DIN 6916 Plain Chamfered Washers
DIN 6916 plain chamfered washers for high-strength structural bolting, system HV — thread sizes M12 to M36, the chamfered hardened washer of the German HV set (the DIN-era counterpart to EN 14399-6), with the collected geometry ladder and the kg/1000 pcs figures.
Last updated: 2026-11
Specifications
DIN 6916 is the German-system HV structural washer — same job as EN 14399-6 (chamfered bearing face under the head or nut of a preloaded friction-grip set) and, on the collected ladder, the same M12 → M36 size run with nearly identical geometry: the M20 washer bores 21–21.33 mm on a 37 mm outside diameter at 4 mm nominal thickness in both standards. The practical differences are the ordering conventions and the ladder details — DIN 6916 prints an approximate chamfer value (single ≈ row rather than the EN table's min/max), and the source carries a kg/1000 pcs column (7.03 kg at M12 up to 115 kg at M36) that matters when the order is crates of washers for a steel yard. Where the assembly is specified in the European EN 14399 set, use the EN 14399-6 page in this catalog; where drawings name DIN 6916, order from this ladder by thread size. Property class, hardness and finish are not tabulated by the collected specification — per RFQ.
| Standard | DIN 6916 — plain chamfered washers for high-strength structural bolting, system HV |
|---|---|
| Size range | Thread M12 – M36, eight sizes in the collected ladder |
| Hole diameter | d: 13 – 37 mm min, 13.27 – 37.62 mm max across the ladder |
| Outside diameter | d c: 24 – 66 mm max (min/max per size in the table) |
| Thickness | h: 3 → 6 mm nominal, min/max per size as printed |
| Weight | kg/1000 pcs column carried verbatim from the source (7.03 → 115) |
| Property class / finish | Not tabulated by the collected specification — per RFQ |
| Attribute | M12 | M16 | M20 | M22 |
|---|---|---|---|---|
| d — min=nominal size | 13 | 17 | 21 | 23 |
| d — max | 13.27 | 17.27 | 21.33 | 23.33 |
| d c — max=nominal size | 24 | 30 | 37 | 39 |
| d c — min | 23.48 | 29.48 | 36.38 | 38.38 |
| h — Nominal Size | 3 | 4 | 4 | 4 |
| h — max | 3.3 | 4.3 | 4.3 | 4.3 |
| min | 2.7 | 3.7 | 3.7 | 3.7 |
| c — min=nominal size | 1.6 | 1.6 | 2 | 2 |
| c — max | 1.9 | 1.9 | 2.5 | 2.5 |
| e — ≈ | 0.5 | 1 | 1 | 1 |
| per 1000 units ≈ kg | 7.03 | 14.6 | 19.6 | 24.3 |
- Row 7 (min): Continuation "min" row under the h rowspan cell — the h minimum for every size in this chunk; transcribed as rendered.
- Row 10 (e — ≈): The source carries e as a single "≈" (approximate) row — no min/max split for the chamfer value.
| Attribute | M24 | M27 | M30 | M36 |
|---|---|---|---|---|
| d — min=nominal size | 25 | 28 | 31 | 37 |
| d — max | 25.33 | 28.52 | 31.62 | 37.62 |
| d c — max=nominal size | 44 | 50 | 56 | 66 |
| d c — min | 43.38 | 49 | 54.8 | 64.8 |
| h — Nominal Size | 4 | 5 | 5 | 6 |
| h — max | 4.3 | 5.6 | 5.6 | 6.6 |
| min | 3.7 | 4.4 | 4.4 | 5.4 |
| c — min=nominal size | 2 | 2.5 | 2.5 | 3 |
| c — max | 2.5 | 3 | 3 | 3.5 |
| e — ≈ | 1 | 1 | 1 | 1.5 |
| per 1000 units ≈ kg | 30.6 | 50.2 | 63.2 | 115 |
Materials
- Material and hardness specified per RFQ — hardened steel matched to the HV bolt set; state the assembly and any galvanizing on the RFQ and the pairing is confirmed at quotation
Ordering & documentation
Documents
Shipments of DIN 6916 Plain Chamfered Washers are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6916 Plain Chamfered Washers orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6916 Plain Chamfered Washers), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 6916 Plain Chamfered Washers: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 6916 plain chamfered washers is 10,000 pieces (applies to the standard sizes and finishes for din 6916 plain chamfered washers; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6916 plain chamfered washers run 3–7 days. Quantities or variants of din 6916 plain chamfered washers outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6916 Plain Chamfered Washers are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6916 plain chamfered washers dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Are DIN 6916 and EN 14399-6 washers interchangeable?
On the collected geometry, effectively yes for the shared sizes: compare the two ladders in this catalog and the hole, outside-diameter and thickness figures match at every size from M12 through M36 (the M27 washer, say, is a 28–28.52 mm bore on a 50 mm outside diameter at 5 mm nominal in both tables). The differences live in the paperwork and the fine print — the EN standard is the current designation with a defined system-HV pairing to EN 14399-4 bolts, while DIN 6916 is the legacy German designation many mill drawings still call up — and the chamfer rows differ in presentation (the EN table splits e and c into min/max, the DIN table prints a single approximate chamfer). Order by the designation your drawing names; where a mixed set is proposed, confirm the pairing at quotation because neither collected table tabulates hardness or finish.
What is the MOQ and lead time for DIN 6916 Plain Chamfered Washers?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 6916 Plain Chamfered Washers state?
State the full designation (DIN 6916), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6916 Plain Chamfered Washers inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your DIN 6916 Plain Chamfered Washers
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support