DIN 261 Tee-Head Bolts

DIN 261 tee-head bolts, M8 to M100: thread pitches, thread-length bands b for l≤120 / l>120≤200 / l>200, tee-head geometry (k, n, m, t, db) and the approximate mass ladder per 1000 pieces.

Last updated: 2026-11

Request a Quote

DIN 261 Tee-Head Bolts in an industrial setting
Illustrative image redrawn from real DIN 261 Tee-Head Bolts product references — not a photograph of stocked items.

Specifications

DIN 261 is the big tee-head bolt that drops into a T-slot or clamping rail and turns to lock — the collected 10/2010-edition table runs from M8 (k 5.5, head m 18) through the heavy sizes the ordinary hex program stops at: M56 (k 35, m 102), M72×6, M80×6, M90×6 up to M100×6 (k 62, m 170). Thread length b prints in the three grip bands (l≤120, l>120≤200, l>200 — at M24: 54/60/-, at M42: 90/96/109), and the threaded-shank column db switches in from M36 up, where the source pairs the big tee-heads with a smaller threaded end (M 12 / M 16 / M 20) instead of threading the full shank. Note the source prints the top sizes as M 72 X 6 through M 100 X 6 — these are fine-pitch 6 mm threads on the very large nominals, carried verbatim in the grid. The mass table prices the long clamping bolts from 30 to 200 mm (M36×200 ≈ 1950 kg/1000 pcs); the empty cells in it are the source's own staircase of non-tabulated length/size combinations, not gaps in the transcription. Fixture, press-table and heavy-clamping builders order these by slot width and grip the same way as DIN 787 T-slot bolts — the tee head is the fit, the thread is the clamping force.

Standard / scope DIN 261 tee-head bolts — M8 to M100 (M72 and above as ×6 fine pitch), edition 10/2010 (supersedes 01/1987)
Thread P Coarse pitch 1.25 (M8) to 6 (M30); the M72×6 / M80×6 / M90×6 / M100×6 sizes print pitch 6
Thread length b Three grip bands per size: l≤120 / l>120≤200 / l>200 — M16 38/44/-, M24 54/60/-, M42 90/96/109, M100×6 -/-/225
Head geometry k nom 5.5 (M8) to 62 (M100×6); slot width n nom 8 to 100; head m nom 18 to 170; t min from M36 (22 to 33); db threaded shank M12/M16/M20 on the M36+ sizes
Mass Approximate mass per 1000 pcs (ρ=7,85 kg/dm³) tabulated per size/length, l 30 to 200: M8×30 = 18 kg up to M36×200 = 1950 kg
Not tabulated Strength classes (the designation examples print 5.6 and 4.6), finish, T-slot tolerance pairing — per RFQ
DIN 261 tee-head bolts — thread, thread-length bands and tee-head geometry by size (table 1 of 2)Millimetres. b (thread length) prints in three grip bands (l≤120, l>120≤200, l>200); db is the threaded-shank column the source fills only from M36 up (M 12 / M 16 / M 20 designations); '-' is the source's not-applicable mark. The site prints its caption and publication-date rows spanning the full grid width while the data rows carry ten cells — the trailing columns stay empty, verbatim.
Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261Dimensions in mm - source DIN 261
Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987Publication date: 10/2010 - Supersedes DIN 261: 01/1987
d thread sizePb (l<=120)b (l>120<=200)b (l>200)k nomn nomm nomt mindb
M 81.2522--5.5818--
M 101.526--71021--
M 121.7530--81226--
M 1623844-10.51630--
M 202.54652-132036--
M 2435460-152443--
M 303.56672-193054--
M 3647884-23366622M 12
M 424.5909610926428022M 12
M 485-10812130488822M 12
M 565.5-124137355610226M 16
M 646-130143406411526M 16
M 72 X 66--169457212826M 16
M 80 X 66--185508014033M 20
M 90 X 66--205559015533M 20
M 100 X 66--2256210017033M 20
Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6Designation example: T-head bolt DIN 261 M16 x 140 - 5.6 Designation example: T-head bolt DIN 261 M72 x 400 x M16 - 4.6
  • The caption and designation-example rows span 17 grid columns while the header and size rows carry 10 cells — source rows carry differing non-empty cell counts (17/10), grid padded empty.
  • The designation-example footer prints both call-outs in one cell: 'T-head bolt DIN 261 M16 x 140 - 5.6' and 'T-head bolt DIN 261 M72 x 400 x M16 - 4.6' — carried verbatim.
DIN 261 tee-head bolts — approximate mass per 1000 pieces, commercial sizes (table 2 of 2)Millimetres; mass in kg ×1000 pcs at ρ = 7,85 kg/dm³. Empty cells are length/size combinations the source does not tabulate; lengths run 30 to 200, sizes M8 to M36.
Din 261 2010 - Approximate mass, in kg x1000 pcs, ( =7,85 kg/dm 3 ) - commercial sizesDin 261 2010 - Approximate mass, in kg x1000 pcs, ( =7,85 kg/dm 3 ) - commercial sizesDin 261 2010 - Approximate mass, in kg x1000 pcs, ( =7,85 kg/dm 3 ) - commercial sizesDin 261 2010 - Approximate mass, in kg x1000 pcs, ( =7,85 kg/dm 3 ) - commercial sizesDin 261 2010 - Approximate mass, in kg x1000 pcs, ( =7,85 kg/dm 3 ) - commercial sizesDin 261 2010 - Approximate mass, in kg x1000 pcs, ( =7,85 kg/dm 3 ) - commercial sizesDin 261 2010 - Approximate mass, in kg x1000 pcs, ( =7,85 kg/dm 3 ) - commercial sizesDin 261 2010 - Approximate mass, in kg x1000 pcs, ( =7,85 kg/dm 3 ) - commercial sizesDin 261 2010 - Approximate mass, in kg x1000 pcs, ( =7,85 kg/dm 3 ) - commercial sizes
d thread sizeM8M10M12M16M20M24M30M36
nominal length l
301828.2
3519.531.3
402034.4
452237.556.5113
5023.940.660.9121
5525.943.765.4129
6027.946.869.8137211
6529.849.974.3145223
7031.85378.7153236335
7533.856.183.1161248373
8037.759.287.6176260390
9065.496.5192285426
10071.6105208310461812
110114224334497868
1201232393595329231310
1302553845689781390
14027140860310301470
15028743363910901550
16045867411401630
17048371012001710
18050774512601790
19053278113101870
20055781613701950
  • The source mass grid carries staircase-shaped availability: at short lengths only the small sizes print values (M8/M10 at l=30), and the top sizes start printing only from l=45 (M16/M20) or l=120 (M36) — empty cells are that staircase, not transcription gaps.

Materials

  • Tee-head bolts are typically medium-carbon steel in moderate property classes — the source designation examples print 5.6 and 4.6, not the 8.8+ of high-strength bolting, because the duty is location and clamping in machined slots rather than structural preload. State thread size × length, the T-slot width the head must seat (n nom is the sizing dimension), grip and thread-length band, property class and finish on the RFQ; large sizes (M48 and up, ×6 pitch) are often quoted against drawing because stock depth thins out at the top of the ladder

Ordering & documentation

Documents

Shipments of DIN 261 Tee-Head Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 261 Tee-Head Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 261 Tee-Head Bolts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 261 Tee-Head Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 261 tee-head bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 261 tee-head bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 261 tee-head bolts run 3–7 days. High-strength and custom parts for din 261 tee-head bolts run 15–25 days. Quantities or variants of din 261 tee-head bolts outside the standard range are confirmed at quotation.

Storage & shipping

DIN 261 Tee-Head Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 261 tee-head bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How does DIN 261 differ from the DIN 186/188 T-head bolts?

Scale and head proportions. DIN 186/188 cover the smaller T-head bolts used with standard machine-table slots, while DIN 261 is the heavy program — the collected table starts at M8 but climbs through M56 to M100×6 with proportionally deep heads (m nom 170 at M100×6) and, from M36 up, a reduced threaded shank db so the big head pairs with a manageable thread end. If your slot takes a small bolt and the drawing says DIN 186/188, stay there; DIN 261 is the call-out for press tables, heavy fixture rails and clamping systems where the slot and head are sized together. Order by the exact standard number on the drawing — the head dims are not interchangeable between the three.

Why do the biggest sizes print as M 72 X 6, M 80 X 6 and so on, and which thread do I get?

Because above M64 the standard moves to a 6 mm pitch instead of the coarse thread — M72 coarse would be impractically deep and hard to cut, so the top of the ladder is fine-pitch ×6, and the source prints the full designation (M 72 X 6 through M 100 X 6) rather than hiding the pitch in a column. The practical effect on ordering: a nut for an M72×6 tee-head bolt is a fine-pitch nut, not the coarse M72 you may have in the crib. Write the designation exactly as printed — "tee-head bolt DIN 261 M72 x 400 x M16 - 4.6" in the source's own example carries both the ×6 main thread and the M16 reduced end — and we confirm thread form on the order acknowledgement.

What is the MOQ and lead time for DIN 261 Tee-Head Bolts?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 261 Tee-Head Bolts state?

State the full designation (DIN 261 Tee-Head Bolts), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 261 Tee-Head Bolts inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 261 Tee-Head Bolts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.