DIN 558 Hex Head Screws (Product Grades C, Long Series)

DIN 558 hexagon head screws, M5–M36 — fully threaded hex screws of product grade C for low-duty through-bolting, with the collected per-size tables: pitch, a, c, d a, d w, e, k, k 1, r and s.

Last updated: 2026-11

Request a Quote

DIN 558 Hex Head Screws (Product Grades C, Long Series) in an industrial setting
Illustrative image redrawn from real DIN 558 Hex Head Screws (Product Grades C, Long Series) product references — not a photograph of stocked items.

Specifications

DIN 558 is the grade-C workhorse hex screw: fully threaded, with the tolerances and head precision deliberately relaxed for joints that are clamped, not calibrated — fences, greenhouses, trailers, ducting, general fabrications. Where DIN 931/ISO 4014 carries a shank and tight tolerances for shear and fatigue duty, DIN 558 threads its whole length and accepts the wider head and thread tolerances of product grade C, which is exactly what low-cost volume hardware wants; the fully threaded body also means one screw serves several grip lengths, simplifying stock. The collected tables run M5 to M36: pitch, the thread run-out tolerance a, chamfer c, transition d a, bearing-face d w, across-corners e, head height k with grade tolerances, the bearing-check k 1, fillet r and across-flats s. The series stops at M36 — beyond that, or where a shear shank or grade-A/B precision matters, move to the ISO 4014/4017 family in this catalog. Property classes (grade C typically pairs with 4.6/5.8) and finishes stay per RFQ.

Standard DIN 558 — hexagon head screws, fully threaded, product grade C (through-bolting duty)
Series M5 – M36 (three source column groups: M5/M6/M8/M10, M12/M16/M20, M24/M30/M36)
Tabulated geometry Per size: pitch P, a (max, thread run-out), c (max), d a (max), d w (min), e (min, 8.63–60.79), k (nominal/min/max, 3.5–22.5), k 1 (min), r (min), s (max=nominal, min)
Grade / duty Product grade C — general through-bolting where head and thread tolerances are not load-critical; for fitted or shear-loaded joints use the shanked ISO 4014 / DIN 931 series
Property classes / finishes Not tabulated by the collected specification — per RFQ (grade C commonly pairs 4.6/5.8; confirm at quotation)
DIN 558 hex head screws - per-size dimensions (M5 - M10)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; a = thread run-out tolerance; c = chamfer height; d a = transition diameter; d w = bearing-face diameter; e = width across corners; k = head height; k 1 = head-bearing check height; r = fillet radius; s = width across flats, max = nominal size.
AttributeM5M6M8M10
P — Pitch0.811.251.5
a — max3.2456
c — max0.50.50.60.6
d a — max67.210.212.2
d w — min6.78.711.415.4
e — min8.6310.8914.218.72
k — Nominal Size3.545.36.4
min3.123.624.925.95
max3.884.385.686.85
k 1 — min2.22.53.454.2
r — min0.20.250.40.4
s — max=nominal size8101317
min7.649.6412.5716.57
  • Row 1 (P — Pitch): The source's first column-group header carries an empty size cell between 'Screw Thread' and 'M5' (a blank header cell as printed); size columns run M5-M10 as labeled.
DIN 558 hex head screws - per-size dimensions (M12 - M20)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; a = thread run-out tolerance; c = chamfer height; d a = transition diameter; d w = bearing-face diameter; e = width across corners; k = head height; k 1 = head-bearing check height; r = fillet radius; s = width across flats, max = nominal size.
AttributeM12M16M20
P — Pitch1.7522.5
a — max7810
c — max0.60.80.8
d a — max14.718.724.4
d w — min17.22227.7
e — min20.8826.1732.95
k — Nominal Size7.51012.5
min7.059.2511.6
max7.9510.7513.4
k 1 — min4.956.58.1
r — min0.60.60.8
s — max=nominal size192430
min18.4823.1629.16
  • Row 1 (P — Pitch): The source's first column-group header carries an empty size cell between 'Screw Thread' and 'M12' (a blank header cell as printed); size columns run M12-M20 as labeled.
DIN 558 hex head screws - per-size dimensions (M24 - M36)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; a = thread run-out tolerance; c = chamfer height; d a = transition diameter; d w = bearing-face diameter; e = width across corners; k = head height; k 1 = head-bearing check height; r = fillet radius; s = width across flats, max = nominal size.
AttributeM24M30M36
P — Pitch33.54
a — max121416
c — max0.80.80.8
d a — max28.435.442.4
d w — min33.242.751.1
e — min39.5550.8560.79
k — Nominal Size1518.722.5
min14.117.6521.45
max15.919.7523.55
k 1 — min9.912.415
r — min0.811
s — max=nominal size364655
min354553.8
  • Row 1 (P — Pitch): The source's first column-group header carries an empty size cell between 'Screw Thread' and 'M24' (a blank header cell as printed); size columns run M24-M36 as labeled.

Materials

  • Material, property class and finish specified per RFQ — low-duty outdoor work usually takes zinc plate or hot-dip galvanizing; confirm at quotation

Ordering & documentation

Documents

Shipments of DIN 558 Hex Head Screws (Product Grades C, Long Series) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 558 Hex Head Screws (Product Grades C, Long Series) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 558 Hex Head Screws (Product Grades C, Long Series)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 558 Hex Head Screws (Product Grades C, Long Series): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 558 hex head screws (product grades c, long series) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 558 hex head screws (product grades c, long series); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 558 hex head screws (product grades c, long series) run 3–7 days. High-strength and custom parts for din 558 hex head screws (product grades c, long series) run 15–25 days. Quantities or variants of din 558 hex head screws (product grades c, long series) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 558 Hex Head Screws (Product Grades C, Long Series) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 558 hex head screws (product grades c, long series) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 558 or DIN 931/ISO 4014 — when does the cheaper grade-C screw cost more?

When the joint cares about the hole. DIN 558 is fully threaded with grade-C tolerances: in a clearance hole that is fine — the screw just clamps. But put it where the plates are located by the bolt (a shear joint) and the thread now sits in the bearing plane: the saw-tooth thread crest bears instead of a ground shank, the hole works loose under vibration, and the joint that was "saved" by the cheaper screw pays for the rework. The second difference is tolerance discipline — grade-C heads and threads run wider, which is invisible on a fence and very visible in a fixture that expects ISO-grade fit. So the collected tables make sense for what they are: the e/k/s ladder of a utility hex screw from M5 to M36, fully threaded, cheap to make and buy. Use it for through-bolting timber, thin steel, ducting and hardware; step up to the ISO 4014/4017 family (same head dimensions where it matters) the moment the joint is located, fatigued or safety-relevant. Confirm property class and finish at RFQ — the collected specification does not tabulate them.

What is the MOQ and lead time for this bolt type?

The minimum order quantity for DIN 558 Hex Head Screws (Product Grades C, Long Series) is 1,000–10,000 pieces depending on size. Stock items of DIN 558 Hex Head Screws (Product Grades C, Long Series) ship in 3–7 days; high-strength and custom parts in 15–25 days. Common sizes of DIN 558 Hex Head Screws (Product Grades C, Long Series) are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 558 Hex Head Screws (Product Grades C, Long Series)?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 558 Hex Head Screws (Product Grades C, Long Series) state?

State the full designation (DIN 558), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 558 Hex Head Screws (Product Grades C, Long Series) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 558 Hex Head Screws (Product Grades C, Long Series)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.