ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type)

ANSI/ASME B18.15 shoulder-type lifting eye bolts, nominal 1/4″–1-3/4″ — machinery eye bolts with a turned shoulder that seats to carry angled lifts, with the collected per-size tables: d s, Type A/B shoulder lengths L 1, eye d 1, d k, hole d 0, overall L, thread b and k.

Last updated: 2026-11

Request a Quote

ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) in an industrial setting
Illustrative image redrawn from real ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) product references — not a photograph of stocked items.

Specifications

The shoulder-type machinery eye bolt is the rigging point you thread into a tapped hole: the collar (shoulder) under the ring seats flush against the mounting surface, and that seat is what lets the eye take loads at an angle — a plain eye bolt without a shoulder is derated drastically off-vertical, while a properly seated shoulder pattern keeps most of its capacity to 45° per the rigging practice the standard serves. ANSI/ASME B18.15 is its inch-series home. The collected tables run nominal 1/4″ to 1-3/4″, and they expose the series' structure honestly: each nominal diameter appears in two column groups with different shoulder diameters d s and different Type A / Type B shoulder lengths L 1 and thread lengths b — two executions of the same nominal size, not legended on the collected page (see the table footnote), which is exactly the detail to confirm against the tapped hole before ordering. Per size the tables carry shoulder length L 1 (Type A/B), eye outside diameter d 1, eye thickness d k, hole diameter d 0, overall length L, thread length b (Type A/B) and eye section k. Working loads are not tabulated by the collected specification — rigging capacities come from the manufacturer's rated load chart and stay per RFQ.

Standard ANSI/ASME B18.15 — lifting eye bolts, shoulder type (machinery eye bolts, inch series)
Series Nominal 1/4″ – 1-3/4″ (ten source column groups; each nominal appears in two groups with differing d s / L 1 / b — see table footnote)
Tabulated geometry Per column: d s shoulder diameter; L 1 shoulder length (Type A / Type B); d 1 eye outside diameter; d k eye thickness; d 0 hole diameter; L overall length; b thread length (Type A / Type B); k eye section height
Rigging duty Shoulder seats against the mounting face to support angled lifts; capacity is a rated-load matter — not tabulated by the collected specification, per RFQ (state intended sling angle and proof-test requirements)
Materials Not tabulated by the collected specification — per RFQ (forged carbon steel is the norm; state finish and certification)
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (1/4 - 5/16)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute1/41/45/16
d s0.250.280.31
L 1 — Type A11.061.12
Type B11.061.06
d 10.690.810.81
d k1.191.191.44
d 00.190.250.25
L2.222.532.66
b — Type A0.750.750.81
Type B0.750.750.75
k0.120.190.12
  • Row 1 (d s): The source tabulates two column groups per nominal diameter (1/4, 1/4, 5/16 …) with different d s values and different Type A/B L 1 and b — the split is not legended on the collected page; quote the exact d s when ordering.
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (5/16 - 3/8)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute5/163/83/8
d s0.340.380.41
L 1 — Type A1.191.251.38
Type B1.131.121.25
d 10.940.941.06
d k1.441.691.69
d 00.310.310.38
L2.973.093.47
b — Type A0.810.880.88
Type B0.750.750.75
k0.190.120.19
  • Row 1 (d s): The source repeats each nominal diameter (two column groups per size with differing d s and L 1/b values) with no legend for the split — kept verbatim; quote the exact d s when ordering.
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (7/16 - 1/2)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute7/167/161/2
d s0.440.470.5
L 1 — Type A1.381.51.5
Type B1.131.251.13
d 111.121.12
d k1.811.812.12
d 00.340.410.44
L3.413.783.81
b — Type A111.12
Type B0.750.750.75
k0.190.250.19
  • Row 1 (d s): The source repeats each nominal diameter (two column groups per size with differing d s and L 1/b values) with no legend for the split — kept verbatim; quote the exact d s when ordering.
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (1/2 - 9/16)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute1/29/169/16
d s0.530.560.59
L 1 — Type A1.621.621.75
Type B1.251.211.34
d 11.251.191.31
d k2.122.252.25
d 00.50.470.53
L4.194.194.56
b — Type A1.121.251.25
Type B0.750.840.84
k0.250.220.28
  • Row 1 (d s): The source repeats each nominal diameter (two column groups per size with differing d s and L 1/b values) with no legend for the split — kept verbatim; quote the exact d s when ordering.
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (5/8 - 3/4)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute5/85/83/4
d s0.620.660.75
L 1 — Type A1.751.882
Type B1.311.441.5
d 11.311.441.44
d k2.562.562.81
d 00.560.620.62
L4.564.945.06
b — Type A1.381.381.62
Type B0.940.941.12
k0.250.310.25
  • Row 1 (d s): The source repeats each nominal diameter (two column groups per size with differing d s and L 1/b values) with no legend for the split — kept verbatim; quote the exact d s when ordering.
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (3/4 - 7/8)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute3/47/87/8
d s0.780.880.91
L 1 — Type A2.122.252.38
Type B1.621.751.88
d 11.561.561.69
d k2.813.193.19
d 00.690.750.81
L5.55.756.19
b — Type A1.621.811.81
Type B1.121.311.31
k0.310.310.38
  • Row 1 (d s): The source repeats each nominal diameter (two column groups per size with differing d s and L 1/b values) with no legend for the split — kept verbatim; quote the exact d s when ordering.
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (1 - 1-1/8)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute111-1/8
d s11.061.12
L 1 — Type A2.52.622.75
Type B1.942.062.13
d 11.691.811.94
d k3.563.564.06
d 00.880.941
L6.446.887.31
b — Type A2.082.082.31
Type B1.51.51.69
k0.380.440.44
  • Row 1 (d s): The source repeats each nominal diameter (two column groups per size with differing d s and L 1/b values) with no legend for the split — kept verbatim; quote the exact d s when ordering.
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (1-1/8 - 1-1/4)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute1-1/81-1/41-1/4
d s1.191.251.34
L 1 — Type A2.8833.12
Type B2.262.382.5
d 12.062.122.25
d k4.064.444.44
d 01.061.091.16
L7.7588.44
b — Type A2.312.52.5
Type B1.691.881.88
k0.50.50.56
  • Row 1 (d s): The source repeats each nominal diameter (two column groups per size with differing d s and L 1/b values) with no legend for the split — kept verbatim; quote the exact d s when ordering.
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (1-1/2 - 1-3/4)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute1-1/21-1/21-3/4
d s1.51.591.75
L 1 — Type A3.53.623.75
Type B2.752.873.18
d 12.442.562.75
d k5.195.196
d 01.311.381.5
L9.229.7210.5
b — Type A333.19
Type B2.252.252.62
k0.50.620.5
  • Row 1 (d s): The source repeats each nominal diameter (two column groups per size with differing d s and L 1/b values) with no legend for the split — kept verbatim; quote the exact d s when ordering.
ANSI/ASME B18.15 lifting eye bolts (shoulder type) - per-size dimensions (1-3/4 - 2)All dimensions in inches. Attribute labels follow the source: d s = shoulder diameter; L 1 = shoulder length, split into Type A / Type B as printed; d 1 = eye outside diameter; d k = eye thickness; d 0 = hole diameter; L = overall length; b = thread length, split into Type A / Type B; k = eye section height.
Attribute1-3/422
d s1.8422.09
L 1 — Type A3.8844.12
Type B3.313.623.79
d 133.063.44
d k66.886.88
d 01.621.751.88
L11.1211.5312.22
b — Type A3.193.383.38
Type B2.6233
k0.620.620.75
  • Row 1 (d s): The source repeats each nominal diameter (two column groups per size with differing d s and L 1/b values) with no legend for the split — kept verbatim; quote the exact d s when ordering.

Materials

  • Material, finish and rated load specified per RFQ — lifting hardware ships with the manufacturer's rated-load documentation; confirm sling angle and testing at quotation

Ordering & documentation

Documents

Shipments of ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for ansi/asme b18.15 lifting eye bolts (shoulder type) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for ansi/asme b18.15 lifting eye bolts (shoulder type); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for ansi/asme b18.15 lifting eye bolts (shoulder type) run 3–7 days. High-strength and custom parts for ansi/asme b18.15 lifting eye bolts (shoulder type) run 15–25 days. Quantities or variants of ansi/asme b18.15 lifting eye bolts (shoulder type) outside the standard range are confirmed at quotation.

Storage & shipping

ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store ansi/asme b18.15 lifting eye bolts (shoulder type) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What must be true before a shoulder eye bolt takes an angled load?

Three things, and the geometry in the collected tables is only the first. First, the seat: the shoulder must bear fully on a flat, machined surface — the L 1 shoulder lengths (Type A/B, 0.75″–3.75″ in the collected tables) exist so the collar reaches a properly prepared seat; on a rough or curved face the shoulder cannot seat and the bolt must not be angle-loaded. Second, the thread engagement: the collected tables print thread lengths b per type — the tapped hole must take the full b (and the two column groups per nominal size differ here; see the table footnote and match the exact d s to your hole). Third, the load rating: the collected specification tabulates geometry only, so the working load for the planned sling angle comes from the manufacturer's rated-load chart, reduced per rigging practice for the angle, with side-loading avoided or specially rated. When ordering, state nominal size with the shoulder diameter, the tapped hole, the finish, and whether proof certificates are required — lifting points are confirmed hardware, not commodity bolts.

What is the MOQ and lead time for this bolt type?

The minimum order quantity for ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) is 1,000–10,000 pieces depending on size. Stock items of ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) ship in 3–7 days; high-strength and custom parts in 15–25 days. Common sizes of ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type)?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) state?

State the full designation (ANSI/ASME B18.15), thread size and pitch or diameter, length or head dimension, strength class or material (Not tabulated by the collected specification — per RFQ (forged carbon steel is the norm; state finish and certification)), finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your ANSI/ASME B18.15 Lifting Eye Bolts (Shoulder Type)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.