DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread

DIN 7964-1990 reduced shank bolts and screws with coarse thread: thread pitches P 0.45 to 3.5, thread lengths b1/b2 in type K (short) and type L (long) variants with 0 ~ +2P tolerance, and reduced shank ds max/min per pitch.

Last updated: 2026-11

Request a Quote

DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread in an industrial setting
Illustrative image redrawn from real DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread product references — not a photograph of stocked items.

Specifications

DIN 7964-1990 keys its geometry to the thread pitch rather than to the nominal size alone — the collected table runs twelve pitch columns P 0.45 to 3.5 (covering the ladder from the small screws through M24-class coarse threads) and, for each pitch, prints the reduced (unthreaded) shank ds max/min (1.9/1.7 at P 0.45 up to 24.2/24 at P 3.5) and both thread-length families: b1, the thread on the metal end, in type K short (3.2 to 38) and type L long (10 to 66), and b2, the nut end, likewise in type K (3.75 to 43) and type L (10.55 to 71) — each with the source's own 0 ~ +2P tolerance carried verbatim. The reduced shank is the point of the standard: an unthreaded body just under the pitch diameter lets the joint take shear on the smooth shank and keeps the threaded portion out of the shear plane, the same logic as a fit bolt but on nominal-clearance tolerances. Read the table by pitch — the P row doubles as the size ladder — and state the K/L variant explicitly on the RFQ, because the two thread lengths are different parts, not tolerances of one.

Standard / scope DIN 7964-1990 reduced shank bolts and screws with coarse thread — geometry tabulated per thread pitch P 0.45 to 3.5
Thread pitch P Ladder 0.45, 0.5, 0.7, 0.8, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5 — the P row doubles as the size identification
Metal-end thread b1 0 ~ +2P tolerance: type K short 3.2 to 38; type L long 10 to 66 (P 0.45 to P 3.5)
Nut-end thread b2 0 ~ +2P tolerance: type K short 3.75 to 43; type L long 10.55 to 71
Reduced shank ds max/min per pitch: 1.9/1.7 (P 0.45), 3/2.8 (P 0.7), 7.7/7.5 (P 1.5), 16.2/16 (P 2.5), 24.2/24 (P 3.5)
Not tabulated Head form, length ladder, property class, finish — per RFQ
DIN 7964-1990 reduced shank bolts — thread pitches, thread lengths (type K short / type L long) and reduced shank d s by thread sizeMillimetres. The site prints an attribute-label table positionally paired with one 12-column numeric grid — merged column-wise, every value untouched. The P row is the thread pitch and doubles as the size ladder; b 1 / b 2 carry the source's "0 ~ +2P" tolerance with its type K (short thread) / type L (long thread) variants printed beside them; d s max/min is the reduced (unthreaded) shank diameter.
AttributeSub-label
PPPP0.450.50.70.811.251.51.7522.533.5
b 1b 10 ~ +2Ptype K / short threadtype K / short thread3.23.856.257.51012.51520253038
b 1b 10 ~ +2Ptype L / long threadtype L / long thread101214161822263038465466
b 2b 20 ~ +2Ptype K / short threadtype K / short thread3.754.567.558.511.214.317.52328.533.543
b 2b 20 ~ +2Ptype L / long threadtype L / long thread10.5512.71517.31923.227.832.54149.557.571
d sd smaxmax1.92.333.94.66.27.79.212.716.219.224.2
d sd sminmin1.72.12.83.74.467.5912.5161924
  • The label table prints its P row across four cells (P / P / P / P) and the other rows across four or five — source rows carry differing non-empty cell counts (4/5), grid padded empty.
  • The b 2 type-L row prints the variant label 'type L / long thread' while the b 1 type-L row prints 'type L / long thread' with the same wording — both carried verbatim.

Materials

  • Reduced-shank bolts order in the property class the joint design names — the shank-under-thread-diameter geometry is standard's contribution, the strength is the material's. Typical service is steel 8.8-class for machine and jig work where the shear plane must sit on the shank, with stainless variants quoted against the same geometry. State pitch (the table's key), K or L thread lengths on both ends if they differ, grip and head form on the RFQ; the 0 ~ +2P tolerance on b is the standard's, so thread length is accepted as produced within that band unless the drawing says otherwise

Ordering & documentation

Documents

Shipments of DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 7964 reduced shank bolts and screws with coarse thread is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 7964 reduced shank bolts and screws with coarse thread; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7964 reduced shank bolts and screws with coarse thread run 3–7 days. High-strength and custom parts for din 7964 reduced shank bolts and screws with coarse thread run 15–25 days. Quantities or variants of din 7964 reduced shank bolts and screws with coarse thread outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7964 reduced shank bolts and screws with coarse thread dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What are the type K and type L thread lengths, and which one does my drawing want?

Two distinct thread-length variants per end: type K is the short thread (b1 3.2 to 38 across the pitch ladder, b2 3.75 to 43) and type L is the long thread (b1 10 to 66, b2 10.55 to 71) — the collected table prints both with the same 0 ~ +2P tolerance. The choice is the joint's: K leaves a longer smooth shank for shear planes and location; L suits thin parts or tapped holes that need more engaged thread. If the drawing only says DIN 7964 without the variant, measure the threaded portion against the grip and send that measurement with the RFQ — quoting "M10 DIN 7964" alone does not tell us which of the four b values applies.

The table is keyed by thread pitch, not by M-size — how do I find my bolt?

Pitch is the more precise key, and it is how the standard itself is laid out: find your thread's coarse pitch in the P row (M5 → 0.8, M8 → 1.25, M10 → 1.5, M12 → 1.75, M16 → 2, M20 → 2.5, M24 → 3) and read that column straight down — b1/b2 in both K and L variants, then the reduced shank ds max/min. Because the geometry hangs off pitch, the same column serves any length or head the order states. Give us the full call-out — size, pitch, K/L, length under head, property class — and the shank diameter we ship is the ds pair from that column, turned just under the thread so the nuts run on freely.

What is the MOQ and lead time for DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread state?

State the full designation (DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 7964 Reduced Shank Bolts and Screws with Coarse Thread
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.