ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in)

ASME B18.21.1 helical spring lock washer dimensions for inch-series bolts — inside diameter, outside diameter and thickness per nominal size from 0.072 to 4 in, with the sections and load values the source prints, transcribed row-for-row.

Last updated: 2026-11

Request a Quote

ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in) in an industrial setting
Illustrative image redrawn from real ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in) product references — not a photograph of stocked items.

Specifications

The helical spring lock washer is the split-ring classic: a helix of spring steel section that flattens under the nut and pushes back, maintaining preload and biting the bearing faces to resist loosening under vibration and small joint movements. ASME B18.21.1 tabulates it per nominal size, and the collected chart carries ID, OD and thickness max/min from 0.072 up to 4 in — reading a row, the 1/2 in size: ID 0.531/0.515 in, OD 0.938/0.906 in, thickness 0.125/0.112 in. Two working details matter in ordering. First, material: the lock washer is a spring by function, so it must be through-hardened spring steel (or stainless of suitable grade) — a soft-carbon split washer flattens and stays flat, delivering nothing; hardness and material are not tabulated by the collected chart and are an RFQ line. Second, direction of use: the washer's free ends face outward and the nut compresses the helix — assembly guidance, not a dimension, but the classic field error. Where the joint is truly dynamic (thermal cycling, rotating equipment), a split washer alone is often not the answer and engineered locking hardware is the conversation; the chart gives the geometry, the locking strategy is per RFQ.

Standard ASME B18.21.1 — helical spring lock washers, inch series
Size range Nominal bolt sizes 0.072 – 4 in, 37 printed rows
Tabulated limits (in) Per row: inside diameter max/min, outside diameter max/min, thickness max/min; example 1/2 in: ID 0.531/0.515, OD 0.938/0.906, thickness 0.125/0.112
Function Helical split ring — flattens under nut torque and maintains spring force against the bearing faces; ends face outward on assembly
Hardness / finish / material Not tabulated by the collected chart — per RFQ; a functional lock washer requires through-hardened spring material — state material, hardness and finish together
ASME B18.21.1 helical spring-lock washers, regular standard series (inch) — per-size dimensionsAll dimensions in inches. Nominal size is the nominal thread diameter (decimal in parentheses). A = inside diameter (max/min); B = maximum outside diameter; T = minimum mean section thickness (ti + to)/2; W = minimum section width; BW = minimum bearing width.
Nominal Size (thread dia.)A — Inside Dia. (max)A (min)B — Outside Dia. (max)T — Min. Mean Section Thickness (ti+to)/2W — Min. Section WidthBW — Min. Bearing Width
No.2 (0.086)0.0940.0880.1720.0200.0350.024
No.3 (0.099)0.1070.1010.1950.0250.0400.028
No.4 (0.112)0.1200.1140.2090.0250.0400.028
No.5 (0.125)0.1330.1270.2360.0310.0470.033
No.6 (0.138)0.1480.1410.2500.0310.0470.033
No.8 (0.164)0.1740.1670.2930.0400.0550.038
No.10 (0.190)0.2000.1930.3340.0470.0620.043
No.12 (0.216)0.2270.2200.3770.0560.0700.049
1/4 (0.250)0.2600.2520.4870.0620.1090.076
5/16 (0.3125)0.3220.3140.5830.0780.1250.087
3/8 (0.375)0.3850.3770.6800.0940.1410.099
7/16 (0.4375)0.4500.4400.7760.1090.1560.109
1/2 (0.500)0.5120.5020.8690.1250.1710.120
9/16 (0.5625)0.5740.5640.9650.1410.1880.132
5/8 (0.625)0.6410.6281.0730.1560.2030.142
11/16 (0.6875)0.7040.6911.1700.1720.2190.153
3/4 (0.750)0.7660.7531.2650.1880.2340.164
13/16 (0.8125)0.8320.8161.3630.2030.2500.175
7/8 (0.875)0.8940.8781.4590.2190.2660.186
15/16 (0.9375)0.9580.9411.5560.2340.2810.197
1 (1.000)1.0241.0031.6560.2500.2970.208
1 1/16 (1.0625)1.0871.0661.7510.2660.3120.218
1 1/8 (1.125)1.1531.1291.8470.2810.3280.230
1 3/16 (1.1875)1.2171.1921.9430.2970.3440.241
1 1/4 (1.250)1.2801.2542.0360.3120.3590.251
1 5/16 (1.3125)1.3441.3172.1330.3280.3750.262
1 3/8 (1.375)1.4081.3792.2190.3440.3910.274
1 7/16 (1.4375)1.4721.4422.3240.3590.4060.284
1 1/2 (1.500)1.5341.5042.4190.3750.4220.295
1 5/8 (1.625)1.6631.6332.5530.3890.4240.297
1 3/4 (1.750)1.7891.7582.6790.3890.4240.297
1 7/8 (1.875)1.9141.8832.8110.4220.4270.299
2 (2.000)2.0392.0082.9360.4220.4270.299
2 1/4 (2.250)2.2932.2623.2210.4400.4420.309
2 1/2 (2.500)2.5432.5123.4710.4400.4420.309
2 3/4 (2.750)2.7932.7623.8240.4580.4910.344
3 (3.000)3.0433.0124.0740.4580.4910.344

Materials

  • Spring-grade through-hardened steel or stainless is the functional requirement — soft material defeats the washer's purpose; specify hardness range at RFQ

Ordering & documentation

Documents

Shipments of ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for asme b18.21.1 helical spring lock washers — inch series (0.072 – 4 in) is 10,000 pieces (applies to the standard sizes and finishes for asme b18.21.1 helical spring lock washers — inch series (0.072 – 4 in); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.21.1 helical spring lock washers — inch series (0.072 – 4 in) run 3–7 days. Quantities or variants of asme b18.21.1 helical spring lock washers — inch series (0.072 – 4 in) outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.21.1 helical spring lock washers — inch series (0.072 – 4 in) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Does a helical spring lock washer actually prevent loosening, and what should I specify so it can?

It earns its keep on a specific class of problem: joints with small, frequent relative movements — vibration from motors, compressors, panel-mounted hardware — where the split ring's spring force keeps the nut loaded between micro-slips and its edges bite the bearing surfaces. What it does not do is replace proper preload: an under-torqued joint or one with a short bolt (low stretch, so joint movement eats the clamp quickly) will loosen with any washer hardware, and on long-credentialed dynamic joints (rotating equipment, thermal cycling), engineered solutions — nord-lock style pairs, prevailing-torque nuts, cotter hardware — outperform the split ring. The specification that makes the washer able to do its job is material: the collected chart gives geometry only, so hardness and spring-grade material arrive at RFQ, and this is the line most often missed in procurement — a soft split washer is geometry without function. Practical ordering: match the washer size to the bolt (the chart's ID limits show the fit is a snug slide, not a press), assemble ends-out, torque to the joint's spec, and for anything beyond light-duty vibration, name the locking strategy on the drawing rather than defaulting to hardware.

What is the MOQ and lead time for washers on this standard?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common inch sizes are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in) inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your ASME B18.21.1 Helical Spring Lock Washers — Inch Series (0.072 – 4 in)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.