|---|---|---|---|
| d — min=nominal size | 5.3 | 6.4 | 7.4 |
| d — max | 5.48 | 6.62 | 7.62 |
| d c — max=nominal size | 10 | 11 | 12.5 |
| d c — min | 9.64 | 10.57 | 12.07 |
| Number of Teeth — min | 8 | 9 | 10 |
| t | 0.6 | 0.7 | 0.8 |
| per 1000 units≈kg | 0.28 | 0.36 | 0.5 |
| For Nominal Thread Diameter | M5 | M6 | M7 |
| Attribute | 8.4 | 10.5 | 13 |
|---|---|---|---|
| d — min=nominal size | 8.4 | 10.5 | 13 |
| d — max | 8.62 | 10.77 | 13.27 |
| d c — max=nominal size | 15 | 18 | 20.5 |
| d c — min | 14.57 | 17.57 | 19.98 |
| Number of Teeth — min | 10 | 12 | 12 |
| t | 0.8 | 0.9 | 1 |
| per 1000 units≈kg | 0.8 | 1.25 | 1.6 |
| For Nominal Thread Diameter | M8 | M10 | M12 |
| Attribute | 15 | 17 | 19 |
|---|---|---|---|
| d — min=nominal size | 15 | 17 | 19 |
| d — max | 15.27 | 17.27 | 19.33 |
| d c — max=nominal size | 24 | 26 | 30 |
| d c — min | 23.48 | 25.48 | 29.48 |
| Number of Teeth — min | 14 | 14 | 14 |
| t | 1 | 1.2 | 1.4 |
| per 1000 units≈kg | 2.3 | 2.9 | 5 |
| For Nominal Thread Diameter | M14 | M16 | M18 |
| Attribute | 21 | 23 | 25 |
|---|---|---|---|
| d — min=nominal size | 21 | 23 | 25 |
| d — max | 21.33 | 23.33 | 25.33 |
| d c — max=nominal size | 33 | 36 | 38 |
| d c — min | 32.38 | 35.38 | 37.38 |
| Number of Teeth — min | 16 | 16 | 16 |
| t | 1.4 | 1.5 | 1.5 |
| per 1000 units≈kg | 6 | 7.5 | 8 |
| For Nominal Thread Diameter | M20 | M22 | M24 |
| Attribute | 28 | 31 |
|---|---|---|
| d — min=nominal size | 28 | 31 |
| d — max | 28.33 | 31.39 |
| d c — max=nominal size | 44 | 48 |
| d c — min | 43.38 | 47.38 |
| Number of Teeth — min | 18 | 18 |
| t | 1.6 | 1.6 |
| per 1000 units≈kg | 12 | 14 |
| For Nominal Thread Diameter | M27 | M30 |
Materials
- Material specified per RFQ — serrated lock washers are usually spring steel (often through-hardened); the collected table does not tabulate temper, hardness or finish, so state the joint materials and environment at quotation
Ordering & documentation
Documents
Shipments of DIN 6798 J Serrated Lock Washers (Type J) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6798 J Serrated Lock Washers (Type J) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6798 J Serrated Lock Washers (Type J)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 6798 J Serrated Lock Washers (Type J): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 6798 j serrated lock washers (type j) is 10,000 pieces (applies to the standard sizes and finishes for din 6798 j serrated lock washers (type j); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6798 j serrated lock washers (type j) run 3–7 days. Quantities or variants of din 6798 j serrated lock washers (type j) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6798 J Serrated Lock Washers (Type J) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6798 j serrated lock washers (type j) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Type J or type V serrated washer — how do I choose?
By the head that sits on it. Type J is the flat form — the teeth bite a flat bearing face under a hex head or nut, which is the ordinary machine-joint case. Type V is the countersunk form: a bevelled washer matched to countersunk and raised-countersunk heads, where a flat washer would seat only on the head's rim and leave the cone unsupported. Compare the two ladders in this catalog and the geometry difference is visible — the V form carries a single outside-diameter and thickness value per size (no min/max split) and different tooth counts at the same nominal size (10 teeth minimum at size 2.2 versus the J form's 7 at size 1.7 — the forms are tabulated on their own size series). Both share the fail-closed evidence line: neither collected table prints hardness or finish, so tooth substrate and coating go on the RFQ.
What is the MOQ and lead time for DIN 6798 J Serrated Lock Washers (Type J)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 6798 J Serrated Lock Washers (Type J) state?
State the full designation (DIN 6798 type J), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6798 J Serrated Lock Washers (Type J) inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your DIN 6798 J Serrated Lock Washers (Type J)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support