DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck)

Mushroom (round) head square neck carriage bolts per DIN 603, ISO equivalent ISO 8678 — a smooth domed head that cannot be gripped from above and a square neck that self-anchors in wood. M5–M20 metric line plus the inch-series round head square neck range; the timber and coach bolt.

Last updated: 2026-11

Request a Quote

DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck) in an industrial setting
Illustrative image redrawn from real DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck) product references — not a photograph of stocked items.

Specifications

The carriage bolt is built for exactly one installation direction: the smooth domed head sits proud of the surface and gives no wrench faces, so the bolt is tightened entirely from the nut side — while the square shoulder under the head bites into a square-cut hole in timber and resists the shaft turning as the nut is torqued. That combination (anti-vandal smooth head plus self-anchoring neck) is why it dominates wood-to-wood and wood-to-metal construction: fencing, trailer decks, play structures, agricultural equipment. DIN 603 is the metric designation and ISO 8678 its ISO equivalent; the collected stock program runs M5 to M20 with lengths up to 80 mm, and the inch-series round head square neck range is documented from #10 through 3/4 diameter. Order by designation and note that the hole must be square-cut or drilled square at the neck for the anti-turn feature to engage.

Standard DIN 603 — mushroom head square neck carriage bolt; ISO equivalent: ISO 8678
Head Smooth domed head — prevents tightening or loosening from above
Neck Square shoulder below the head self-anchors in wood and resists turning while the nut is tightened
Metric size range M5 – M20, lengths up to 80 mm (stock program)
Inch-series range (reference) Round head square neck bolts tabulated from #10 through 3/4 in diameter
Exemplar dimension (1/4 in) Body dia max 0.260 / min 0.237 in; head dia max 0.594 / min 0.563 in; head height max 0.145 / min 0.125 in
Installation Drill square at the neck; drive the square shoulder into the hole, tighten from the nut side only
Typical applications Timber construction, fencing, trailer and vehicle decks, play equipment, agricultural machinery

Materials

  • Steel
  • Stainless steel

DIN 603 gets its character from the domed head and square neck: the neck prevents rotation and the smooth low head suits timber.

Stainless variants run A2-70 and A4-70/80 in G304/G316, while steel zinc-plated versions cover general construction — state the variant and property class on the RFQ, because carriage bolt alone does not fix the material.

Ordering & documentation

Documents

Shipments of DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 603 / iso 8678 carriage bolts (round head square neck) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 603 / iso 8678 carriage bolts (round head square neck); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 603 / iso 8678 carriage bolts (round head square neck) run 3–7 days. High-strength and custom parts for din 603 / iso 8678 carriage bolts (round head square neck) run 15–25 days. Quantities or variants of din 603 / iso 8678 carriage bolts (round head square neck) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 603 / iso 8678 carriage bolts (round head square neck) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why does a carriage bolt spin, and is that a defect?

Below the domed head, a carriage bolt carries a square neck sized to bite into the material. In timber, the bolt is seated by striking the head so the square shoulder embeds; from then on the shaft will not turn and all torque goes to the nut. If the bolt spins during tightening, the hole was not squared into the neck (drilled round through metal or hardwood) or the neck has pulled out of soft timber — the fix is a square plate or washer arrangement at the head side, not a bigger hammer. The spinning feature is also the point on the exposed face: with no wrench faces, the smooth head cannot be backed off from outside.

What is the MOQ and lead time for this bolt grade?

The minimum order quantity for DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck) is 1,000–10,000 pieces depending on size. Stock items of DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck) ship in 3–7 days; high-strength and custom parts in 15–25 days. Common diameters of DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck) are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this bolt grade state?

For DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck), state the standard and grade (for example ISO 4017 Class 8.8 or ASTM F3125 Grade A325 Type 1), diameter and length, thread type (metric coarse or UNC/UNF), finish (plain, zinc, or hot-dip galvanized where the grade permits), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 603 / ISO 8678 Carriage Bolts (Round Head Square Neck)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.