DIN 2510 L/NF Stud Bolt and Nut Weight Chart

Per-piece weights in kg for DIN 2510 L/NF wafer-style stud bolts M12 - M52 at lengths 50 - 300+, plus the per-nut weight row per size — the shipping and weld-neck flange planning numbers, carried from the collected chart with its staircase blanks verbatim.

Last updated: 2026-11

Request a Quote

DIN 2510 L/NF Stud Bolt and Nut Weight Chart in an industrial setting
Illustrative image redrawn from real DIN 2510 L/NF Stud Bolt and Nut Weight Chart product references — not a photograph of stocked items.

Specifications

DIN 2510 is the wafer-style (reduced-shank) stud for high-temperature flanged joints, and its weight matters for two very practical reasons: freight on flange-sets is priced by the kilo, and the reduced shank is precisely why these studs are lighter than a full-thread stud of the same size. The collected chart tabulates per-piece weight in kg across M12 - M52 and lengths from 50 up past 300, and the shape of the data is the design itself: the staircase of blanks shows which length/size combinations are offered (M12 starts at 0.0888 kg for a 50 mm stud and the top of the chart runs single-digit kilograms at M52 x 300), with each size picking up where its ladder begins. The chart closes with a per-nut weight row (0.031 kg at M12 up to 1.34 kg at M52) — the number you add per nut when a flange set is quoted. Two reading rules from the source, carried as printed: blank cells are unoffered combinations, not zeros, and the M24/L210 cell prints 78.48 against a column whose neighbours run 0.5-0.9 — flagged in the table below as the source's own figure, not corrected. Weights are per piece as charted; they are not a substitute for certified shipping weights — per RFQ.

Chart basis DIN 2510 L/NF wafer-style stud bolts (reduced shank) — per-piece weight in kg as printed on the collected chart
Thread sizes M12 - M52 in 14 columns (M12, M16, M20, M24, M27, M30, M33, M36, M39, M42, M45, M48, M52)
Lengths Rows from 50 mm upward (50 - 300+ range tabulated), staircase layout: blank cells are combinations not offered, carried blank not zero
Anchor weights M12 x 50: 0.0888 kg; M16 x 60: 0.192 kg; M20 x 70: 0.3361 kg; M52 x 180: 5.42 kg — reduced-shank DIN 2510 studs run lighter than full-thread studs of the same size
Per-nut weights Summary row: 0.031 kg (M12), 0.052 (M16), 0.086 (M20), 0.124 (M24), 0.26 (M30), 0.425 (M36), 0.705 (M42), 1.34 kg (M52) — add per nut when pricing flange sets
Flagged verbatim M24/L210 prints 78.48 against neighbours at 0.5-0.9 — the source's own figure, carried and flagged; confirm per RFQ before relying on it
DIN 2510 L/NF stud bolt and nut weight chart — Dia/Length / M12 / M16 / M20 (table 1 of 1)Weights in kg per piece as printed. Rows are lengths (50 - 300+), columns are thread sizes M12 - M52; the chart is staircase-shaped and empty cells mark length/size combinations not offered, carried as blank cells (not zeros). The chart also prints per-nut weights for each size and a "weight per nut" summary row as on the source.
Dia/LengthM12M16M20M24M27M30M33M36M39M42M45M48M52
500.0888
550.0911
600.09330.192
650.09550.1964
700.09770.20080.3361
750.10.20520.343
800.10220.20950.34990.5048
850.10440.21380.35650.5148
900.10660.21820.36340.52480.7416
950.10890.2230.37030.53480.7546
1000.11110.22750.37770.54480.76751.0206
1100.11560.23640.39160.56480.79351.05331.3457
1200.120.24530.40550.58480.81951.0861.38581.766
1300.12440.25410.41940.60480.84551.11871.42581.8122.221
1400.12890.2630.43330.62480.87151.15141.46591.8592.28
1500.13340.27190.44720.64480.89751.18421.5061.9052.342.713.55
1600.13780.28070.46110.66480.92351.21691.54611.9522.42.783.63
1700.14220.28970.47490.70480.94951.24961.58621.9992.462.843.74.48
1800.14690.29850.48880.72480.97551.28931.62632.0452.5192.93.784.575.42
1900.30740.50270.74481.00151.3151.66642.0922.5792.973.864.655.53
2000.31630.51660.76481.02731.34781.70652.1382.6393.033.944.745.63
2100.530578.481.05331.38051.74662.1852.6983.14.014.835.73
2200.54450.80481.07931.41321.78672.2322.7583.164.094.915.84
2300.55830.82481.10531.44591.82682.2782.8173.234.1755.94
2400.57220.84481.13131.47861.86682.3252.8773.294.255.096.04
2500.58610.86481.15731.51141.90692.3722.9373.364.335.176.15
2600.59990.88481.18331.54411.9472.4182.9963.424.45.266.25
2700.61380.90481.20931.57681.98712.4653.0563.494.485.356.35
2800.62780.92481.23531.60952.02722.5113.1153.554.565.436.46
2900.64170.94481.26131.64222.06732.5583.1753.624.645.526.56
3000.65560.96481.28731.67492.10742.6053.2343.684.715.616.66
3100.66950.98481.31331.70772.14752.6513.2943.744.795.696.77
3200.68331.00481.33931.74042.18762.6983.3533.814.875.786.87
3301.02481.36531.77312.22762.7443.4133.884.955.876.97
3401.39131.80512.26772.7913.4733.945.025.957.08
3501.41731.83852.30782.8383.5224.015.16.047.18
3601.44331.87122.34792.8843.5924.085.186.137.28
3701.90392.3882.9313.6514.155.266.217.39
3801.93662.52812.9783.7114.225.346.37.49
weight per nut0.0310.0520.0860.1240.1810.260.330.4250.560.7050.91.121.34
  • Row 21 (200): The M24/L210 cell prints 78.48 against a column ladder whose neighbours run 0.5-0.9 — the source's own figure, flagged not corrected; treat as a probable decimal-point defect and confirm per RFQ.
  • Blank cells are the chart's staircase (length/size combinations not offered), carried as empty cells, not zeros; the 'weight per nut' summary row is the source's own labeling.

Materials

  • DIN 2510 wafer studs are typically supplied in the high-temperature classes the flange standard assumes; weight is material-density-driven, so a stainless or alloy build shifts these figures with density. State material class on the RFQ and we confirm the chart weight against the actual certificate

Ordering & documentation

Documents

Shipments of DIN 2510 L/NF Stud Bolt and Nut Weight Chart are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 2510 L/NF Stud Bolt and Nut Weight Chart orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 2510 L/NF Stud Bolt and Nut Weight Chart), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 2510 L/NF Stud Bolt and Nut Weight Chart: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 2510 l/nf stud bolt and nut weight chart is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 2510 l/nf stud bolt and nut weight chart; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 2510 l/nf stud bolt and nut weight chart run 3–7 days. High-strength and custom parts for din 2510 l/nf stud bolt and nut weight chart run 15–25 days. Quantities or variants of din 2510 l/nf stud bolt and nut weight chart outside the standard range are confirmed at quotation.

Storage & shipping

DIN 2510 L/NF Stud Bolt and Nut Weight Chart are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 2510 l/nf stud bolt and nut weight chart dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why are DIN 2510 wafer studs lighter than ordinary studs of the same size — and when does the difference pay?

Because the shank is turned down to roughly the pitch diameter: only the threaded ends carry full diameter. The chart shows the consequence in kg — at M36 x 180 the tabulated 2.045 kg per stud sits well below what a full-diameter stud of the same size and length weighs. That lighter shank is not a cost gimmick: the reduced, smooth section lowers notch exposure along the length and is the classic choice for high-temperature flanges where the stud must flex with thermal cycling. The weight difference pays where it multiplies: a reactor flange requiring dozens of stud-and-nut sets sees the freight and handling difference directly, and the per-nut row (0.425 kg at M36) lets the set be priced complete. Note the chart weights are nominal planning figures from the collected source — certified weights per delivery come with the certificate, per RFQ.

The M24 row shows 78.48 at L210 — is that the real weight?

Almost certainly not, and the page says so. The surrounding ladder at M24 runs 0.5048 (L80) through about 0.9 kg in that length range, so a 78.48 kg single stud is off by two orders of magnitude — the collected chart prints it that way and we carry it verbatim with an anomaly flag rather than silently "correcting" it to a guessed value. The buying discipline this row illustrates applies to any chart weight: treat published per-piece weights as planning numbers, check any figure that sits off its column ladder (this one is flagged in the rendered table), and require the certified weight on the delivery paperwork for anything where freight or criticality makes the kilo matter. For the M24/L210 line specifically, ask on the RFQ and we confirm against the stock item.

What is the MOQ and lead time for DIN 2510 L/NF Stud Bolt and Nut Weight Chart?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 2510 L/NF Stud Bolt and Nut Weight Chart state?

State the full designation (DIN 2510 L/NF Stud Bolt and Nut Weight Chart), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 2510 L/NF Stud Bolt and Nut Weight Chart inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 2510 L/NF Stud Bolt and Nut Weight Chart
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.