DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30)

DIN 7990 hexagon head bolts for steel structures, M12 to M30 — the partial-thread black hex bolt of steel construction, steel grades 4.6/5.6, with the full geometry ladder (P, b, ds, dw, e, k, s, r) and a 35-row length matrix giving grip length ls and thread length lg per bolt length from 30 to 200 mm.

Last updated: 2026-11

Request a Quote

DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30) in an industrial setting
Illustrative image redrawn from real DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30) product references — not a photograph of stocked items.

Specifications

DIN 7990 is the classic steel-structure hex bolt — the large black hexagon head bolt that a structure bolt finds under its head and a heavy hex nut clamps on the other side of the girder flange. Where the registered DIN 7968 page covers the FIT bolt (a snug-machined shank for shear-loaded holes), DIN 7990 is its ordinary-bolt sibling: a rougher shank in bolt clearance holes, held by thread grip rather than fitted bearing. The collected ladder runs M12 to M30 (pitch 1,75 at M12 stepping to 3,5 at M30), head height k 8 to 19, width across flats s 19 to 46, and the partial-thread design shows in the b row — "length of the thread (at least)" 17,75 at M12 rising to 30,5 at M30 — so at a 100 mm M20 bolt roughly 69 mm of shank stays unthreaded (the length matrix prints grip ls min. 69 and thread projection lg max. 76,5). That 35-row matrix is the table a fabricator actually orders from: bolt length l 30 to 200 in 5 mm steps, with ls min. and lg max. per thread, going ragged where a thread's ladder runs out — M12 stops at l=120, M16 at 150, and the 180-200 band belongs to the big threads M22 up. Materials per the Makings panel: steel 4.6 and 5.6 — the low/medium-strength grades of structural bolting where the connection's capacity is designed around the slip factor or the nut and washer set, not the bolt's ultimate strength; thread tolerance 8g. High-strength assemblies (8.8 class) appear as live demand in the source's own inquiry ledger, not in the standard table — treated as an RFQ grade, confirmed at quotation.

Standard / scope DIN 7990 hexagon head bolts for steel structures (source title "DIN 7990 - Hexagon head bolts for steel structures"), M12 to M30; equivalent norm printed by the source: CSN 021308
Thread ladder M12 (P 1,75), M16 (2), M20 (2,5), M22 (2,5), M24 (3), M27 (3), M30 (3,5); thread tolerance 8g per the Makings panel
Head geometry Head height k nominal 8 (M12) to 19 (M30), min. 7,55 to 17,95; width across flats s nominal=max. 19 (M12) to 46 (M30), min. 18,48 to 45; head diameter e min. 20,88 to 50,85; washer-face/-bearing dw min. 17,2 to 42,7 (with the flagged 0,8 cell at M27)
Shank ds nominal = thread size (12 to 30), min. 11,3 to 29,16, max. 12,7 to 24,84 across M12-M24 (the source prints 27,84 at both M27 and M30 — flagged verbatim); transition r min. 0,6 to 1; waisted shank diameter da max. 14,7 to 35,4
Thread length b (at least) 17,75 (M12) to 30,5 (M30) — partial-thread build; the unthreaded grip at each bolt length is read from the length matrix (ls min. / lg max. per thread)
Length matrix Bolt length l 30 to 200 in 5 mm steps (35 rows), with ls min. and lg max. per thread; ragged ladder: M12 stops at l=120, M16 at 150, M20-M27 print to 175, M22-M30 run to 200
Materials Steel 4.6, 5.6 per the source Makings panel (stainless, plastic, non-ferrous print "-" — not claimed); higher-strength grades are RFQ language, not tabulated
Not tabulated No proof-load/clamping ratings, no finishes or coatings, no washer/nut pairing table (see the DIN 7968 page for the fit-bolt pairing) — confirmed at quotation
DIN 7990 head and shank geometry, M12 to M30 (dimensions in mm, per the collected page)Attribute letters per the source rows, with the source's own sub-labels (max./min./nominal) in the second column. Legend entries available on the source page: b "length of the thread (at least)", l "length of bolt", d "the nominal diameter of the thread", k "head height", s "size hex head turnkey". P, c, da, ds, dw, e, k´ and r have no legend entries (conventional metric-bolt symbols). All cells verbatim, decimal commas preserved; "dimensions in mm" per the page statement.
AttributeLimitM12M16M20M22M24M27M30
Thread dM12M16M20M22M24M27M30
P1,7522,52,5333,5
b17,752123,525,5262930,5
cmax.0,60,80,80,80,80,80,8
damax.14,718,724,426,428,432,435,4
dsnominal12162022242730
dsmin.11,315,319,1621,1623,1626,1629,16
dsmax.12,716,720,8422,8424,8427,8427,84
dwmin.17,22227,729,533,20,842,7
emin.20,8826,1732,9535,0339,5545,250,85
knominal8101314151719
kmin.7,559,2512,113,114,116,117,95
kmax.8,4510,7513,914,918,917,920,05
k´min.5,286,478,479,179,8711,2712,56
rmin.0,60,60,80,80,811
snominal=max.19243032364146
smin.18,4823,1629,1631354045
  • Row 8 (ds): ds max. prints 27,84 at BOTH M27 and M30, while ds min. at M30 is 29,16 and nominal is 30 - a max. below the min. is impossible; the ladder's own pattern (max = min + 1,5) and the duplication of M27's value suggest a copy slip at the source. Transcribed verbatim, flagged, not normalized - verify against the standard before engineering use.
  • Row 9 (dw): dw min. prints 0,8 at M27, against its neighbours 33,2 (M24) and 42,7 (M30) and the dw band elsewhere (roughly 0,95 x the s nominal: 17,2/19, 22/24, 27,7/30 ...). Verbatim, flagged, not normalized.
  • Row 13 (k): k max. prints 18,9 at M22, against k nominal 15 / min 14,1 and the neighbours' max. pattern (13,9 at M20, 17,9 at M24 - both about +0,9-1,0 over nominal, while 18,9 would be +3,9). Verbatim, flagged, not normalized.
  • Row 1 (Thread d): First row repeats the thread designations under the "Thread d" attribute - the source's own header row, carried as a data row.
  • The legend covers b/l/d/k/s only; P, c, da, ds, dw, e, k´ and r have no legend entries on the source page (read as the conventional metric-bolt symbols; "k´ min." carries the source's own prime notation).
DIN 7990 length matrix: bolt length l with grip length ls min. and thread length lg max., per thread M12 to M30 (dimensions in mm, per the collected page)Header per the source: "l" with "Nominal | min. | max." and "lengths ls and lg" spanning the per-thread pairs. Legend entries: l "length of bolt", b "length of the thread (at least)". ls/lg print no legend entries (grip and thread-projection lengths). Blank cells are the source's ragged ladder - a thread simply is not offered at that length (M12 stops at l=120, M16 at 150, M20 and M27 ladders end at 175 while M22/M30 continue to 200). All cells verbatim, decimal commas preserved.
l nominalmin.max.M12 ls min.M12 lg max.M16 ls min.M16 lg max.M20 ls min.M20 lg max.M22 ls min.M22 lg max.M24 ls min.M24 lg max.M27 ls min.M27 lg max.M30 ls min.M30 lg max.
3028,9531,05712,25
3533,7536,251217,25814
4038,7541,251722,251319916,5714,5
4543,7546,252227,2518241421,51219,51019
5048,7551,252732,2523291926,51724,51524
5553,556,53237,2528342431,52229,52029
6058,561,53742,2533392936,52734,525342231
6563,566,54247,2538443441,53239,530392736
7068,571,54752,2543493946,53744,535443241
7573,576,55257,2548544451,54249,540493746
8078,581,55762,2553594956,54754,5455442513949,5
8583,2586,756267,2558645461,55259,5505947564454,5
9088,2591,756772,2563695966,55764,5556452614959,5
9593,2596,757277,2568746471,56269,5606957665464,5
10098,25101,757782,2573796976,56774,5657462715969,5
105103,25106,758287,2578847481,57279,5707967766474,5
110108,25111,758792,2583897986,57784,5758472816979,5
115113,25116,759297,2588948491,58289,5808977867484,5
120118,25121,7597102,2593998996,58794,5859482917989,5
1251231279810494101,59299,5909987968494,5
13012813210310999106,597104,595104921018999,5
135133137108114104111,5102109,51001099710694104,5
140138142113119109116,5107114,510511410211199109,5
145143147118124114121,5112119,5110119107116104114,5
150148152123129119126,5117124,5115124112121109119,5
155151159124131,5122129,5120129117126114124,5
160156164129136,5127134,5125134122131119129,5
165161169134141,5132139,5130139127136124134,5
170166174139146,5137144,5135144132141129139,5
175171179144151,5142149,5140149137146134144,5
180176184147154,5145154142151139149,5
185180,4189,6152159,5150159147156144154,5
190185,4194,6157164,5155164152161149159,5
195190,4199,6162169,5160169157166154164,5
200195,4204,6167174,5165174163172159169,5
  • The l min./max. band scheme changes mid-ladder: through l=120 the min. runs nominal -1,05 / max. +1,75, from 125 to 150 it is -2/+2, from 155 the band widens (-4/+4 style), and from 185 it prints tolerance-style decimals (180,4/189,6 = ±4,6). Carried as printed - the bands are the source's own scheme, not adjudicated.
  • The ragged ladder itself is structural, not anomalous: longer bolts in a given thread run out where the shank can no longer hold the required thread length b (see the geometry table).
  • l=110 prints min. 108,25 / max. 111,75 in the live DOM - the band steps cleanly around it; l=155 min. 151 is consistent with the neighbouring -4 band (160 -> 156, 165 -> 161). Carried verbatim.

Materials

  • Steel grades 4.6 and 5.6 per the collected Makings panel — the structural-bolting strength classes where joint capacity comes from the connection design (slip-critical or bearing on the nut/washer set) rather than a high-tensile shank; 4.6 (Rm ~400 MPa) suits secondary and light primary steelwork, 5.6 (Rm ~500 MPa) the heavier primary connections. Stainless, plastic and non-ferrous print "-" on the source page and are quoted per RFQ, as are the 8.8-class requests visible in the source's own inquiry traffic and any hot-dip galvanized finish (galvanizing changes thread tolerance — state it on the RFQ so the nut pairing stays runnable).

Ordering & documentation

Documents

Shipments of DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 7990 hexagon head bolts for steel structures (m12 – m30) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 7990 hexagon head bolts for steel structures (m12 – m30); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7990 hexagon head bolts for steel structures (m12 – m30) run 3–7 days. High-strength and custom parts for din 7990 hexagon head bolts for steel structures (m12 – m30) run 15–25 days. Quantities or variants of din 7990 hexagon head bolts for steel structures (m12 – m30) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7990 hexagon head bolts for steel structures (m12 – m30) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 7990 or DIN 7968 — which bolt does my steel structure need?

The deciding factor is the hole and the load path. DIN 7990 is the ordinary bolt: it goes into standard clearance holes and carries the load through thread grip and friction — the everyday structural bolt for secondary steelwork and statically undemanding primary connections. DIN 7968 is the fit bolt: its machined shank fills reamed holes and takes shear directly on the shank bearing — the choice where slip cannot be tolerated (brackets, shear connections with tight displacement limits). Both pages share the M12-M30 steel-structure ladder; if your drawing calls a hole "fitted" or "reamed" it means DIN 7968, and pairing it with DIN 7990 defeats the fit. Where the drawing says nothing, DIN 7990 with its 4.6/5.6 grade and clearance hole is the default reading.

How do I use the ls/lg columns to pick my bolt length?

ls min. is the shortest guaranteed grip — the unthreaded shank inside the clamped plates; lg max. is the longest the thread can project into the joint. The rule: the thread must not sit inside the plates you are clamping (it would shear there), so choose l such that lg max. stays at or below your total clamped thickness, while l itself covers thickness plus nut height plus washer. Example from the table: an M20 bolt at l=100 prints ls min. 69 and lg max. 76,5 — so it suits a joint pack of roughly 70-76 mm; a 50 mm pack needs a shorter bolt, which the same column tells you directly (l=60 prints ls min. 29 / lg max. 36,5). Mind the ragged ladder — M12 ends at l=120 and M16 at 150, so a long small-thread bolt means a different standard or a stud, quoted per RFQ.

The table prints odd values at M27/M30 (ds max. 27,84 twice, dw 0,8, k max. 18,9) — what should I do with them?

Read them as printed but verify before engineering use. ds max. 27,84 appears at BOTH M27 and M30, yet M30's own ds min. is 29,16 and nominal 30 — a maximum below the minimum is impossible, and the duplication of M27's value points to a copy slip on the source page. dw min. 0,8 at M27 (between neighbours 33,2 and 42,7) and k max. 18,9 at M22 (nominal 15; every neighbour sits about +1 over nominal) show the same character. This page transcribes verbatim and flags rather than correcting — the corrections above are pattern inference, not source. None of the three cells affects ordering (you order by thread, length and grade), but if a machining or hole-detail decision leans on ds, dw or k at exactly M22/M27/M30, confirm those cells against the standard itself first.

What should an RFQ for DIN 7990 bolts state?

Thread and length as the designation (M20 x 100 style — the length matrix then fixes the grip), grade 4.6 or 5.6 per your connection design, finish (plain, or hot-dip galvanized — which shifts thread tolerance and needs the mating nut stated), quantity per size, and the mating nut standard so the pair ships runnable. Anything outside the table — stainless (the source prints "-"), 8.8-class assemblies, lengths past l=200, or fitted-shank requirements (that is DIN 7968 territory) — is confirmed at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 7990 Hexagon Head Bolts for Steel Structures (M12 – M30)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.