DIN 976 Threaded Rod

Metric stud bolts and fully threaded rod to DIN 976-1 — 6g thread to ISO 965-2, product grade A to ISO 4759-1, property classes 4.8 to 12.9 (M3–M39), A2-70/A4-70 stainless to M24, lengths to 3,000 mm with js17 tolerance above 1 m, mandatory end marking from M5.

Last updated: 2026-11

Request a Quote

DIN 976 Threaded Rod in an industrial setting
Illustrative image redrawn from real DIN 976 Threaded Rod product references — not a photograph of stocked items.

Specifications

DIN 976-1 is the current German standard for metric stud bolts and full-thread rod — the document that absorbed DIN 975 and the one to cite on new drawings. Because a full-thread rod has no shank, the entire tensile path runs through the thread, so the standard pins down exactly the details that make a rod verifiable: external thread tolerance 6g to ISO 965-2, dimensional accuracy to product grade A of ISO 4759-1, property-class marking on one end of steel rods M5 and larger, and a defined length tolerance above 1,000 mm. DIN 976-2, often mislabeled online as the partially-threaded-rod standard, actually covers interference-fit (MFS) studs to DIN 8141-1 holes.

Standard DIN 976-1 (metric stud bolts and full-thread rod); DIN 976-2 covers interference-fit (MFS) studs to DIN 8141-1 holes
Thread Metric ISO profile, external tolerance class 6g to ISO 965-2
Dimensions and accuracy Product grade A to ISO 4759-1, stud ends to ISO 4753
Carbon steel classes 4.8, 5.6, 5.8, 8.8, 10.9, 12.9 (sizes M3–M39)
Stainless grades A2-70 / A4-70 for M3–M24; larger sizes by agreement
Nominal lengths Range to 1,000 / 2,000 / 3,000 mm; length tolerance above 1,000 mm js17 (product grade B)
End marking Mandatory on steel rods M5 and larger: property class symbol (class 4.8 excepted, colour code permitted); A2 / A4 on stainless
Designation example Stud bolt DIN 976-1-M10 x 1000-8.8 (1 m, class 8.8, M10)
Nut pairing Class-matched nut (6H); hot-dip galvanized assemblies need oversize-tapped nuts
Typical applications Supports, racking, solar rail, preloaded stud assemblies, general fixing

Materials

  • Carbon steel (classes 4.8–12.9)
  • A2 stainless steel (A2-70)
  • A4 stainless steel (A4-70)

Ordering & documentation

Documents

Shipments of DIN 976 Threaded Rod are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 976 Threaded Rod orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 976 Threaded Rod), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 976 Threaded Rod: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 976 threaded rod is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 976 threaded rod; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 976 threaded rod run 3–7 days. High-strength and custom parts for din 976 threaded rod run 15–25 days. Quantities or variants of din 976 threaded rod outside the standard range are confirmed at quotation.

Storage & shipping

DIN 976 Threaded Rod are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 976 threaded rod dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why does the property-class marking on threaded rod matter?

Because class 4.8 and class 8.8 rods look identical in a bin and behave nothing alike under torque. DIN 976-1 makes the marking mandatory for steel rods M5 and larger (class 4.8 excepted, with a permitted colour code in its place, and A2/A4 markings on stainless). Rod that arrives under the old DIN 975 label frequently carries no marking at all, which makes the grade unverifiable from the part itself — one of the concrete reasons new specifications moved to DIN 976-1.

Is DIN 976-2 the standard for partially threaded rod?

No — this is a persistent procurement myth. DIN 976-2 covers metric interference-fit thread (MFS) stud bolts, the short studs installed into holes produced to DIN 8141-1 for mould and tool retention. Fully threaded rod is DIN 976-1; if a drawing genuinely needs a partially threaded stud, that is a different product callout and should be quoted as such.

What is the MOQ and lead time for DIN 976 Threaded Rod?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 976 Threaded Rod state?

State the full designation (DIN 976), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 976 Threaded Rod inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 976 Threaded Rod
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.