DIN 940 Studs, Metal End ≈2,5d

DIN 940 double-ended studs with ≈2,5d metal end, M4 to M24 including fine-pitch variants: engagement b1, nut-end b2 by length band, shank ds and the length ladder to 200 mm.

Last updated: 2026-11

Request a Quote

DIN 940 Studs, Metal End ≈2,5d in an industrial setting
Illustrative image redrawn from real DIN 940 Studs, Metal End ≈2,5d product references — not a photograph of stocked items.

Specifications

DIN 940 is the stud for screwed joints where the metal (wrench-flat-free) end screws permanently into the housing — its ≈2,5d engagement length b1 (10 at M4, 17 at M12, 30 at M24) is sized for steel housings, while the nut end b2 is printed in the same three grip bands used on hex bolts (l≤125, l>125≤200, l>200; at M12: 30/36/49). The 07/2010-edition table carries coarse and fine-pitch variants in shared columns (the headers print "M 8 M8X1", "M 10 M10X1.25", "M 12 M12X1.5" through "M 24 M24X2"), the transition shank ds min/max between the two threads, and the x1 thread-runout value. Lengths run 12 to 200 mm with the mass table per size and length. Studs order when the housing thread cannot survive repeated assembly — the stud goes in once, the nut does the servicing.

Standard / scope DIN 940 studs, metal end ≈2,5d — M4 to M24, coarse and fine pitch (edition 07/2010, supersedes 02/1995)
Engagement b1 nom ≈2,5d metal end: 10 (M4), 12.5-class (M5), 15 (M6), 17 (M8-class), 20 (M10-class), 24 (M12-class), 30 (M24)
Nut end b2 By grip band l≤125 / >125≤200 / >200: M8 22/28/41, M12 30/36/49, M24 54/60/73
Transition shank ds min/max per size — the plain portion between the two threads (also the turning diameter for housing fit)
Commercial lengths l Ladder 12 to 200 mm; approximate mass per 1000 pcs (ρ=7,85 kg/dm³) tabulated per size/length
Not tabulated Property class, finish, tapped-hole depth recommendation — state at quotation
DIN 940 studs, metal end ≈2,5d — 07/2010 edition, geometry by thread d (coarse and fine-pitch columns as printed)Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d thread sizeM 4M 5M6M 7M 8 M8X1M 10 M10X1.25M 12 M12X1.5M 14 M14X1.5M 16 M16X1.5M 18 M18X1.5M 20 M20X1.5M 22 M22X1.5M 24 M24X2
b1 nom10131518202530354045505560
b2 (l<=125)14161820222630343842465054
b2 (l>125<=200)20222426283236404448525660
b2 (l>200)-----4549535761656973
ds min/max3.82-44.82-55.82-66.78-77.78-89.78-1011.73-1213.73-1415.73-1617.73-1819.67-2021.67-2223.67-24
x11.752.02.52.53.23.84.35.05.06.36.36.37.5
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 940".
  • Edition row carried from the source grid: "Publication date: 07/2010 Supersedes DIN 940: 02/1995".
DIN 940 — approximate mass, kg per 1000 pcs (ρ=7,85 kg/dm³), commercial lengthsDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d thread sizeM4M5M6M7M8M10M12M14M16M18M20M22M24
nominal length l
12
14
16
18
202.14
222.614.46
252.904.927.26
283.205.387.9311.8
303.405.698.3712.416.3
353.896.469.4813.918.330.7
404.387.2310.615.420.233.851.9
458.0011.716.922.236.956.380.9
508.7712.818.424.239.960.886.9122
5513.92026.243.065.293130167
601521.528.146.169.799138177232
652330.149.274.2105146187344311
7024.532.152.378.5111154197257326394
7534.155.483117161207269341412
803658.487.4123169217281356430
8561.591.9129177227294371447
9064.696.3135185237306386465
9567.7101141193247318401483
10070.8105147201257331415501
110114159217277355445536
120123172232297380475572
130184248317405505607
140196264337429535643
150280357454565678
160296377479594714
170397503624749
180417528654785
190553684820
200577714856
  • Source spanning title row carried verbatim: "DIN 940 -Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm 3 ) - commercial lengths Publication date: 07/2010".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (14/1/2/3/4/5/6/7/8/9/10/11/12/13) — grid padded empty; per-row pre-pad widths: 14,14,1,1,1,1,1,2,3,4,5,6,7,8,9,10,11,12,13,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14.

Materials

  • Studs order in property classes matched to the housing: 5.8/8.8 for general steel work, 10.9/12.9 for high-loaded flanges, A2/A4 stainless for corrosive service — and the fine-pitch columns exist because the nut end often wants the finer thread even when the engagement end stays coarse. State which end is which on the RFQ (metal end into the housing, b1 per the standard), the housing material (the ≈2,5d engagement assumes steel; aluminium wants a longer engagement or a different standard), and finish

Ordering & documentation

Documents

Shipments of DIN 940 Studs, Metal End ≈2,5d are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 940 Studs, Metal End ≈2,5d orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 940 Studs, Metal End ≈2,5d), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 940 Studs, Metal End ≈2,5d: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 940 studs, metal end ≈2,5d is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 940 studs, metal end ≈2,5d; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 940 studs, metal end ≈2,5d run 3–7 days. High-strength and custom parts for din 940 studs, metal end ≈2,5d run 15–25 days. Quantities or variants of din 940 studs, metal end ≈2,5d outside the standard range are confirmed at quotation.

Storage & shipping

DIN 940 Studs, Metal End ≈2,5d are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 940 studs, metal end ≈2,5d dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 939 also covers studs — how do I choose between the two metal ends?

By engagement length: DIN 939 carries the ≈1,25d metal end for through or deep steel housings, while the DIN 940 tabulated here carries ≈2,5d for the shorter, blind or softer housings where every millimetre of thread counts — the b1 column is the discriminator (17 mm at M12-class versus roughly half that on 939). Read your tapped-hole depth: the metal end must bottom out with a thread or two to spare, so a shallow boss wants the long 940 end, and a deep through-hole is usually cheaper on 939. If the drawing names the standard, follow it — the two are not interchangeable in a blind hole without re-checking depth.

The column headers print both coarse and fine pitch (e.g. "M 12 M12X1.5") — which pitch am I getting?

The column serves the pair: the b1/b2/ds values are common to both, and the pitch you receive is what the order states — coarse by default, fine where the header names it (M8X1, M10X1.25, M12X1.5 through M24X2). The fine-pitch nut end is the common choice on vibration-exposed and hydraulic flanges. To remove ambiguity on the RFQ, write the full designation — "stud DIN 940 M12×1.5 nut end × 80, metal end M12 coarse" — and we confirm both threads and the ds transition on the order acknowledgement before production.

What is the MOQ and lead time for DIN 940 Studs, Metal End ≈2,5d?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 940 Studs, Metal End ≈2,5d state?

State the full designation (DIN 940 Studs, Metal End ≈2,5d), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 940 Studs, Metal End ≈2,5d inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 940 Studs, Metal End ≈2,5d
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.