DIN 607 Cup Head Nib Bolts

DIN 607 cup head nib bolts, M8–M16 — the nib-driven counterpart of the carriage bolt: domed cup head, cylindrical grip with nibs against rotation, with the collected per-size tables: pitch, b ladder, d k, d s, g, i, k and r.

Last updated: 2026-11

Request a Quote

DIN 607 Cup Head Nib Bolts in an industrial setting
Illustrative image redrawn from real DIN 607 Cup Head Nib Bolts product references — not a photograph of stocked items.

Specifications

DIN 607 pairs the familiar domed cup head of the carriage bolt with the nib drive of DIN 604: two small nibs under the head key into the seating face and hold the bolt while the nut is run up, in a plain round hole. Compared with the square-neck DIN 603, the nib drive is gentler on thin or brittle outer plies and needs only drilled tooling; compared with its countersunk sibling DIN 604, the cup head stands proud and carries more bearing area — the choice where a flush seat is not required. The head radius r (≈ 8.9–15.8 in the collected tables) is what gives the carriage look and the snag-resistant profile on timber frames, racking and agricultural ironwork. The collected tables run M8 to M16: pitch, the three-regime thread-length b ladder (b 3 tabulated only from M16 — "/" below, see table footnote), head diameter d k, shank d s, nib width g, nib height i, head height k, head radius r and nib fillet r 2. Property classes and finishes stay per RFQ.

Standard DIN 607 — cup head nib bolts (domed head, two nibs against rotation)
Series M8 – M16 (one source column group)
Tabulated geometry Per size: pitch P, b ladder (L≤125 / 125<L≤200 / L>200, "/" at M8–M12 L>200), d k (max/min, 16.55–30.65), d s (max/min), nib width g (max/min), nib height i (min), k (max/min), head radius r (≈), nib fillet r 2 (max)
Head seat Domed cup head standing proud — larger bearing area than the countersunk DIN 604; nibs key into the seating face in a plain round hole
Property classes / finishes Not tabulated by the collected specification — per RFQ
DIN 607 cup head nib bolts - per-size dimensions (M8 - M16)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; b = thread length in the three length regimes (L≤125 / 125<L≤200 / L>200); d k = head diameter; d s = shank diameter; g = nib width; i = nib height; k = head height; r = head radius (≈ as printed); r 2 = nib fillet radius. '/' where the source does not tabulate the cell.
AttributeM8M10M12M16
P — Pitch1.251.51.752
b — L≤12522263038
125<L≤20028323644
L>200///57
d k — max16.5519.6524.6530.65
min15.4518.3523.3529.35
d s — max8101216
min7.429.4211.315.3
g — max33.23.64.2
min2.62.723.123.72
i — min2.32.73.23.5
k — max6.387.459.6511.75
min5.626.558.7510.65
r — ≈8.910.513.315.8
r 2 — max0.50.511
  • Row 4 (L>200): The source prints '/' at M8/M10/M12 for the L>200 regime — b 3 is tabulated only from M16.

Materials

  • Material and finish specified per RFQ — hot-dip galvanized and stainless executions are common for outdoor timber and agricultural work; confirm at quotation

Ordering & documentation

Documents

Shipments of DIN 607 Cup Head Nib Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 607 Cup Head Nib Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 607 Cup Head Nib Bolts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 607 Cup Head Nib Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 607 cup head nib bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 607 cup head nib bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 607 cup head nib bolts run 3–7 days. High-strength and custom parts for din 607 cup head nib bolts run 15–25 days. Quantities or variants of din 607 cup head nib bolts outside the standard range are confirmed at quotation.

Storage & shipping

DIN 607 Cup Head Nib Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 607 cup head nib bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Where does a nib bolt beat a square-neck carriage bolt?

In the hole, and in the ply. The square neck of a DIN 603 carriage bolt needs a square hole to bite — it punches cleanly in timber but has to be machined in metal, and in thin sheet it distorts the ply. DIN 607's two nibs need only two shallow marks from a round drilled hole, so on steel chutes, sheet-metal cladding, racking and any retrofit where the outer ply cannot be punched square, the nib bolt installs with a drill and holds against torque just the same. The cup head keeps the carriage-bolt advantages: domed, snag-resistant, good bearing on soft faces, no exposed thread on the loaded side. The collected tables show the nib is a modest feature — nib width g 3–4.2 and height i 2.3–3.5 across M8–M16 — but it carries the full anti-rotation duty, so the seating face material matters: hard steels take the nib marks fine, and soft plastics or laminates may want the DIN 604 countersunk form or a toothed washer instead. Confirm the finish for the environment at RFQ.

What is the MOQ and lead time for this bolt type?

The minimum order quantity for DIN 607 Cup Head Nib Bolts is 1,000–10,000 pieces depending on size. Stock items of DIN 607 Cup Head Nib Bolts ship in 3–7 days; high-strength and custom parts in 15–25 days. Common sizes of DIN 607 Cup Head Nib Bolts are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 607 Cup Head Nib Bolts?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 607 Cup Head Nib Bolts state?

State the full designation (DIN 607), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 607 Cup Head Nib Bolts inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 607 Cup Head Nib Bolts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.