GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread
GB/T 5786-2016 fully threaded hexagon head bolts with metric fine pitch thread: per-size fine pitches, thread runout, bearing face, across-flats and corners, head height and fillet ladders across the fine-thread size range.
Last updated: 2026-11
Specifications
Fine-pitch full-thread hex bolts are the adjustable-position variant of the hex bolt: same head architecture as GB/T 5783, but with the finer thread pitches that give finer axial setting and better vibration behaviour at high preload. The collected GB/T 5786-2016 table carries the fine-pitch assignment per size — 24 size columns from the small end to (M64), each with its fine pitch (the P row prints 1.0 at M8 x1 through 4.0 at M64 x4) — plus the runout a, bearing dw/da, across-corners e max/min (grade-split rows where printed), head height k max/min, fillet r and across-flats s with its tolerance ladder. The two salvaged 12-column header segments (small and large size ranges) are stitched into one 24-size row set exactly as the collected page segments them. Where a coarse-thread identity covers the same nominal size, this fine-pitch ladder is the one a "×1.5"-style callout orders against.
| Standard / scope | GB/T 5786-2016 hexagon head bolts with fine pitch thread, full thread — 24 sizes M8 x1 to M64 x4 in two segments, non-preferred sizes parenthesized as printed |
|---|---|
| Fine pitch P | M8 x1, M10 x1, (M10) x1.25, M12 x1.5, (M12) x1.25, (M14) x1.5, M16 x1.5 ... M36 x3 ... M56 x4, M64 x4 — the size x pitch header cells are the fine-pitch assignment itself |
| Width across flats s | 13 (M8 x1) to 95 (M64 x4) nominal; min ladder 12.57 to 92.8 — max/min rows carried as printed |
| Width across corners e | Grade A min 14.38 (M8 x1) to 104.86 (M64 x4); Grade B from M10 (17.59) — grade-split rows as printed |
| Head height k / k1 / fillet r | k max 5.3 (M8) to 40 (M64) with max/min grade rows; k1 grade A 3.61 (M8) to 27.65 (M64); r 0.4 to 2 |
| Not tabulated | Lengths, property classes, finishes — per RFQ against the fine-pitch property-class standards |
| Attribute | Sub-label | Note | M8 x1 | M10 x1 | (M10) x1.25 | M12 x1.5 | (M12) x1.25 | (M14) x1.5 | M16 x1.5 | (M18) x1.5 | M20 x1.5 | (M20) x2 | (M22) x1.5 | M24 x2 | (M27) x2 | M30 x2 | (M33) x2 | M36 x3 | (M39) x3 | M42 x3 | (M45) x3 | M48 x3 | (M52) x4 | M56 x4 | (M60) x4 | M64 x4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 1 | 1 | 1.25 | 1.5 | 1.25 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 1.5 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | |
| a | a | 3 | 3 | 4 | 4.5 | 4 | 4.5 | 4.5 | 4.5 | 4.5 | 6 | 4.5 | 6 | 6 | 6 | 6 | 9 | 9 | 9 | 9 | 9 | 12 | 12 | 12 | 12 | |
| a | a | 1 | 1 | 1.25 | 1.5 | 1.25 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 1.5 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | |
| c | c | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | |
| c | c | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | |
| d a | d a | 9.2 | 11.2 | 11.2 | 13.7 | 13.7 | 15.7 | 17.7 | 20.2 | 22.4 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 45.6 | 48.6 | 52.6 | 56.6 | 63 | 67 | 71 | |
| d w | d w | Grade A | 11.63 | 14.63 | 14.63 | 16.63 | 16.63 | 19.64 | 22.49 | 25.34 | 28.19 | 28.19 | 31.71 | 33.61 | / | / | / | / | / | / | / | / | / | / | / | / |
| d w | d w | 11.47 | 14.47 | 14.47 | 16.47 | 16.47 | 19.15 | 22 | 24.85 | 27.7 | 27.7 | 31.35 | 33.25 | 38 | 42.75 | 46.55 | 51.11 | 55.88 | 59.95 | 64.7 | 69.45 | 74.2 | 78.66 | 83.41 | 88.16 | |
| e | e | Grade A | 14.38 | 17.77 | 17.77 | 20.03 | 20.03 | 23.36 | 26.75 | 30.14 | 33.53 | 33.53 | 37.72 | 39.98 | / | / | / | / | / | / | / | / | / | / | / | / |
| e | e | 14.20 | 17.59 | 17.59 | 19.85 | 19.85 | 22.78 | 26.17 | 29.56 | 32.95 | 32.95 | 37.29 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | 88.25 | 93.56 | 99.21 | 104.86 | |
| k | k | 5.3 | 6.4 | 6.4 | 7.5 | 7.5 | 8.8 | 10 | 11.5 | 12.5 | 12.5 | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | 28 | 30 | 33 | 35 | 38 | 40 | |
| k | k | 5.45 | 6.58 | 6.58 | 7.68 | 7.68 | 8.98 | 10.18 | 11.715 | 12.715 | 12.715 | 14.215 | 15.215 | / | / | / | / | / | / | / | / | / | / | / | / | |
| k | k | 5.15 | 6.22 | 6.22 | 7.32 | 7.32 | 8.62 | 9.82 | 11.285 | 12.285 | 12.285 | 13.785 | 14.785 | / | / | / | / | / | / | / | / | / | / | / | / | |
| k | k | 5.54 | 6.69 | 6.69 | 7.79 | 7.79 | 9.09 | 10.29 | 11.85 | 12.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.15 | 21.42 | 22.92 | 25.42 | 26.42 | 28.42 | 30.42 | 33.50 | 35.50 | 38.50 | 40.50 | |
| k | k | 5.06 | 6.11 | 6.11 | 7.21 | 7.21 | 8.51 | 9.71 | 11.15 | 12.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | 27.58 | 29.58 | 32.50 | 34.50 | 37.50 | 39.50 | |
| k 1 | k 1 | Grade A | 3.61 | 4.35 | 4.35 | 5.12 | 5.12 | 6.03 | 6.87 | 7.9 | 8.6 | 8.6 | 9.65 | 10.35 | / | / | / | / | / | / | / | / | / | / | / | / |
| k 1 | k 1 | 3.54 | 4.28 | 4.28 | 5.05 | 5.05 | 5.96 | 6.8 | 7.81 | 8.51 | 8.51 | 9.56 | 10.26 | 11.66 | 12.8 | 14.41 | 15.46 | 17.21 | 17.91 | 19.31 | 20.71 | 22.75 | 24.15 | 26.25 | 27.65 | |
| r | r | 0.4 | 0.4 | 0.4 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 | |
| s | s | 13 | 16 | 16 | 18 | 18 | 21 | 24 | 27 | 30 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | |
| s | s | 12.73 | 15.73 | 15.73 | 17.73 | 17.73 | 20.67 | 23.67 | 26.67 | 29.67 | 29.67 | 33.38 | 35.38 | / | / | / | / | / | / | / | / | / | / | / | / | |
| s | s | 12.57 | 15.57 | 15.57 | 17.57 | 17.57 | 20.16 | 23.16 | 26.16 | 29.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | 78.1 | 82.8 | 87.8 | 92.8 |
- The large-size segment prints '/' (not ' - ') on its grade-B min/max sub-rows and the d w min sub-row — the source's own not-tabulated marker there, carried verbatim.
Materials
- Fine-pitch hex bolts are usually the fastener of choice where preload accuracy and vibration resistance matter — clamping fixtures, pressed housings, hydraulic ends. Supply is commonly 8.8/10.9 alloy with zinc or black finish; fine pitch reduces the thread's self-loosening tendency but raises the consequences of cross-threading at assembly, so specify thread pitch explicitly (M12×1.5, not "M12 fine") on the RFQ and gauge-check mating parts
Ordering & documentation
Documents
Shipments of GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for gb/t 5786-2016 hexagon head bolts with fine pitch thread, full thread is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for gb/t 5786-2016 hexagon head bolts with fine pitch thread, full thread; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for gb/t 5786-2016 hexagon head bolts with fine pitch thread, full thread run 3–7 days. High-strength and custom parts for gb/t 5786-2016 hexagon head bolts with fine pitch thread, full thread run 15–25 days. Quantities or variants of gb/t 5786-2016 hexagon head bolts with fine pitch thread, full thread outside the standard range are confirmed at quotation.
Storage & shipping
GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store gb/t 5786-2016 hexagon head bolts with fine pitch thread, full thread dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When should a fine-pitch full-thread bolt be chosen over the coarse-thread equivalent?
Three practical triggers: fine axial adjustment (a 1.5 mm pitch moves the nut a third of what a coarse M12 thread does per turn), higher preload per torque unit (the smaller thread helix angle converts torque to tension more efficiently), and vibration service, where the shallow helix resists back-off. The costs are assembly care and damage sensitivity — fine threads gall and cross-thread more easily, and the bolt's ductile margin at the root is lower. If the application ticks one of the three triggers, the GB/T 5786 identity is the right ladder; otherwise the coarse GB 5783 / ISO 4017 family is cheaper to assemble and more forgiving.
How do I read the two size segments in the table?
The collected page prints its size ladder in two salvaged header segments — the small range and the large range (with the non-preferred sizes parenthesized) — because of how the source lays out its grids; the generator stitches them column-wise into one row set without touching values. Read any size column straight down for that bolt's pitch, runout, bearing face, corners, head height and flats. If a size you need prints parenthesized, it is a non-preferred step: manufacturable but usually slower and pricier — quote it explicitly and expect the schedule to reflect it.
What is the MOQ and lead time for GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread state?
State the full designation (GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your GB/T 5786-2016 Hexagon Head Bolts with Fine Pitch Thread, Full Thread
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support