Spanner and Wrench Clearance Around Bolt Heads
Wrench-access clearance dimensions around hex bolt heads and nuts, M 3 to M 36 — clearance a/b/c, clearance hole, minimum plate thickness, G clearance, nominal spanner (A/F) size and square-drive sizes — in two tabulated layouts.
Last updated: 2026-11
Specifications
Before a bolted joint exists on paper, it has to be assemble-able: a wrench needs room to swing, sockets need depth, and the plate behind the head needs a hole and enough thickness. This reference collects two independently tabulated clearance layouts from the collected page. The first layout covers M 3 to M 36 with, per size: the clearance hole diameter (M 8: 9.0 mm), the minimum plate thickness Min P, three clearance dimensions a, b and c around the head, the additional clearance G, the nominal spanner size across flats (M 12: A/F 19) and the square-drive size with drive square in parentheses (29 (12.5) at M 12). The second layout re-tabulates M 16 to M 36 with its own — substantially larger — Min P, clearance and spanner-adjacent values (M 24: Min P 84, clearances 48/40/55), reflecting a different layout convention on the source page; both layouts are carried verbatim side by side, and the values do not transfer between them. Use whichever layout your drawing or checking convention follows, and keep the wrench swing in mind: the a/b/c dimensions are the minimum envelope, not comfort clearances. Head dimensions themselves (widths across flats per ISO 4014/4017) are on the product pages — this page is the access envelope. Not-tabulated: counterbore depths, torque-access for powered tools — per RFQ.
| Layout 1 range | M 3 to M 36, 12 sizes: hole D, Min P, clearance a/b/c, G, spanner A/F, square drive H |
|---|---|
| Layout 2 range | M 16 to M 36, 5 sizes: Min P, clearance a/b/c, G, spanner A/F (independent tabulation, larger values) |
| Worked examples | Layout 1 M 10: hole 11.0, Min P 37, a/b/c 28/14/21, G 27, A/F 17, drive 27 (12.5); layout 2 M 20: Min P 64, a/b/c 48/28/42, G 48, A/F 32 |
| Units | mm; square-drive column prints the drive square in parentheses, e.g. 42 (20) |
| Not tabulated | Head dimensions per ISO 4014/4017, counterbores, tool-specific swing radii — per RFQ |
| Size | Hole D | Min P | Clearance | G | S Nominal Spanner Size A/F | H Square Drive | ||
|---|---|---|---|---|---|---|---|---|
| a | b | c | ||||||
| M3 | 3.4 | 14 | 10 | 8 | 10 | - | 5.5 | 14 (6.3) |
| M4 | 4.5 | 17 | 10 | 8 | 12 | 14 | 7 | 22 (10) |
| M5 | 5.5 | 20 | 10 | 8 | 12 | 14 | 8 | 22 (10) |
| M6 | 6.6 | 24 | 14 | 10 | 15 | 17 | 10 | 26 (12.5) |
| M8 | 9.0 | 30 | 18 | 12 | 18 | 22 | 13 | 26 (12.5) |
| M10 | 11.0 | 37 | 28 | 14 | 21 | 27 | 17 | 27 (12.5) |
| M12 | 13.5 | 42 | 30 | 16 | 22 | 30 | 19 | 29 (12.5) |
| M16 | 17.5 | 50 | 30 | 20 | 26 | 38 | 24 | 42 (20) |
| M20 | 22.0 | 60 | 32 | 22 | 32 | 46 | 30 | 47 (20) |
| M24 | 26.0 | 75 | 48 | 25 | 38 | 55 | 36 | 54 (20) |
| M30 | 33.0 | 94 | 60 | 30 | 48 | 70 | 46 | 70 (25) |
| M36 | 39.0 | 104 | 60 | 34 | 52 | 90 | 55 | 81 (25) |
- Row 1 (): the sub-header row assigns a/b/c to the Clearance column group; carried as the source prints it
- Row 2 (M3): M3 row prints G as "-" (no G clearance tabulated at M3); carried verbatim
| Size | Min P | Clearance | G | S Nominal Spanner Size A/F | ||
|---|---|---|---|---|---|---|
| a | b | c | ||||
| M16 | 56 | 30 | 25 | 38 | 27 | 27 |
| M20 | 64 | 48 | 28 | 42 | 48 | 32 |
| M24 | 84 | 48 | 40 | 55 | 65 | 41 |
| M30 | 98 | 60 | 45 | 65 | 77 | 50 |
| M36 | 112 | 60 | 45 | 70 | 81 | 60 |
- Row 1 (): sub-header assigns a/b/c to the Clearance group as printed
- Row 2 (M16): M16 G and spanner both print 27; M20 G prints 48 against a 32 spanner — values as printed, not normalized (the two layouts on this page are independent tabulations)
Materials
- Clearance geometry is independent of fastener material, but the joint around it is not: when you RFQ plates, brackets or welded assemblies that must accept these clearances, state the fastener size, the layout (1 or 2) your checking follows, and whether the access side is machined or as-rolled — Min P and the clearance envelope then drive the plate thickness and machining you order
Ordering & documentation
Documents
Shipments of Spanner and Wrench Clearance Around Bolt Heads are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Spanner and Wrench Clearance Around Bolt Heads orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (Spanner and Wrench Clearance Around Bolt Heads), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for Spanner and Wrench Clearance Around Bolt Heads: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for spanner and wrench clearance around bolt heads is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for spanner and wrench clearance around bolt heads; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for spanner and wrench clearance around bolt heads run 3–7 days. High-strength and custom parts for spanner and wrench clearance around bolt heads run 15–25 days. Quantities or variants of spanner and wrench clearance around bolt heads outside the standard range are confirmed at quotation.
Storage & shipping
Spanner and Wrench Clearance Around Bolt Heads are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store spanner and wrench clearance around bolt heads dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why are there two different clearance tables for the same M 16 - M 36 sizes?
Because the collected page tabulates two independent layout conventions side by side, and we carry both verbatim. Layout 1 gives the compact envelope (M 16: Min P 50, clearance 30/20/26, A/F 24); layout 2 gives a generous envelope (M 16: Min P 56, clearance 30/25/38, G 27 against spanner 27). The numbers differ exactly where layout philosophy differs — minimum plate thickness and the room the wrench gets to swing. Neither is wrong; each matches a different checking practice. The failure mode to avoid is mixing them: reading Min P from layout 2 with clearances from layout 1 produces a joint that neither fits nor checks. Pick the layout your drawing references, use one table throughout, and flag which one you used when you RFQ the mating plates.
How much clearance does a wrench actually need around a bolt head?
Read it off the a/b/c columns for the fastener size, then add tool allowance. For the common mid-range: M 10 needs a 28 x 14 x 21 mm envelope (layout 1) around an 11.0 mm hole, M 16 needs 30 x 20 x 26 — the "a" dimension is the swing direction and dominates, which is why it grows fastest in layout 2 (M 24: 48). A ring spanner needs almost exactly the tabulated envelope; an open-end or socket with extension needs more, especially in "a". The G column is additional clearance beyond a/b/c where the tabulation carries it (blank or "-" at M 3 in layout 1). Design the access first, then confirm the hole and plate: hole D and Min P columns give the minimums (M 20: 22.0 hole, Min P 60 in layout 1 vs 64 in layout 2). For assemblies where access is tight, send the stack-up with the RFQ so assembly feasibility is checked before order.
What is the MOQ and lead time for Spanner and Wrench Clearance Around Bolt Heads?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for Spanner and Wrench Clearance Around Bolt Heads state?
State the full designation (Spanner and Wrench Clearance Around Bolt Heads), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your Spanner and Wrench Clearance Around Bolt Heads inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your Spanner and Wrench Clearance Around Bolt Heads
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support