DIN 609 Hex Fit Bolts (Fitted Shank)

DIN 609 hex fit bolts, M8–M52 with K6 fitted shank — bolts with a ground cylindrical bearing shank for shear-loaded reamed holes, with the collected per-size tables: coarse/fine pitches, three-regime b ladder, d s K6, d 0, e, k, k 1, r and s.

Last updated: 2026-11

Request a Quote

DIN 609 Hex Fit Bolts (Fitted Shank) in an industrial setting
Illustrative image redrawn from real DIN 609 Hex Fit Bolts (Fitted Shank) product references — not a photograph of stocked items.

Specifications

A fit bolt (Passschraube) is a bolt whose unthreaded shank is ground to a K6 tolerance so it can be dropped into a reamed hole and carry shear as a precision dowel — the bolt and the pin in one part. DIN 609 is the long-thread version: the thread starts immediately below the head and runs long (the collected b ladder runs 14.5–27.5 at the small sizes), leaving a generous fitted shank to bridge the joint. Where vibration or reversing shear loads would hammer an ordinary clearance bolt into its hole wall, the fit bolt's K6 shank bears across the full joint thickness with no slack — the standard answer for locating bolts on gear housings, press frames, crane slewing rings and dies. The collected tables run M8 to M52 in coarse plus two fine pitches, with the fitted shank d s printed as "Nominal Size (K6)" with min/max, the unthreaded portion d 0, across-corners e, head height k, bearing-check k 1, fillet r and across-flats s. Note the fit-bolt arithmetic: the nominal thread size and the shank differ (M8 bolt → 9 mm shank, M10 → 11 mm), so the reamed hole follows the shank column, not the thread. Property classes and finishes stay per RFQ.

Standard DIN 609 — hexagon fit bolts with long thread (fitted shank for reamed holes)
Series M8 – M52 (six source column groups; parenthesized non-preferred sizes) — coarse plus fine thread-1/2 pitch rows as printed
Tabulated geometry Per size: pitch P (coarse/fine-1/fine-2), b ladder (L≤50 / 50<L≤150 / L>150), fitted shank d s Nominal Size (K6) with min/max (K6 tolerance), unthreaded shank d 0 (min/max), e (min), k (nominal/min/max), k 1 (min), r (min/max), s (max=nominal, min)
Shank fit d s ground to K6 as printed — the reamed hole is sized to the shank column (M8→9 mm … M16→17 mm), not the thread designation
Property classes / finishes Not tabulated by the collected specification — per RFQ (fit bolts for shear duty are typically 8.8 or 10.9 with reamed holes H7/K6 mating; confirm at quotation)
DIN 609 hex fit bolts - per-size dimensions (M8 - M12)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (coarse plus fine thread-1/2 rows, '-' where a fine pitch does not apply); b = thread length in three regimes; d s = fitted shank diameter with K6 tolerance as printed; d 0 = unthreaded shank diameter (min/max); e = width across corners; k = head height; k 1 = head-bearing check height; r = fillet radius (min/max); s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed.
AttributeM8M10M12
P — Pitch — Coarse thread1.251.51.75
Fine thread-111.251.25
Fine thread-2-11.5
b — L≤5014.517.520.5
50<L≤ 15016.519.522.5
L>15021.524.527.5
d s — Nominal Size (K6)91113
min9.00111.00113.001
max9.0111.01213.012
d 0 — min7.99.911.5
max8.210.211.8
e — min14.3817.7719.85
k — Nominal Size5.36.47.5
min5.156.227.21
max5.456.587.79
k 1 — min3.614.355.05
r — min0.40.40.6
max0.550.550.75
s — max=nominal size131618
min12.7315.7317.57
  • Row 5 (50<L≤ 150): The source prints the thread-length regime boundaries with full-width characters ('50<L≤ 150' / 'L>150'); the row labels reproduce them verbatim.
DIN 609 hex fit bolts - per-size dimensions ((M14) - (M18))All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (coarse plus fine thread-1/2 rows, '-' where a fine pitch does not apply); b = thread length in three regimes; d s = fitted shank diameter with K6 tolerance as printed; d 0 = unthreaded shank diameter (min/max); e = width across corners; k = head height; k 1 = head-bearing check height; r = fillet radius (min/max); s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed.
Attribute(M14)M16(M18)
P — Pitch — Coarse thread222.5
Fine thread-11.51.51.5
Fine thread-2--2
b — L≤50222527.5
50<L≤ 150242729.5
L>150293234.5
d s — Nominal Size (K6)151719
min15.00117.00119.002
max15.01217.01219.015
d 0 — min13.515.517.5
max13.815.817.8
e — min22.7826.1729.56
k — Nominal Size8.81011.5
min8.519.7111.15
max9.0910.2911.85
k 1 — min5.966.87.81
r — min0.60.60.6
max0.750.750.75
s — max=nominal size212427
min20.1623.1626.16
  • Row 5 (50<L≤ 150): The source prints the thread-length regime boundaries with full-width characters ('50<L≤ 150' / 'L>150'); the row labels reproduce them verbatim.
DIN 609 hex fit bolts - per-size dimensions (M20 - M24)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (coarse plus fine thread-1/2 rows, '-' where a fine pitch does not apply); b = thread length in three regimes; d s = fitted shank diameter with K6 tolerance as printed; d 0 = unthreaded shank diameter (min/max); e = width across corners; k = head height; k 1 = head-bearing check height; r = fillet radius (min/max); s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed.
AttributeM20(M22)M24
P — Pitch — Coarse thread2.52.53
Fine thread-11.51.52
Fine thread-2221.5
b — L≤5028.532.5-
50<L≤ 15030.534.536.5
L>15035.539.541.5
d s — Nominal Size (K6)212325
min21.00223.00225.002
max21.01523.01525.015
d 0 — min19.121.123.1
max19.421.423.4
e — min32.9537.2939.55
k — Nominal Size12.51415
min12.1513.6514.65
max12.8514.3515.35
k 1 — min8.519.6510.26
r — min0.80.80.8
max0.950.950.95
s — max=nominal size303436
min29.163335
  • Row 5 (50<L≤ 150): The source prints the thread-length regime boundaries with full-width characters ('50<L≤ 150' / 'L>150'); the row labels reproduce them verbatim.
DIN 609 hex fit bolts - per-size dimensions ((M27) - (M33))All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (coarse plus fine thread-1/2 rows, '-' where a fine pitch does not apply); b = thread length in three regimes; d s = fitted shank diameter with K6 tolerance as printed; d 0 = unthreaded shank diameter (min/max); e = width across corners; k = head height; k 1 = head-bearing check height; r = fillet radius (min/max); s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed.
Attribute(M27)M30(M33)
P — Pitch — Coarse thread33.53.5
Fine thread-1222
Fine thread-2---
b — L≤50---
50<L≤ 15039.54345
L>15044.54850
d s — Nominal Size (K6)283234
min28.00232.00234.002
max28.01532.01834.018
d 0 — min25.729.731.7
max263032
e — min45.250.8555.37
k — Nominal Size171921
min16.6518.5820.58
max17.3519.4221.42
k 1 — min11.6613.0114.41
r — min111
max1.151.151.15
s — max=nominal size414650
min404549
  • Row 5 (50<L≤ 150): The source prints the thread-length regime boundaries with full-width characters ('50<L≤ 150' / 'L>150'); the row labels reproduce them verbatim.
DIN 609 hex fit bolts - per-size dimensions (M36 - M42)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (coarse plus fine thread-1/2 rows, '-' where a fine pitch does not apply); b = thread length in three regimes; d s = fitted shank diameter with K6 tolerance as printed; d 0 = unthreaded shank diameter (min/max); e = width across corners; k = head height; k 1 = head-bearing check height; r = fillet radius (min/max); s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed.
AttributeM36(M39)M42
P — Pitch — Coarse thread444
Fine thread-1333
Fine thread-2---
b — L≤50---
50<L≤ 150495156
L>150545661
d s — Nominal Size (K6)384044
min38.00240.00244.002
max38.01840.01844.018
d 0 — min35.737.741.7
max363842
e — min60.7966.4471.3
k — Nominal Size222526
min21.5824.5825.58
max22.4225.4226.42
k 1 — min15.1117.2117.91
r — min111
max1.151.151.15
s — max=nominal size556065
min53.858.863.1
  • Row 5 (50<L≤ 150): The source prints the thread-length regime boundaries with full-width characters ('50<L≤ 150' / 'L>150'); the row labels reproduce them verbatim.
DIN 609 hex fit bolts - per-size dimensions ((M45) - (M52))All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (coarse plus fine thread-1/2 rows, '-' where a fine pitch does not apply); b = thread length in three regimes; d s = fitted shank diameter with K6 tolerance as printed; d 0 = unthreaded shank diameter (min/max); e = width across corners; k = head height; k 1 = head-bearing check height; r = fillet radius (min/max); s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed.
Attribute(M45)M48(M52)
P — Pitch — Coarse thread444
Fine thread-1333
Fine thread-2---
b — L≤50---
50<L≤ 150596365
L>150646870
d s — Nominal Size (K6)465055
min46.00250.00255.002
max46.01850.01855.021
d 0 — min43.747.752.7
max444853
e — min76.9582.688.25
k — Nominal Size283033
min27.5829.5832.5
max28.4230.4233.5
k 1 — min19.3120.7122.75
r — min111
max1.151.151.15
s — max=nominal size707580
min68.173.178.1
  • Row 5 (50<L≤ 150): The source prints the thread-length regime boundaries with full-width characters ('50<L≤ 150' / 'L>150'); the row labels reproduce them verbatim.

Materials

  • Material and property class specified per RFQ — state hole diameter and ream tolerance with the order: the K6 shank only fits what the mating parts were reamed to

Ordering & documentation

Documents

Shipments of DIN 609 Hex Fit Bolts (Fitted Shank) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 609 Hex Fit Bolts (Fitted Shank) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 609 Hex Fit Bolts (Fitted Shank)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 609 Hex Fit Bolts (Fitted Shank): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 609 hex fit bolts (fitted shank) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 609 hex fit bolts (fitted shank); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 609 hex fit bolts (fitted shank) run 3–7 days. High-strength and custom parts for din 609 hex fit bolts (fitted shank) run 15–25 days. Quantities or variants of din 609 hex fit bolts (fitted shank) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 609 Hex Fit Bolts (Fitted Shank) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 609 hex fit bolts (fitted shank) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 609 (long thread) or DIN 610 (short thread) fit bolts — which one?

By the joint's grip versus the shear length you need. Both carry the same K6 fitted shank and the same head; the collected tables show the difference in the thread-length ladders — DIN 609's b runs 14.5–27.5 at M8–M12 (long thread, more clamping adjustment), DIN 610's runs 11.5–15.5 (short thread, the shank-dominated version). The short-thread DIN 610 puts more of its length into reamed bearing, which is the pick where the joint is a pure shear/dowel connection and the two plates are fixed in position; the long-thread DIN 609 buys nut engagement for joints with a stack-up or where a locking nut runs a long way. One trap worth naming: the shank is one size up from the thread (M10 bolt, 11 mm shank), so a "DIN 609 M10" never fits a 10 mm hole — order by shank diameter for the hole and thread size for the nut. And because the fit is the whole point, state the reamed hole tolerance and any running-fit requirement (H7 is typical) at RFQ; the property class rides along with that confirmation.

What is the MOQ and lead time for this bolt type?

The minimum order quantity for DIN 609 Hex Fit Bolts (Fitted Shank) is 1,000–10,000 pieces depending on size. Stock items of DIN 609 Hex Fit Bolts (Fitted Shank) ship in 3–7 days; high-strength and custom parts in 15–25 days. Common sizes of DIN 609 Hex Fit Bolts (Fitted Shank) are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 609 Hex Fit Bolts (Fitted Shank)?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 609 Hex Fit Bolts (Fitted Shank) state?

State the full designation (DIN 609), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 609 Hex Fit Bolts (Fitted Shank) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 609 Hex Fit Bolts (Fitted Shank)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.