ASTM A449 Bolts

Quenched-and-tempered medium carbon steel hex bolts per ASTM A449, Type 1 or Type 3 — 120,000 psi minimum tensile up to 1 inch, stepping down through 1-1/2″ to 90,000 psi at 3″. The large-diameter general-purpose grade where the structural A325 line ends.

Last updated: 2026-11

Request a Quote

ASTM A449 Bolts in an industrial setting
Illustrative image redrawn from real ASTM A449 Bolts product references — not a photograph of stocked items.

Specifications

A449 is the strength class general construction and utility work reaches for when bolt diameters grow past the structural standard's range. Through 1 inch it carries the same minimums the grade chart tabulates for F3125 Grade A325 — 85 ksi proof / 120 ksi tensile — but from 1-1/8″ to 1-1/2″ the two diverge: the F3125 consolidation raised A325 to 85/120 at every size, while A449 keeps its own size table, stepping down to 74/105 in that band and running on to 3 inches at 55 ksi proof / 90 ksi tensile. It is supplied as Type 1 or Type 3. Joints designed under structural steel codes stay on A325, while pole-line, equipment and general fabrication work above 1-1/2″ diameter is where A449 is the grade that actually exists. As with every quenched-and-tempered grade, the minimums are size-dependent, so an RFQ should state diameter explicitly rather than quoting one strength number.

Standard ASTM A449, Type 1 or Type 3 — hex bolt
Material Medium carbon steel, quenched and tempered
Proof load, min 85 ksi (up to 1″); 74 ksi (1-1/8″–1-1/2″); 55 ksi (1-5/8″–3″)
Tensile strength, min 120 ksi (up to 1″); 105 ksi (1-1/8″–1-1/2″); 90 ksi (1-5/8″–3″)
Hardness Rockwell C25–C34 (up to 1″); C19–C30 (1-1/8″–1-1/2″); B91–B100 (1-5/8″–3″)
Size coverage Strength tiers tabulated to 3 in diameter — past the 1-1/2 in limit of the F3125 A325 line. The lower bound of the top tier is printed differently across references: the grade-strength table carries the third band as 1-3/4 in–3 in (explicitly A449-labeled), while the chart tabulated here prints 1-5/8 in–3 in. The third-tier minimums (55 ksi proof / 90 ksi tensile) are consistent across both printings; the size figures above follow the chart tiering, and no attempt is made to pick one boundary as authoritative.
Typical applications General construction, utility and equipment bolting above 1-1/2″ diameter; structural-code joints stay on A325
Collected specification records
Grade Field Recorded value
ASTM A449 Type 1 or 3 Nominal size range 1/4 in to 1 in; over 1 in to 1-1/2 in; over 1-1/2 in to 3 in
ASTM A449 Type 1 or 3 Strength grade ASTM A449 (1/4 in to 1 in band) — proof load min 85 ksi; tensile min 120 ksi; yield min 92 ksi
ASTM A449 Type 1 or 3 Strength grade ASTM A449 (1-1/8 in to 1-1/2 in band) — proof load min 74 ksi; tensile min 105 ksi; yield min 81 ksi
ASTM A449 Type 1 or 3 Strength grade ASTM A449 (1-3/4 in to 3 in band) — proof load min 55 ksi; tensile min 90 ksi; yield min 58 ksi

Industry reference — figures as printed in the collected technical tables; availability confirmed per quotation.

Materials

  • Medium carbon steel, quenched and tempered

A449 is quenched-and-tempered medium carbon steel for general use, available in Type 1 or Type 3.

Strength steps down with diameter — 120/105/90 ksi tensile and 85/74/55 ksi proof across three size ranges — so a large A449 is not the same part as a small one: check the size-dependent values on the certificate. SAE drawings frequently arrive here through the Grade 5 ≈ A449 equivalence, which holds up to 1 in diameter.

Ordering & documentation

Documents

Shipments of ASTM A449 Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASTM A449 Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASTM A449 Bolts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASTM A449 Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for astm a449 bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for astm a449 bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for astm a449 bolts run 3–7 days. High-strength and custom parts for astm a449 bolts run 15–25 days. Quantities or variants of astm a449 bolts outside the standard range are confirmed at quotation.

Storage & shipping

ASTM A449 Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store astm a449 bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How does A449 relate to F3125 Grade A325?

Through 1 inch the strength minimums are the same line — 85 ksi proof / 120 ksi tensile, both quenched-and-tempered medium carbon steel. From 1-1/8″ to 1-1/2″ they diverge: F3125 holds Grade A325 at 85/120 across the full size range (the consolidation raised the former 74/105 over-1-inch requirements), while A449 keeps its own descending table at 74/105 in that band. The other difference is where each stops — the A325 heavy hex structural bolt is tabulated only through 1-1/2″ diameter, while A449 tiers run to 3″ at 55 ksi proof / 90 ksi tensile. Practically: if the joint is designed under a structural steel code, it calls A325; if the bolt diameter or the application is outside that frame — utility structures, equipment, general fabrication — A449 is the grade that covers it, with the large-diameter strength steps verified against the A449 table.

What is the MOQ and lead time for this bolt grade?

The minimum order quantity for ASTM A449 bolts is 1,000–10,000 pieces depending on size. Stock items of ASTM A449 ship in 3–7 days; high-strength and custom parts in 15–25 days. Common diameters of this large-diameter grade are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this bolt grade state?

State the standard and grade (ASTM A449 with the type if the drawing names one), diameter and length, thread type (UNC/UNF or metric), finish (plain, zinc, or hot-dip galvanized where specified), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country. Because A449 minimums differ by size tier, always pair the grade with the diameter in the RFQ.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASTM A449 Bolts inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your ASTM A449 Bolts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.