ISO Class 8.8 Bolts

Property Class 8.8 bolts per ISO 898-1 — medium carbon steel, quenched and tempered, 800 MPa minimum tensile (830 MPa above M16), 640 MPa yield, 22–32 HRC. The general-purpose high-tensile metric grade.

Last updated: 2026-11

Request a Quote

ISO Class 8.8 Bolts in an industrial setting
Illustrative image redrawn from real ISO Class 8.8 Bolts product references — not a photograph of stocked items.

Specifications

Class 8.8 is the workhorse metric high-tensile grade: the default for machine construction, steel framing, automotive components and general engineering where a marked, testable strength class is required. The designation encodes the strength — 8 × 100 MPa tensile, with the .8 meaning yield at 80% of tensile. It is quenched and tempered medium carbon steel. ISO 898-1:2013 covers coarse-pitch metric threads M1.6–M39 and fine-pitch threads M8×1–M39×3; this is the standard's scope, not a promise that every class/size combination is available. Routine supply is concentrated below 36 mm diameter, with larger sections confirmed at quotation. Select the finish against the specified coating system, dimensional fit and service conditions.

Standard ISO 898-1, property Class 8.8 (hex bolts per ISO 4014/4017)
Material Medium carbon steel, quenched and tempered
Tensile strength, min 800 MPa (≤ M16); 830 MPa (> M16) — 116,000 psi
Yield strength (min) / proof load 640 MPa yield (≤ M16); 660 MPa (> M16); proof load 580 MPa
Hardness 22–32 HRC
Size range ISO 898-1:2013 scope: coarse-pitch M1.6–M39 and fine-pitch M8×1–M39×3; actual Class 8.8 size combinations are governed by the applicable property-class table. Routine supply to 36 mm diameter × 300 mm length; larger sizes confirmed at quotation
Typical applications Machine construction, structural connections, automotive components, general engineering
Finishes Plain, zinc plate, hot-dip galvanized — all compatible

Where this grade fits

Class 8.8 sits below the ~1000 MPa threshold where hydrogen embrittlement becomes a design constraint, so it keeps the full coating freedom — plain, zinc plate and hot-dip galvanizing are all routine choices. If the joint calculation is comfortably within its 800 MPa capability, this is the more forgiving grade: less notch-sensitive in fatigue and undemanding on coating practice.

Materials

  • Medium carbon steel (quenched and tempered)

ISO 898-1 gives Class 8.8 two permitted material routes: plain carbon steel quenched and tempered (carbon 0.25-0.55%), or carbon steel with additives such as boron, manganese or chromium (carbon from 0.15%), both tempered at 425 °C minimum.

The class fixes mechanical properties, not the exact analysis — two 8.8 bolts from different mills can differ in weldability and coating response, so ask for the mill test report where heat behavior matters to your process.

Ordering & documentation

Documents

Shipments of ISO Class 8.8 Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO Class 8.8 Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO Class 8.8 Bolts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ISO Class 8.8 Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for iso class 8.8 bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for iso class 8.8 bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso class 8.8 bolts run 3–7 days. High-strength and custom parts for iso class 8.8 bolts run 15–25 days. Quantities or variants of iso class 8.8 bolts outside the standard range are confirmed at quotation.

Storage & shipping

ISO Class 8.8 Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso class 8.8 bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Is Class 8.8 equivalent to SAE Grade 5 or Grade 8?

Neither exactly. Class 8.8 (800 MPa minimum tensile ≈ 116,000 psi) sits between SAE Grade 5 (120,000 psi) and Grade 8 (150,000 psi); the common "8.8 ≈ Grade 5" shorthand is approximate because the test methods and proof-load definitions differ. Never substitute one for the other on a drawing that names a specific standard — order the class the specification calls out.

What is the MOQ and lead time for this bolt grade?

The minimum order quantity for ISO Class 8.8 Bolts is 1,000–10,000 pieces depending on size. Stock items of ISO Class 8.8 Bolts ship in 3–7 days; high-strength and custom parts in 15–25 days. Common diameters of ISO Class 8.8 Bolts are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this bolt grade state?

For ISO Class 8.8 Bolts, state the standard and grade (for example ISO 4017 Class 8.8 or ASTM F3125 Grade A325 Type 1), diameter and length, thread type (metric coarse or UNC/UNF), finish (plain, zinc, or hot-dip galvanized where the grade permits), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO Class 8.8 Bolts inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your ISO Class 8.8 Bolts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.