GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B
GB 5783-1986 fully threaded hexagon head bolts, product grades A and B, M3 to M64: pitch, thread runout a, head shear c, bearing diameters, across-flats and across-corners, head height, fillet radius and wrench size ladders.
Last updated: 2026-11
Specifications
GB 5783 is the Chinese standard's full-thread counterpart to the ISO 4017-style hex bolt, and the collected table runs the whole ladder M3 to M64 — 25 sizes including the parenthesized non-preferred steps, printed with the parentheses. The attribute rows come in min/max pairs per feature: pitch P (0.5 at M3 to 6 at M64), thread runout a, head shear c, bearing face da and dw, across-corners e (Grade A and Grade B rows — at M16, 26.75/26.17 for A/B), head height k (max 2 at M3 to 40 at M64 with the min rows behind it), k1, fillet radius r, and width across flats s from 5.5 to 95 nominal with its tolerance ladder. The grade-A/grade-B distinction is visible in the table itself: at the small sizes the grade-B min/max cells print "-" (not tabulated — Grade A values only), and the e and s min rows split by grade from M5 up. Against the registered ISO 4017 page this is the GB-designation identity; quoting GB 5783 on a drawing means this ladder, in this case the 1986 edition.
| Standard / scope | GB 5783-1986 hexagon head bolts, full thread, product grades A and B — M3 to M64 with non-preferred sizes parenthesized, as printed |
|---|---|
| Pitch P / runout a | P 0.5 (M3) to 6 (M64); a max 1.5 (M3) to 18 (M64) — with grade-B "-" cells at the small sizes |
| Width across flats s | 5.5 (M3) to 95 (M64) nominal; min ladder 5.32 to 92.8 with Grade A/B rows as printed |
| Width across corners e | Grade A min 6.07 (M3) to 39.98 (M24) then 45.2 (M27) to 104.86 (M64); Grade B rows from M5 (8.63) — both carried per grade |
| Head height k / k1 | k max 2 (M3) to 15 (M24), then 17 to 40 (M64) with min and grade-B rows; k1 1.3 (M3) to 10.35 (M24), then 11.7 to 27.1 (M64) |
| Not tabulated | Lengths (full thread to the head by definition), mechanical property classes, finishes — per RFQ against the property-class standards |
| Attribute | Sub-label | Note | M3 | M4 | M5 | M6 | M8 | M10 | M12 | (M14) | M16 | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | (M45) | M48 | (M52) | M56 | (M60) | M64 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 0.5 | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 | |
| a | a | 1.5 | 2.1 | 2.4 | 3 | 3.75 | 4.5 | 5.25 | 6 | 6 | 7.5 | 7.5 | 7.5 | 9 | 9 | 10.5 | 10.5 | 12 | 12 | 13.5 | 13.5 | 15 | 15 | 16.5 | 16.5 | 18 | |
| a | a | - | - | - | - | - | - | - | 2 | - | 2.5 | - | 2.5 | - | 3 | - | 3.5 | - | 4 | 4.5 | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 | |
| c | c | 0.4 | 0.4 | 0.5 | 0.5 | 0.6 | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |
| c | c | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | |
| d a | d a | 3.6 | 4.7 | 5.7 | 6.8 | 9.2 | 11.2 | 13.7 | 15.7 | 17.7 | 20.2 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 48.6 | 48.6 | 56.6 | 56.6 | 67 | 67 | 75 | |
| d w | d w | Grade A | 4.6 | 5.9 | 6.9 | 8.9 | 11.6 | 14.6 | 16.6 | 19.6 | 22.5 | 25.3 | 28.2 | 31.7 | 33.6 | - | - | - | - | - | - | - | - | - | - | - | - |
| d w | d w | - | - | 6.7 | 8.7 | 11.4 | 14.4 | 16.4 | 19.2 | 22 | 24.8 | 27.7 | 31.4 | 33.2 | 38 | 42.7 | 46.6 | 51.1 | 55.9 | 60.6 | 64.7 | 69.4 | 74.2 | 78.7 | 83.41 | 88.2 | |
| e | e | Grade A | 6.07 | 7.66 | 8.79 | 11.05 | 14.38 | 17.77 | 20.03 | 23.35 | 26.75 | 30.14 | 33.53 | 37.72 | 39.98 | - | - | - | - | - | - | - | - | - | - | - | - |
| e | e | - | - | 8.63 | 10.89 | 14.2 | 17.59 | 19.85 | 22.78 | 26.17 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 72.02 | 76.95 | 82.6 | 88.25 | 93.56 | 99.21 | 104.86 | |
| k | k | 2 | 2.8 | 3.5 | 4 | 5.3 | 6.4 | 7.5 | 8.8 | 10 | 11.5 | 12.5 | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | 28 | 30 | 33 | 35 | 38 | 40 | |
| k | k | 1.88 | 2.68 | 3.35 | 3.85 | 5.15 | 6.22 | 7.32 | 8.62 | 9.82 | 11.28 | 12.28 | 13.78 | 14.78 | - | - | - | - | - | - | - | - | - | - | - | - | |
| k | k | 2.12 | 2.92 | 3.65 | 4.15 | 5.45 | 6.58 | 7.68 | 8.98 | 10.18 | 11.72 | 12.72 | 14.22 | 15.22 | - | - | - | - | - | - | - | - | - | - | - | - | |
| k | k | - | - | 3.26 | 3.76 | 5.06 | 6.11 | 7.21 | 8.51 | 9.71 | 11.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 24.75 | 27.58 | 28.95 | 32.5 | 33.75 | 37.5 | 38.75 | |
| k | k | - | - | 3.74 | 4.24 | 5.54 | 6.69 | 7.79 | 9.09 | 10.29 | 11.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 27.05 | 28.42 | 31.05 | 33.5 | 36.25 | 38.5 | 41.25 | |
| k 1 | k 1 | Grade A | 1.3 | 1.9 | 2.35 | 2.7 | 3.6 | 4.35 | 5.12 | 6 | 6.9 | 7.9 | 8.6 | 9.6 | 10.35 | - | - | - | - | - | - | - | - | - | - | - | - |
| k 1 | k 1 | - | - | 2.28 | 2.63 | 3.54 | 4.28 | 5.05 | 6 | 6.8 | 7.8 | 8.5 | 9.5 | 10.3 | 11.7 | 12.8 | 14.4 | 15.5 | 17.2 | 17.5 | 19.3 | 20.1 | 22.8 | 23.6 | 26.2 | 27.1 | |
| r | r | 0.1 | 0.2 | 0.2 | 0.25 | 0.4 | 0.4 | 0.6 | 0.6 | 0.6 | 0.6 | 0.8 | 1 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 | |
| s | s | 5.5 | 7 | 8 | 10 | 13 | 16 | 18 | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | |
| s | s | 5.32 | 6.78 | 7.78 | 9.78 | 12.73 | 15.73 | 17.73 | 20.67 | 23.67 | 26.67 | 29.67 | 33.38 | 35.38 | - | - | - | - | - | - | - | - | - | - | - | - | |
| s | s | - | - | 7.64 | 9.64 | 12.57 | 15.57 | 17.57 | 20.16 | 23.16 | 26.76 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.8 | 68.1 | 73.1 | 78.1 | 82.8 | 87.8 | 92.8 |
- '-' cells are the source's not-tabulated markers — on the min/max sub-rows and the Grade B columns of d w, e, k, k 1, s (Grade A values only at the small sizes), carried verbatim.
- Identity note: the acquisition filename for this collected page reads DIN 562 but the page itself prints GB 5783-1986 (detail.php sid=MjAxMDY=); identity taken from the page title, mismatch recorded in the batch evidence ledger.
Materials
- GB full-thread hex bolts ship in the usual property classes (8.8 the industrial default; 4.8 and 10.9 on request) and zinc or black finishes; the A/B on this page is the product grade of the geometry — tolerance class — not a strength grade, and the two must not be confused on the RFQ. Quote the property class, finish and any GB/ISO equivalence expectation explicitly; if the drawing says GB 5783 the 1986 geometry is what the table carries
Ordering & documentation
Documents
Shipments of GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for gb 5783-1986 hexagon head bolts, full thread, product grades a and b is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for gb 5783-1986 hexagon head bolts, full thread, product grades a and b; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for gb 5783-1986 hexagon head bolts, full thread, product grades a and b run 3–7 days. High-strength and custom parts for gb 5783-1986 hexagon head bolts, full thread, product grades a and b run 15–25 days. Quantities or variants of gb 5783-1986 hexagon head bolts, full thread, product grades a and b outside the standard range are confirmed at quotation.
Storage & shipping
GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store gb 5783-1986 hexagon head bolts, full thread, product grades a and b dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why do some cells print "-" in the grade-B columns at small sizes?
Because at the smaller sizes the standard tabulates the min/max geometry for product grade A only — grade B bolts in those diameters are defined by the nominal rows, not by separate tolerance bands. The collected table carries those cells as "-" exactly as printed. Practically: if your RFQ says grade A, the full max/min ladder applies; if grade B at the small sizes, expect the geometry to follow the nominal/grade-A rows. Confirm which product grade the drawing demands before quoting tolerance-critical fitments.
Is GB 5783 interchangeable with ISO 4017 hardware?
Largely yes at the common sizes — the across-flats, head height and bearing-face ladders sit on the same ISO 4014-family architecture, which is why both identities are registered separately but read similarly. The differences are in the edition details: this table is the 1986 edition (a newer GB/T revision exists upstream of the collected page), and thread runout a, e minima and the grade split carry edition-specific values. For general industrial assembly the parts interchange; for anything where a standard is cited contractually, buy to the designation the drawing prints — GB 5783 if it says GB 5783, ISO 4017 if it says ISO 4017 — and let the RFQ carry that citation through to the certificate.
What is the MOQ and lead time for GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B state?
State the full designation (GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your GB 5783-1986 Hexagon Head Bolts, Full Thread, Product Grades A and B
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support