ISO 7093 Plain Washers (Outer Diameter About 3 d)
ISO 7093 large-series plain washers — outer diameter about 3× the thread, M2,5 to M36, the wide bearing face for soft or oversize holes, with the collected d1/d2/h ladder and kg/1000 weights.
Last updated: 2026-11
Specifications
ISO 7093 is the large-series washer: its outside diameter is set at about three times the thread nominal (15 mm at M5, 30 mm at M10, 60 mm at M22), tripling the bearing face of a normal-series washer so that soft substrates, slotted or oversize holes, and plastics do not pull the head through. The collected ladder runs M2,5 to M36 with bore min/max, outside max/min, thickness nominal/max/min and kg/1000 weights (0,28 at the small end to 522 kg at M36). Thickness also scales with the series — 1,2 mm nominal at M5 against the normal series' 1 mm — because a wide thin washer dishes under load. Read the ladder by thread: each nominal size maps to its thread in the "For thread" column, and the bore still runs a hair over nominal for clearance. The companion small series (ISO 7092) and normal series (ISO 7089/7090) are in this catalog when the bearing face you need is smaller. Material and finish are not tabulated by the collected specification — per RFQ (name the substrate the washer bears on; soft substrates often drive a coated or hardened choice that the table does not cover).
| Standard | ISO 7093 — plain washers, large series, outer diameter about 3 d |
|---|---|
| Size range | Nominal sizes 2,7 – 39, mapped to threads M2,5 – M36 per the source's "For thread" column |
| Hole diameter | d1: min. = nominal, max. per size (e.g. M10: 10,5 / 10,77 mm) |
| Outside diameter | d2: max. = nominal, min. per size — about 3× the thread (M10: 30 / 29,48 mm) |
| Thickness | h: nominal / max. / min. per size (e.g. M10: 2,5 / 2,7 / 2,3 mm) |
| Weight | kg/1000 pcs column carried verbatim (0,28 → 522) |
| Material / finish | Not tabulated by the collected specification — per RFQ |
| Nominal size | For thread | d1 min. = Nominal | d1 max. | d2 max. = Nominal | d2 min. | h Nominal | h max. | h min. | Weight kg/1000pcs |
|---|---|---|---|---|---|---|---|---|---|
| 2,7 | M2,5 | 2,7 | 2,84 | 8 | 7,64 | 0,8 | 0,9 | 0,7 | 0,28 |
| 3,2 | M3 | 3,2 | 3,38 | 9 | 8,64 | 0,8 | 0,9 | 0,7 | 0,349 |
| 3,7 | M3,5 | 3,7 | 3,88 | 11 | 10,57 | 0,8 | 0,9 | 0,7 | 0,529 |
| 4,3 | M4 | 4,3 | 4,48 | 12 | 11,57 | 1 | 1,1 | 0,9 | 0,774 |
| 5,3 | M5 | 5,3 | 5,48 | 15 | 14,57 | 1,2 | 1,4 | 1 | 1,46 |
| 6,4 | M6 | 6,4 | 6,62 | 18 | 17,57 | 1,6 | 1,8 | 1,4 | 2,79 |
| 7,4 | M7 | 7,4 | 7,62 | 22 | 21,48 | 2 | 2,2 | 1,8 | 5,29 |
| 8,4 | M8 | 8,4 | 8,62 | 24 | 23,48 | 2 | 2,2 | 1,8 | 6,23 |
| 10,5 | M10 | 10,5 | 10,77 | 30 | 29,48 | 2,5 | 2,7 | 2,3 | 12,2 |
| 13 | M12 | 13 | 13,27 | 37 | 36,38 | 3 | 3,3 | 2,7 | 22,2 |
| 15 | M14 | 15 | 15,27 | 44 | 43,38 | 3 | 3,3 | 2,7 | 31,6 |
| 17 | M16 | 17 | 17,27 | 50 | 49,38 | 3 | 3,3 | 2,7 | 40,9 |
| 20 | M18 | 20 | 20,52 | 56 | 54,1 | 4 | 4,6 | 3,4 | 67,4 |
| 22 | M20 | 22 | 22,52 | 60 | 58,1 | 4 | 4,6 | 3,4 | 76,8 |
| 26 | M24 | 26 | 26,84 | 72 | 70,1 | 5 | 6 | 4 | 139 |
| 33 | M30 | 33 | 34 | 92 | 89,8 | 6 | 7 | 5 | 273 |
| 39 | M36 | 39 | 40 | 110 | 107,8 | 8 | 9,2 | 6,8 | 522 |
Materials
- Material and finish specified per RFQ — large-series washers bear on soft or fragile substrates; state the substrate and load at quotation
Ordering & documentation
Documents
Shipments of ISO 7093 Plain Washers (Outer Diameter About 3 d) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 7093 Plain Washers (Outer Diameter About 3 d) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 7093 Plain Washers (Outer Diameter About 3 d)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ISO 7093 Plain Washers (Outer Diameter About 3 d): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for iso 7093 plain washers (outer diameter about 3 d) is 10,000 pieces (applies to the standard sizes and finishes for iso 7093 plain washers (outer diameter about 3 d); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 7093 plain washers (outer diameter about 3 d) run 3–7 days. Quantities or variants of iso 7093 plain washers (outer diameter about 3 d) outside the standard range are confirmed at quotation.
Storage & shipping
ISO 7093 Plain Washers (Outer Diameter About 3 d) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 7093 plain washers (outer diameter about 3 d) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How much more bearing face does the 3 d series actually give me?
Roughly twice the diameter and four times the area of a normal-series washer. The collected ladders put numbers on it at M10: outside diameter 30 mm here against 20 mm for ISO 7089/7090 and 18 mm for the ISO 7092 small series. Pressure under the head falls by the same ratio, which is what matters when the joint clamps aluminium, GRP, timber or a slotted hole. The series also thickens with the face — 2,5 mm nominal at M10 here against 2 mm in the normal series — so the wider ring does not dish under the same clamp. Weights scale accordingly (12,2 kg/1000 at M10 here, against 4,1-class on the normal page), which is the honest cost of the face. Steel grade, hardness and coating are not tabulated by the source — per RFQ.
What is the MOQ and lead time for ISO 7093 Plain Washers (Outer Diameter About 3 d)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 7093 Plain Washers (Outer Diameter About 3 d) state?
State the full designation (ISO 7093), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 7093 Plain Washers (Outer Diameter About 3 d) inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your ISO 7093 Plain Washers (Outer Diameter About 3 d)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support