DIN 7969 Slotted Countersunk Head Bolts (M10 – M24)

DIN 7969 slotted countersunk head bolts for structural steel bolting — head and bearing dimensions b1/b2/dk/k/t for M10 to M24 with the full length-availability ladder l 20 to 160 mm, for steel-structure joints driven by a slotted countersunk head.

Last updated: 2026-11

Request a Quote

DIN 7969 Slotted Countersunk Head Bolts (M10 – M24) in an industrial setting
Illustrative image redrawn from real DIN 7969 Slotted Countersunk Head Bolts (M10 – M24) product references — not a photograph of stocked items.

Specifications

DIN 7969 is the slotted-head member of the steel-structure bolt trio: a countersunk head with a single drive slot, seated flush in a countersink so the head does not proud the faying surface — the classic choice where a projecting hex head would foul traffic, mating parts or clearances on steelwork. This reference transcribes the source grid verbatim in two blocks: the per-thread head/shank attributes (b1 and b2 bearing and head-fit widths, head diameter dk, head height k, slot depth t) for the six tabulated threads M10, M12, M16, M20, M22 and M24, and the full length-availability matrix (l 20 to 160 mm) where the source marks every produced length/thread pair with a bare "+". Reading the matrix matters for RFQ discipline: not every length exists in every thread — for example l 30 is printed for M10/M12/M16 only, and M24 starts at l 45 — so a drawing length outside the "+" cells is a quotation item, not a catalogue pick. The source page tabulates dimensions and availability only: materials, property classes and finishes are not printed and are not claimed here — confirm them on the RFQ.

Standard / scope DIN 7969 slotted countersunk head bolts for structural steel bolting (source title as printed); table header prints "Dimensions of countersunk head screws DIN 7969 MU" — the "MU" suffix is the source's own and unexplained
Threads six tabulated sizes: M10, M12, M16, M20, M22, M24 (the availability matrix and the attribute grid share these columns per the captured DOM order)
Head/shank attributes b1 20 to 38, b2 25 to 50, dk 17 to 38, k 5,5 to 13, slot depth t 3 to 6 (mm, M10 to M24)
Length ladder (l) 20 to 160 mm in the source's steps (20-80 by 5, then 90-160 by 10); availability per thread marked with the source's bare "+" (M10 to l 100; M24 from l 45)
Not tabulated No materials, property classes (e.g. 4.6/8.8), finishes, shear/tension values or equivalents printed on the source page — per RFQ against the standard document
Head and shank attributes to DIN 7969 (source table header: "Dimensions of countersunk head screws DIN 7969 MU")dimensions in mm
AttributeM10M12M16M20M22M24
b1202228323538
b2252835404550
dk172128323538
k5,57911,51213
t344456
  • the source grid prints no thread header above the attribute block; the attribute columns are read against the same M10-M24 columns as the availability matrix below (captured DOM order preserved).
  • the table title's "MU" suffix (sic) is the source's own printing; no legend on the collected page explains it — carried verbatim, not adjudicated.
Length availability matrix to DIN 7969 (bare "+" = printed in the source grid; blank = not tabulated)lengths l in mm; the source prints no legend for the "+" marks
lM10M12M16M20M22M24
20+
25+
30+++
35+++++
40+++++
45++++++
50++++++
55++++++
60++++++
65++++++
70++++++
75++++++
80++++++
90++++++
100++++++
110+++++
120+++++
130+++++
140+++++
150+++++
160+++++
  • Row 3 (30): l 30 is printed for M10/M12/M16 only (M20/M22 join at l 35, M24 at l 45) — availability boundaries carried verbatim from the "+" cells.
  • the "+" marks are the source's only availability indicator — no legend, no stock/special-order distinction is printed; blank cells are read as "not tabulated", not as a supply promise either way.

Materials

  • The source page prints no materials or property-class line, so this page makes no material claim: DIN 7969 is used with the steel-structure grade your design calls out, and the grade/finish belong on the RFQ alongside the length picked from the "+" cells. When you specify, state thread, length (checked against the availability matrix — M24 begins at l 45 and M10 ends at l 100), the property class the joint design requires, and the finish; the quote is then matched against a certificate instead of an assumed catalogue default.

Ordering & documentation

Documents

Shipments of DIN 7969 Slotted Countersunk Head Bolts (M10 – M24) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7969 Slotted Countersunk Head Bolts (M10 – M24) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7969 Slotted Countersunk Head Bolts (M10 – M24)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 7969 Slotted Countersunk Head Bolts (M10 – M24): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 7969 slotted countersunk head bolts (m10 – m24) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 7969 slotted countersunk head bolts (m10 – m24); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7969 slotted countersunk head bolts (m10 – m24) run 3–7 days. High-strength and custom parts for din 7969 slotted countersunk head bolts (m10 – m24) run 15–25 days. Quantities or variants of din 7969 slotted countersunk head bolts (m10 – m24) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7969 Slotted Countersunk Head Bolts (M10 – M24) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7969 slotted countersunk head bolts (m10 – m24) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Which lengths actually exist for each thread — and what happens if my drawing needs one that is not marked?

The source answers this with a bare "+" matrix: l 20-100 is printed for M10 (from l 30 also M12/M16; M20/M22 join at l 35), l 45-160 for M24, and the middle threads run most of the ladder — the full grid is on this page verbatim. Two boundaries matter in practice: M24 has no lengths below 45 tabulated, and M10 stops at 100. A length outside the "+" cells is not a stock claim or a special-order promise — the source simply does not print it, so it is confirmed at quotation against the standard document (a shorter M24 may be achievable by threading a longer blank, but that is a manufacturing decision to be quoted, not assumed from this table).

The table header says "DIN 7969 MU" — what does MU mean?

It is printed that way in the source and this page carries it verbatim without adjudicating it: no legend on the collected page explains the suffix, and this reference does not guess. The dimension rows themselves (b1, b2, dk, k, t and the availability matrix) are complete and self-consistent for M10-M24, so the engineering content is usable; if your drawing or purchase order needs the suffix resolved (thread style, production variant or a source-labelling artifact), verify it against the standard document or state it explicitly on the RFQ so supply matches the intended variant.

DIN 7969 or DIN 7990 — which countersunk steel-structure bolt does my joint need?

The drive and the head fit decide it. DIN 7969 (this page) is slot-driven: a single screwdriver-style slot in a countersunk head — chosen where the head must sit flush and torque values are modest, with the availability ladder confirming which length/thread pairs are tabulated. DIN 7990 is the hexagon countersunk bolt for high-strength steel structures — driven by wrench/socket with the hexagon sinking into the countersink, for the heavier structural joints. They are not interchangeable: the slot limits the torque you can apply without cam-out, and the countersink angles/head geometries differ. Check the b1/b2/dk/k rows here against your countersink drawing; if the joint is governed by a structural code, the code's own fastener list decides, and both standards are quoted per RFQ.

What should an RFQ for DIN 7969 bolts state?

Thread and length as a pair checked against the "+" matrix (e.g. M16 x 65 exists; M24 x 30 does not), the property class and finish your design requires (neither is printed on the source page, so both are quotation items), head/slot acceptance if the countersink is pre-cut (the dk and k rows here dimension the head), quantity per size — and any document requirement (test certificate matching the class) stated up front. Requirements outside the tabulated grid — lengths past 160, threads beyond M24, or a class/finish combination the standard does not list — are confirmed at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7969 Slotted Countersunk Head Bolts (M10 – M24) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 7969 Slotted Countersunk Head Bolts (M10 – M24)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.