DIN 835 Double-End Studs (Screwed-In End ≈ 2 d)

Double-end metric studs to DIN 835 — the screwed-in end at approximately 2 × thread diameter, nut-end thread length tabulated by grip L, with the collected ladder M4 to M24 and the source's own end/engagement legend.

Last updated: 2026-11

Request a Quote

DIN 835 Double-End Studs (Screwed-In End ≈ 2 d) in an industrial setting
Illustrative image redrawn from real DIN 835 Double-End Studs (Screwed-In End ≈ 2 d) product references — not a photograph of stocked items.

Specifications

DIN 835 is the long-engagement end of the double-end stud trio: screwed-in end ≈ 2 d — the b 1 row doubles the DIN 938 figures at every size (24 mm at M12 against 12 mm, 48 mm at M24 against 24 mm) — for tapped holes in softer or shallower material where thread shear on the housing side governs: aluminium housings, cast iron, plastics-adjacent assemblies, or repaired threads where you want full engagement of a helical insert. The collected ladder runs M4 to M24 and carries the source's own legend for the rows (b 1 = screwed-in end, b 2 = nut end, with the L≤125 / L≤200 / L>200 grip bands), plus min/max shank diameter rows. For drawings that stop the stud family at M24, this is the tabulated ceiling of the source; larger screwed-in studs quote per drawing. Material, property class and finish are not printed by the collected specification — per RFQ.

Standard DIN 835 — double-end studs, screwed-in (metal) end ≈ 2 d
Size range M4 – M24 in the collected ladder (larger sizes not tabulated by this source — per drawing)
Screwed-in end b 1: 8 – 48 mm across the ladder (≈ 2 × d)
Nut-end engagement b by grip: L≤125 / 125<L≤200 / L>200 rows per size (14 → 73 mm)
Shank diameter d s: min/max per size (e.g. M12: 11.73 – 12 mm)
Material / property class Not tabulated by the collected specification — per RFQ
DIN 835 double-end studs, screwed-in end ≈ 2 d - attribute rows per size (M4 - (M7))All dimensions in millimetres. Attribute labels follow the source: P = pitch (coarse and fine thread variants); b 1 = screwed-in (metal) end ≈ 2 d; b = nut-end thread length by grip L (the source's own legend: b 2 1 for L ≤ 125 mm, b 2 2 for L ≤ 200 mm, b 3 for L > 200 mm); d s = stud (shank) diameter; x = thread run-out. Parenthesised sizes are the source's own non-preferred notation; "/" marks the source's empty cells. The source prints no material or property-class columns — per RFQ.
AttributeM4M5M6(M7)
P — Coarse thread0.70.811
P — Fine thread////
P — Fine thread////
b 18101214
b — L≤12514161820
b — 125<L≤20020222426
b — L>200////
d s — max4567
d s — min3.824.825.826.78
x1.7522.52.5
  • Row 7 (b — L>200): The source prints "/" for the L>200 nut-end engagement on M4-(M7) — carried verbatim.
  • Row 3 (P — Fine thread): The source carries two identically labelled "Fine thread" P rows (the second fine-pitch series) without distinguishing labels — carried verbatim; disambiguate against DIN 835 itself.
DIN 835 double-end studs, screwed-in end ≈ 2 d - attribute rows per size (M8 - M12)All dimensions in millimetres; labels and reading order as the first table.
AttributeM8M10M12
P — Coarse thread1.251.51.75
P — Fine thread11.251.25
P — Fine thread//1.5
b 1162024
b — L≤125222630
b — 125<L≤200283236
b — L>200/4549
d s — max81012
d s — min7.789.7811.73
x3.23.84.3
DIN 835 double-end studs, screwed-in end ≈ 2 d - attribute rows per size ((M14) - (M18))All dimensions in millimetres; labels and reading order as the first table.
Attribute(M14)M16(M18)
P — Coarse thread222.5
P — Fine thread1.51.51.5
P — Fine thread///
b 1283236
b — L≤125343842
b — 125<L≤200404448
b — L>200535761
d s — max141618
d s — min13.7315.7317.73
x556.3
DIN 835 double-end studs, screwed-in end ≈ 2 d - attribute rows per size (M20 - M24)All dimensions in millimetres; labels and reading order as the first table. The collected ladder stops at M24 — larger sizes are not tabulated by this source.
AttributeM20(M22)M24
P — Coarse thread2.52.53
P — Fine thread1.51.52
P — Fine thread///
b 1404448
b — L≤125465054
b — 125<L≤200525660
b — L>200656973
d s — max202224
d s — min19.6721.6723.67
x6.36.37.5

Materials

  • Material and property class specified per RFQ — long-engagement studs are usually specified to match the housing material and the mating nut class; state both at quotation

Ordering & documentation

Documents

Shipments of DIN 835 Double-End Studs (Screwed-In End ≈ 2 d) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 835 Double-End Studs (Screwed-In End ≈ 2 d) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 835 Double-End Studs (Screwed-In End ≈ 2 d)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 835 Double-End Studs (Screwed-In End ≈ 2 d): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 835 double-end studs (screwed-in end ≈ 2 d) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 835 double-end studs (screwed-in end ≈ 2 d); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 835 double-end studs (screwed-in end ≈ 2 d) run 3–7 days. High-strength and custom parts for din 835 double-end studs (screwed-in end ≈ 2 d) run 15–25 days. Quantities or variants of din 835 double-end studs (screwed-in end ≈ 2 d) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 835 Double-End Studs (Screwed-In End ≈ 2 d) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 835 double-end studs (screwed-in end ≈ 2 d) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When is the 2 d screwed-in end of DIN 835 worth the extra stud length?

When the tapped hole, not the stud, is the weak member. Doubling the engagement doubles the number of load-bearing turns, which is the standard answer for aluminium and cast-iron housings, thin-walled castings, and holes repaired with thread inserts where the insert recommendations call a minimum engagement. The cost is drilling deeper and a longer stud standing off the assembly — so on steel with sound threads, the DIN 938/939 shorter ends are the leaner choice. The collected ladder tabulates both alternatives, so the three pages in this catalog can be compared size-for-size before the RFQ.

What is the MOQ and lead time for DIN 835 Double-End Studs (Screwed-In End ≈ 2 d)?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 835 Double-End Studs (Screwed-In End ≈ 2 d) state?

State the full designation (DIN 835), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 835 Double-End Studs (Screwed-In End ≈ 2 d) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 835 Double-End Studs (Screwed-In End ≈ 2 d)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.