DIN 186 T-Head Bolts
DIN 186 T-head bolts, M6 to M48 — the head shaped to slot into T-slots and channels so the bolt can clamp without nut access — with the full collected 11-size table: pitch, shaft and head geometry, radii and the source's three thread-length bands.
Last updated: 2026-11
Specifications
A DIN 186 T-head bolt drops into a T-slot or continuous channel and locks with a quarter turn: the rectangular head cannot rotate, so the bolt is tightened from the nut side alone — or from the head side when the channel carries the thread. That makes it the fastener of machine tables, extruded aluminum framing, solar-mounting channels and any assembly where only one face is reachable. The collected table covers M6 to M48 — 11 sizes — with thread pitch P, shaft diameter d s (Nominal Size / max / min), head height k, head width n, head-to-bearing length m (Nominal Size / min / max), the r 1 ≈ and r 2 radii, and the source's three thread-length bands b 1 / b 2 / b 3 reproduced verbatim. Materials and property classes are not printed by the collected specification and stay per RFQ. For slot nuts that pair with these bolts see DIN 508 T-slot nuts on this site.
| Standard | DIN 186 — T-head bolts (for T-slots and construction channels) |
|---|---|
| Series | M6 – M48 (11 sizes tabulated) |
| Tabulated geometry | Per size: pitch P, shaft diameter d s (Nominal Size / max / min), head height k, head width n, head-to-bearing length m (Nominal Size / min / max), radii r 1 ≈ / r 2, thread-length bands b 1 / b 2 / b 3 |
| Function | T-head seats in the slot and cannot rotate — single-side clamping in channels and tables |
| Family note | Pairs with DIN 508 T-slot nuts; channel nuts for strut framing share the working principle |
| Materials / strength | Not tabulated by the collected specification — per RFQ (property class per drawing callout) |
| Screw Thread d | P — Pitch | d s — Nominal Size | d s — max | d s — min | k — Nominal Size | k — max | k — min | n — Nominal Size | n — max | n — min | m — Nominal Size | m — min | m — max | r 1 ≈ | r 2 — max | Length of Thread b — b 1 | Length of Thread b — b 2 | Length of Thread b — b 3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M6 | 1 | 6 | 6.48 | 5.52 | 4.5 | 4.9 | 4.1 | 6 | 6.6 | 5.4 | 16 | 15.1 | 16.9 | 0.5 | 0.9 | 18 | 24 | 37 |
| M8 | 1.25 | 8 | 8.58 | 7.42 | 5.5 | 5.9 | 5.1 | 8 | 8.75 | 7.25 | 18 | 17.1 | 18.9 | 0.5 | 1.2 | 22 | 28 | 41 |
| M10 | 1.5 | 10 | 10.58 | 9.42 | 7 | 7.5 | 6.5 | 10 | 10.75 | 9.25 | 21 | 20 | 22 | 0.5 | 1.5 | 26 | 32 | 45 |
| M12 | 1.75 | 12 | 12.7 | 11.3 | 8 | 8.75 | 7.25 | 12 | 12.9 | 11.1 | 26 | 25 | 27 | 1 | 1.8 | 30 | 36 | 49 |
| M16 | 2 | 16 | 16.7 | 15.3 | 10.5 | 11.4 | 9.6 | 16 | 16.9 | 15.1 | 30 | 29 | 31 | 1 | 2.4 | 38 | 44 | 57 |
| M20 | 2.5 | 20 | 20.84 | 19.16 | 13 | 13.9 | 12.1 | 20 | 21 | 19 | 36 | 34.75 | 37.25 | 1 | 3 | 46 | 52 | 65 |
| M24 | 3 | 24 | 24.84 | 23.16 | 15 | 15.9 | 14.1 | 24 | 25 | 23 | 43 | 41.75 | 44.25 | 1.6 | 3.6 | 54 | 60 | 73 |
| M30 | 3.5 | 30 | 30.84 | 29.16 | 19 | 20 | 18 | 30 | 31 | 29 | 54 | 52.5 | 55.5 | 1.6 | 4.5 | 66 | 72 | 85 |
| M36 | 4 | 36 | 37 | 35 | 23 | 24 | 22 | 36 | 37.25 | 34.75 | 66 | 64.5 | 67.5 | 2 | 5.4 | 78 | 84 | 97 |
| M42 | 4.5 | 42 | 43 | 41 | 26 | 27 | 25 | 42 | 43.25 | 40.75 | 80 | 78.5 | 81.5 | 2 | 6.3 | 90 | 96 | 109 |
| M48 | 5 | 48 | 49 | 47 | 30 | 31 | 29 | 48 | 49.25 | 46.75 | 88 | 86.25 | 89.75 | 2 | 7.2 | 102 | 108 | 121 |
Materials
- Material and property class specified per RFQ — the collected specification table covers geometry only
Ordering & documentation
Documents
Shipments of DIN 186 T-Head Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 186 T-Head Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 186 T-Head Bolts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 186 T-Head Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 186 t-head bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 186 t-head bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 186 t-head bolts run 3–7 days. High-strength and custom parts for din 186 t-head bolts run 15–25 days. Quantities or variants of din 186 t-head bolts outside the standard range are confirmed at quotation.
Storage & shipping
DIN 186 T-Head Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 186 t-head bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How is a T-head bolt sized against its channel or slot?
By the head, not the thread. The head width n and height k must match the slot's opening and internal height so the head can be inserted, turned 90 degrees, and bear on the slot walls without rocking — the tabulated max/min pairs on n and k exist because that fit is a running clearance, not a press. The thread is then chosen for the clamp load and the mating nut or channel thread, with the b 1 / b 2 / b 3 bands giving the engagement lengths the source standardizes. Measure the slot first, pick the head, then the thread; buying by thread alone risks a head that will not seat square.
What is the MOQ and lead time for this bolt type?
The minimum order quantity for DIN 186 T-Head Bolts is 1,000–10,000 pieces depending on size. Stock items of DIN 186 T-Head Bolts ship in 3–7 days; high-strength and custom parts in 15–25 days. Common diameters of DIN 186 T-Head Bolts are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 186 T-Head Bolts?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 186 T-Head Bolts state?
State the full designation (DIN 186), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 186 T-Head Bolts inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your DIN 186 T-Head Bolts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support