DIN 6914 Hex Bolts with Large Head (System HV)
DIN 6914 hexagon bolts with large head, System HV structural bolting, M12–M36 — the collected per-size tables: pitch, shank d s, e, k, r, s and the split "Length of Thread b" rows above/below the source's step line.
Last updated: 2026-11
Specifications
DIN 6914 is the German heavy-hex structural bolt of the HV system — the predecessor that EN 14399-4 formally replaced and the designation still used across a large installed base of drawings and stock lists. Geometry matches its successor at the shared sizes: the large hex head (across-flats 22 at M12, 60 at M36 in the collected tables), the controlled shank and the head height dimensioned for high-preload steel work. The collected tables carry the same per-size ladder as the EN page plus a distinctly DIN-style thread-length presentation: "Length of Thread b" split into values "for lengths above the step line" and "for lengths below the step line" — the DIN convention of a grip-length boundary above which the thread must be longer; the collected page prints the two b values without locating the step line per size (flagged in the table notes), so quote the bolt length and required thread length explicitly. Property classes and finishes stay per RFQ.
| Standard | DIN 6914 — hexagon bolts with large head, System HV structural bolting (superseded by EN 14399-4, which the collected EN page states it replaces) |
|---|---|
| Series | M12 – M36 (two source column groups: M12/M16/M20/M22 and M24/M27/M30/M36) |
| Tabulated geometry | Per size: pitch P, d s (max/min), e (min), k (nominal/max/min), r (min), s (max=nominal, min), Length of Thread b split "for lengths above the step line" / "for lengths below the step line" (b 21–48 / 23–50 as printed) |
| Thread length | The collected page prints the two b values but not the step-line position per size (see table footnote) — state bolt length and thread length explicitly at RFQ |
| Property classes / finishes | Not tabulated by the collected specification — per RFQ (HV assemblies: state class, coating and documentation) |
| Attribute | M12 | M16 | M20 | M22 |
|---|---|---|---|---|
| P — Pitch | 1.75 | 2 | 2.5 | 2.5 |
| d s — Nominal Size | 12 | 16 | 20 | 22 |
| max | 12.7 | 16.7 | 20.84 | 22.84 |
| min | 11.3 | 15.3 | 19.16 | 21.16 |
| e — min | 23.91 | 29.56 | 35.03 | 39.55 |
| k — Nominal Size | 8 | 10 | 13 | 14 |
| max | 8.45 | 10.75 | 13.9 | 14.9 |
| min | 7.55 | 9.25 | 12.1 | 13.1 |
| r — min | 1.2 | 1.2 | 1.5 | 1.5 |
| s — max=nominal size | 22 | 27 | 32 | 36 |
| min | 21.16 | 26.16 | 31 | 35 |
| Length of Thread b — for lengths above the step line | 21 | 26 | 31 | 32 |
| for lengths below the step line | 23 | 28 | 33 | 34 |
- Row 12 (Length of Thread b — for lengths above the step line): The collected page splits thread length b into above/below 'the step line' but does not print where the step line sits for each size; the EN 14399-4 page (its successor per the source) prints a single reference b instead.
| Attribute | M24 | M27 | M30 | M36 |
|---|---|---|---|---|
| P — Pitch | 3 | 3 | 3.5 | 4 |
| d s — Nominal Size | 24 | 27 | 30 | 36 |
| max | 24.84 | 27.84 | 30.84 | 37 |
| min | 23.16 | 26.16 | 29.16 | 35 |
| e — min | 45.2 | 50.85 | 55.37 | 66.44 |
| k — Nominal Size | 15 | 17 | 19 | 23 |
| max | 15.9 | 17.9 | 20.05 | 24.05 |
| min | 14.1 | 16.1 | 17.95 | 21.95 |
| r — min | 1.5 | 2 | 2 | 2 |
| s — max=nominal size | 41 | 46 | 50 | 60 |
| min | 40 | 45 | 49 | 58.8 |
| Length of Thread b — for lengths above the step line | 34 | 37 | 40 | 48 |
| for lengths below the step line | 37 | 39 | 42 | 50 |
- Row 12 (Length of Thread b — for lengths above the step line): The collected page splits thread length b into above/below 'the step line' but does not print where the step line sits for each size; the EN 14399-4 page (its successor per the source) prints a single reference b instead.
Materials
- Material, property class and finish specified per RFQ — drawings naming DIN 6914 usually accept its EN 14399-4 successor; confirm equivalence at quotation
Ordering & documentation
Documents
Shipments of DIN 6914 Hex Bolts with Large Head (System HV) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6914 Hex Bolts with Large Head (System HV) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6914 Hex Bolts with Large Head (System HV)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 6914 Hex Bolts with Large Head (System HV): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 6914 hex bolts with large head (system hv) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 6914 hex bolts with large head (system hv); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6914 hex bolts with large head (system hv) run 3–7 days. High-strength and custom parts for din 6914 hex bolts with large head (system hv) run 15–25 days. Quantities or variants of din 6914 hex bolts with large head (system hv) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6914 Hex Bolts with Large Head (System HV) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6914 hex bolts with large head (system hv) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Our drawing calls DIN 6914 — can we source EN 14399-4 instead?
In practice, yes on geometry: the collected tables show DIN 6914 and EN 14399-4 at the same sizes share head height, across-flats, across-corners and shank dimensions (the EN page states it replaces DIN 6914). What changed with the EN standard is the surrounding system — mark verification, fit classes (HV k-class), test documentation and the EN 14399 nut/washer pairing — so the substitution is a drawing-office decision, not a purchasing one. Two practical notes from the collected pages: DIN 6914's thread-length table splits b "above/below the step line" while EN 14399-4 prints a single reference b, so check the grip length against the EN value; and if the joint is a fatigue- or slip-critical connection, the assembly class and lubrication are part of the specification — name them at RFQ and the documentation follows the order.
What is the MOQ and lead time for this bolt type?
The minimum order quantity for DIN 6914 Hex Bolts with Large Head (System HV) is 1,000–10,000 pieces depending on size. Stock items of DIN 6914 Hex Bolts with Large Head (System HV) ship in 3–7 days; high-strength and custom parts in 15–25 days. Common sizes of DIN 6914 Hex Bolts with Large Head (System HV) are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 6914 Hex Bolts with Large Head (System HV)?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 6914 Hex Bolts with Large Head (System HV) state?
State the full designation (DIN 6914), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6914 Hex Bolts with Large Head (System HV) inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your DIN 6914 Hex Bolts with Large Head (System HV)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support