ISO 4016 Hexagon Head Bolts, Production Class C
ISO 4016 hexagon head bolts with nut, production class C M5 to M64 — the wide-tolerance rough hex bolt with the collected attribute ladder (preferred + non-preferred sizes) and the full ls/lg grip tables to l 500.
Last updated: 2026-11
Specifications
Production class C is the tolerance regime, not a strength grade: ISO 4016 bolts are the rough hex bolts with generous allowances (the e/s tolerances are wider than the class A/B ISO 4014 counterparts this catalog carries), used where the nut fit only has to work — site fabrication, agricultural implements, formwork, temporary structures. The collected page is the deepest in this batch: the preferred-size attribute ladder M5 – M64 (P, b engagement bands with the source's glyph-substituted comparison signs carried verbatim, c, da, ds, dw, e min 8,63 → 104,86, k, kw, r, s with the source's mixed 8,00/36 decimal forms flagged) plus the non-preferred band M14 – M60 (k nominal prints 11.5 dot-decimal at M18 — flagged). Thread length/grip: full ls/lg tables for both size bands, l 25 – 500, transcribed as raw grids because the source interleaves the ls/lg header band over two cells per size — the pairing is not re-derived, and the flag on those tables tells you to confirm the thread/grip split per RFQ. "Bolts with nut" per the title: the shank is unthreaded through the grip, so the bearing and shear case is the bolt's home ground. Property class (class C commonly runs 4.6/5.6), material and finish are not tabulated — per RFQ.
| Standard | ISO 4016 — hexagon head bolts with nut, production class C (wide-tolerance hex bolt) |
|---|---|
| Size range | M5 – M64 preferred; M14 – M60 non-preferred band; grip tables l 25 – 500 |
| Hex geometry | s nominal=max. 8,00 → 95,0 (Min. 7,64 → 92,8); e min. 8,63 → 104,86 |
| Head / shank | k nominal 3,5 → 40; ds max. 5,48 → 65,2; r min. 0,2 → 2 |
| Grip tables | ls/lg ladders for both size bands, carried as raw grids — the interleaved ls/lg header band is flagged, not reinterpreted |
| Flagged verbatim | b-band comparison signs print as '?' (capture glyph loss); s row mixes 8,00 / 36 / 55,0 forms; M18 k prints 11.5 dot-decimal |
| Material / class / finish | Class C = tolerance regime; property class (commonly 4.6/5.6), material and finish not tabulated — per RFQ |
| Thread d | M5 | M6 | M8 | M10 | M12 | M16 | M20 | M24 | M30 | M36 | M42 | M48 | M56 | M64 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P | 0,8 | 1 | 1,25 | 1,5 | 1,75 | 2 | 2,5 | 3 | 3,5 | 4 | 4,5 | 5 | 5,5 | 6 | ||
| b | l?125mm | 16 | 18 | 22 | 26 | 30 | 38 | 46 | 54 | 66 | - | - | - | - | - | |
| 125mm< l ? 200mm | 22 | 24 | 28 | 32 | 36 | 44 | 52 | 60 | 72 | 84 | 96 | 108 | - | - | ||
| l > 200mm | 35 | 37 | 41 | 45 | 49 | 57 | 65 | 73 | 85 | 97 | 109 | 121 | 137 | 153 | ||
| c | max. | 0,5 | 0,5 | 0,6 | 0,6 | 0,6 | 0,8 | 0,8 | 0,8 | 0,8 | 0,8 | 1 | 1 | 1 | 1 | |
| da | max. | 6 | 7,2 | 10,2 | 12,2 | 14,7 | 18,7 | 24,4 | 28,4 | 35,4 | 42,4 | 48,6 | 56,6 | 67 | 75 | |
| ds | max. | 5,48 | 6,48 | 8,58 | 10,58 | 12,7 | 16,7 | 20,84 | 24,84 | 30,84 | 37 | 43 | 49 | 57,2 | 65,2 | |
| min. | 4,52 | 5,52 | 7,42 | 9,42 | 11,3 | 15,3 | 19,16 | 23,16 | 29,16 | 35 | 41 | 47 | 54,8 | 62,8 | ||
| dw | min. | 6,74 | 8,74 | 11,47 | 14,47 | 16,47 | 22 | 27,7 | 33,25 | 42,75 | 51,11 | 59,95 | 69,45 | 78,66 | 88,16 | |
| e | min. | 8,63 | 10,89 | 14,2 | 17,59 | 19,85 | 26,17 | 32,95 | 39,55 | 50,85 | 60,79 | 71,3 | 82,6 | 93,56 | 104,86 | |
| k | nominal | 3,5 | 4 | 5,3 | 6,4 | 7,5 | 10 | 12,5 | 15 | 18,7 | 22,5 | 26 | 30 | 35 | 40 | |
| max. | 3,875 | 4,375 | 5,675 | 6,85 | 7,95 | 10,75 | 13,4 | 15,9 | 19,75 | 23,55 | 27,05 | 31,05 | 36,25 | 41,25 | ||
| min. | 3,125 | 3,625 | 4,925 | 5,95 | 7,05 | 9,25 | 11,6 | 14,1 | 17,65 | 21,45 | 24,95 | 28,95 | 33,75 | 38,75 | ||
| kw | min. | 2,19 | 2,54 | 3,45 | 4,17 | 4,94 | 6,48 | 8,12 | 9,87 | 12,36 | 15,02 | 17,47 | 20,27 | 23,63 | 27,13 | |
| r | min. | 0,2 | 0,25 | 0,4 | 0,4 | 0,6 | 0,6 | 0,8 | 0,8 | 1 | 1 | 1,2 | 1,6 | 2 | 2 | |
| s | nominal=max. | 8,00 | 10,00 | 13,00 | 16,00 | 18,00 | 24,00 | 30,00 | 36 | 46 | 55,0 | 65,0 | 75,0 | 85,0 | 95,0 | |
| min. | 7,64 | 9,64 | 12,57 | 15,57 | 17,57 | 23,16 | 29,16 | 35 | 45 | 53,8 | 63,1 | 73,1 | 82,8 | 92,8 |
- Row 16 (s): the s nominal=max. row mixes decimal forms verbatim: 8,00 / 10,00 / 13,00 against 36 / 46 and 55,0 / 65,0 further along the ladder - the source's own inconsistent formatting, not normalized
| Thread d | M5 | M6 | M8 | M10 | M12 | M16 | M20 | M24 | M30 | M36 | M42 | M48 | M56 | M64 | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| l | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ||
| Nominal | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. |
| 25 | 23,95 | 26,05 | 5 | 9 | ||||||||||||||||||||||||||
| 30 | 28,95 | 31,05 | 10 | 14 | 7 | 12 | ||||||||||||||||||||||||
| 35 | 33,75 | 36,25 | 15 | 19 | 12 | 17 | ||||||||||||||||||||||||
| 40 | 38,75 | 41,25 | 20 | 24 | 17 | 22 | 11,75 | 18 | ||||||||||||||||||||||
| 45 | 43,75 | 46,25 | 25 | 29 | 22 | 27 | 16,75 | 23 | 11,5 | 19 | ||||||||||||||||||||
| 50 | 48,75 | 51,25 | 30 | 34 | 27 | 32 | 21,75 | 28 | 16,5 | 24 | ||||||||||||||||||||
| 55 | 53,5 | 56,5 | 32 | 37 | 26,75 | 33 | 21,5 | 29 | 16,25 | 25 | ||||||||||||||||||||
| 60 | 58,5 | 61,5 | 37 | 42 | 31,75 | 38 | 26,5 | 34 | 21,25 | 30 | ||||||||||||||||||||
| 65 | 63,5 | 66,5 | 36,75 | 43 | 31,5 | 39 | 26,25 | 35 | 17 | 27 | ||||||||||||||||||||
| 70 | 68,5 | 71,5 | 41,75 | 48 | 36,5 | 44 | 31,25 | 40 | 22 | 32 | ||||||||||||||||||||
| 80 | 78,5 | 81,5 | 51,75 | 58 | 46,5 | 54 | 41,25 | 50 | 32 | 42 | 21,5 | 34 | ||||||||||||||||||
| 90 | 88,25 | 91,75 | 56,5 | 64 | 51,25 | 60 | 42 | 52 | 31,5 | 44 | ||||||||||||||||||||
| 100 | 98,25 | 101,75 | 66,5 | 74 | 61,25 | 70 | 52 | 62 | 41,5 | 54 | 31 | 46 | ||||||||||||||||||
| 110 | 108,25 | 111,75 | 71,25 | 80 | 62 | 72 | 51,5 | 64 | 41 | 56 | ||||||||||||||||||||
| 120 | 118,25 | 121,75 | 81,25 | 90 | 72 | 82 | 61,5 | 74 | 51 | 66 | 36,5 | 54 | ||||||||||||||||||
| 130 | 128 | 132 | 76 | 86 | 65,5 | 78 | 55 | 70 | 40,5 | 58 | ||||||||||||||||||||
| 140 | 138 | 142 | 86 | 96 | 75,5 | 88 | 65 | 80 | 50,5 | 68 | 36 | 56 | ||||||||||||||||||
| 150 | 148 | 152 | 96 | 106 | 85,5 | 98 | 75 | 90 | 60,5 | 78 | 46 | 66 | ||||||||||||||||||
| 160 | 156 | 164 | 106 | 116 | 95,5 | 108 | 85 | 100 | 70,5 | 88 | 56 | 76 | ||||||||||||||||||
| 180 | 176 | 184 | 115,5 | 128 | 105 | 120 | 90,5 | 108 | 76 | 96 | 61,5 | 84 | ||||||||||||||||||
| 200 | 195,4 | 204,6 | 135,5 | 148 | 125 | 140 | 110,5 | 128 | 96 | 116 | 81,5 | 104 | 67 | 92 | ||||||||||||||||
| 220 | 215,4 | 224,6 | 132 | 147 | 117,5 | 135 | 103 | 123 | 88,5 | 111 | 74 | 99 | ||||||||||||||||||
| 240 | 235,4 | 244,6 | 152 | 167 | 137,5 | 155 | 123 | 143 | 108,5 | 131 | 94 | 119 | 75,5 | 103 | ||||||||||||||||
| 260 | 254,8 | 265,2 | 157,5 | 175 | 143 | 163 | 128,5 | 151 | 114 | 139 | 95,5 | 123 | 77 | 107 | ||||||||||||||||
| 280 | 274,8 | 285,2 | 177,5 | 195 | 163 | 183 | 148,5 | 171 | 134 | 159 | 115,5 | 143 | 97 | 127 | ||||||||||||||||
| 300 | 294,8 | 305,2 | 197,5 | 215 | 183 | 203 | 168,5 | 191 | 154 | 179 | 135,5 | 163 | 117 | 147 | ||||||||||||||||
| 320 | 314,3 | 325,7 | 203 | 223 | 188,5 | 211 | 174 | 199 | 155,5 | 183 | 137 | 167 | ||||||||||||||||||
| 340 | 334,3 | 345,7 | 223 | 243 | 208,5 | 231 | 194 | 219 | 175,5 | 203 | 157 | 187 | ||||||||||||||||||
| 360 | 354,3 | 365,7 | 243 | 263 | 228,5 | 251 | 214 | 239 | 195,5 | 223 | 177 | 207 | ||||||||||||||||||
| 380 | 374,3 | 385,7 | 248,5 | 271 | 234 | 259 | 215,5 | 243 | 197 | 227 | ||||||||||||||||||||
| 400 | 394,3 | 405,7 | 268,5 | 291 | 254 | 279 | 235,5 | 263 | 217 | 247 | ||||||||||||||||||||
| 420 | 413,7 | 426,3 | 288,5 | 311 | 274 | 299 | 255,5 | 283 | 237 | 267 | ||||||||||||||||||||
| 440 | 433,7 | 446,3 | 294 | 319 | 275,5 | 303 | 257 | 287 | ||||||||||||||||||||||
| 460 | 453,7 | 466,3 | 314 | 339 | 295,5 | 323 | 277 | 307 | ||||||||||||||||||||||
| 480 | 473,7 | 486,3 | 334 | 359 | 315,5 | 343 | 297 | 327 | ||||||||||||||||||||||
| 500 | 493,7 | 506,3 | 335,5 | 363 | 317 | 347 |
- Row 3 (25): the ls/lg header band is interleaved (two header rows over two cells per size) and the capture cannot re-derive which cell belongs to ls vs lg per size - the grid is carried verbatim without reinterpretation; confirm the thread/grip split per RFQ
| Thread d (non-preferred dimensions) | M14 | M18 | M22 | M27 | M33 | M39 | M45 | M52 | M60 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | 2 | 2,5 | 2,5 | 3 | 3,5 | 4 | 4,5 | 5 | 5,5 | ||
| b | l?125mm | 34 | 42 | 50 | 60 | - | - | - | |||
| 125mm< l ? 200mm | 40 | 48 | 56 | 66 | 78 | 90 | 102 | 116 | |||
| l > 200mm | 53 | 61 | 69 | 79 | 91 | 103 | 115 | 129 | 145 | ||
| c | max. | 0,6 | 0,8 | 0,8 | 0,8 | 0,8 | 1 | 1 | 1 | 1 | |
| da | max. | 16,7 | 21,2 | 26,4 | 32,4 | 38,4 | 45,4 | 52,6 | 62,6 | 71 | |
| ds | max. | 14,7 | 18,7 | 22,84 | 27,84 | 34 | 40 | 46 | 53,2 | 61,2 | |
| min. | 13,3 | 17,3 | 21,16 | 26,16 | 32 | 38 | 44 | 50,8 | 58,8 | ||
| dw | min. | 19,15 | 24,85 | 31,35 | 38 | 46,55 | 55,86 | 64,7 | 74,2 | 83,41 | |
| e | min. | 22,78 | 29,56 | 37,29 | 45,2 | 55,37 | 66,44 | 76,95 | 88,25 | 99,21 | |
| k | nominal | 8,8 | 11.5 | 14 | 17 | 21 | 25 | 28 | 33 | 38 | |
| max. | 9,25 | 12,4 | 14,9 | 17,9 | 22,05 | 26,05 | 29,05 | 34,25 | 39,25 | ||
| min. | 8,35 | 10,6 | 13,1 | 16,1 | 19,95 | 23.95 | 26,95 | 31,75 | 36,75 | ||
| kw | min. | 5,85 | 7,42 | 9,17 | 11,27 | 13,97 | 16,77 | 18,87 | 22,23 | 25,73 | |
| r | min. | 0,6 | 0,6 | 0,8 | 1 | 1 | 1 | 1,2 | 1,6 | 2 | |
| s | nominal=max. | 21,00 | 27,00 | 34 | 41 | 50 | 60,0 | 70,0 | 80,0 | 90,0 | |
| min. | 20,16 | 26,16 | 33 | 40 | 49 | 58,8 | 68,1 | 78,1 | 87,8 |
- Row 11 (k): dot decimals appear inside the comma-decimal ladder: k nominal M18 prints 11.5 and k min. M39 prints 23.95 - carried verbatim
| Thread d (non-preferred dimensions) | M14 | M18 | M22 | M27 | M33 | M39 | M45 | M52 | M60 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| l | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ls | lg | ||
| nominal | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. | min. | max. |
| 60 | 58,5 | 61,5 | 16 | 26 | ||||||||||||||||
| 65 | 63,5 | 66,5 | 21 | 31 | ||||||||||||||||
| 70 | 68,5 | 71,5 | 26 | 36 | ||||||||||||||||
| 80 | 78,5 | 81,5 | 36 | 46 | 25,5 | 38 | ||||||||||||||
| 90 | 88,25 | 91,75 | 46 | 56 | 35,5 | 48 | 27,5 | 40 | ||||||||||||
| 100 | 98,25 | 101,75 | 56 | 66 | 45,5 | 58 | 37,5 | 50 | ||||||||||||
| 110 | 108,25 | 111,75 | 66 | 76 | 55,5 | 68 | 47,5 | 60 | 35 | 50 | ||||||||||
| 120 | 118,25 | 121,75 | 76 | 86 | 65,5 | 78 | 57,5 | 70 | 45 | 60 | ||||||||||
| 130 | 128 | 132 | 80 | 90 | 69,5 | 82 | 61,5 | 74 | 49 | 64 | 34,5 | 52 | ||||||||
| 140 | 138 | 142 | 90 | 100 | 79,5 | 92 | 71,5 | 84 | 59 | 74 | 44,5 | 62 | ||||||||
| 150 | 148 | 152 | 89,5 | 102 | 81,5 | 94 | 69 | 84 | 54,5 | 72 | 40 | 60 | ||||||||
| 160 | 156 | 164 | 99,5 | 112 | 91,5 | 104 | 79 | 94 | 64,5 | 82 | 50 | 70 | ||||||||
| 180 | 176 | 184 | 119,5 | 132 | 111,5 | 124 | 99 | 114 | 84,5 | 102 | 70 | 90 | 55,5 | 78 | ||||||
| 200 | 195,4 | 204,6 | 131,5 | 144 | 119 | 134 | 104,5 | 122 | 90 | 110 | 75,5 | 98 | 59 | 84 | ||||||
| 220 | 215,4 | 224,6 | 138,5 | 151 | 126 | 141 | 111,5 | 129 | 97 | 117 | 82,5 | 105 | 66 | 91 | ||||||
| 240 | 235,4 | 244,6 | 146 | 161 | 131,5 | 149 | 117 | 137 | 102,5 | 125 | 86 | 111 | 67,5 | 95 | ||||||
| 260 | 254,8 | 265,2 | 166 | 181 | 151,5 | 167 | 137 | 157 | 122,5 | 145 | 106 | 131 | 87,5 | 115 | ||||||
| 280 | 274,8 | 285,2 | 171,5 | 189 | 157 | 177 | 142,5 | 165 | 126 | 151 | 107,5 | 135 | ||||||||
| 300 | 294,8 | 305,2 | 191,5 | 209 | 177 | 197 | 162,5 | 185 | 146 | 171 | 127,5 | 155 | ||||||||
| 320 | 314,3 | 325,7 | 211,5 | 229 | 197 | 217 | 182,5 | 205 | 166 | 191 | 147,5 | 175 | ||||||||
| 340 | 334,3 | 345,7 | 217 | 237 | 202,5 | 225 | 186 | 211 | 167,5 | 195 | ||||||||||
| 360 | 354,3 | 365,7 | 237 | 257 | 222,5 | 245 | 206 | 231 | 187,5 | 215 | ||||||||||
| 380 | 374,3 | 385,7 | 257 | 277 | 242,5 | 265 | 226 | 251 | 207,5 | 235 | ||||||||||
| 400 | 394,3 | 405,7 | 277 | 297 | 262,5 | 285 | 246 | 271 | 227,5 | 255 | ||||||||||
| 420 | 413,7 | 426,3 | 282,5 | 305 | 266 | 291 | 247,5 | 275 | ||||||||||||
| 440 | 433,7 | 446,3 | 302,5 | 325 | 286 | 311 | 267,5 | 295 | ||||||||||||
| 460 | 453,7 | 466,3 | 306 | 331 | 287,5 | 315 | ||||||||||||||
| 480 | 473,7 | 486,3 | 326 | 351 | 307,5 | 335 | ||||||||||||||
| 500 | 493,7 | 506,3 | 346 | 371 | 327,5 | 355 |
Materials
- Property class and finish specified per RFQ — class C hex bolts commonly run 4.6/5.6 mild steel, often hot-dip galvanized for site work; state the load case (shear through the shank vs clamped) and corrosion environment at quotation, and note the wide class C tolerances when pairing with drilled templates
Ordering & documentation
Documents
Shipments of ISO 4016 Hexagon Head Bolts, Production Class C are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 4016 Hexagon Head Bolts, Production Class C orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 4016 Hexagon Head Bolts, Production Class C), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ISO 4016 Hexagon Head Bolts, Production Class C: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for iso 4016 hexagon head bolts, production class c is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for iso 4016 hexagon head bolts, production class c; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 4016 hexagon head bolts, production class c run 3–7 days. High-strength and custom parts for iso 4016 hexagon head bolts, production class c run 15–25 days. Quantities or variants of iso 4016 hexagon head bolts, production class c outside the standard range are confirmed at quotation.
Storage & shipping
ISO 4016 Hexagon Head Bolts, Production Class C are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 4016 hexagon head bolts, production class c dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Class C (ISO 4016) or class A/B (ISO 4014) hex bolt — when does the rough tolerance actually matter?
When the hole position is uncertain, the rough bolt is the friendlier one. Class C widens the tolerances on the hex and shank (compare the collected e min. ladder with the ISO 4014 page's), so it drops through slotted or badly aligned site holes that a close-tolerance bolt fights, and it costs less — which is why formwork, fencing, farm implements and temporary works spec it. What it gives up: fit precision (a reamed, close-tolerance joint needs class A/B or a fitted bolt) and the tight shank concentricity a machined assembly wants. Two reading notes from the capture, carried verbatim: the b engagement bands print their comparison signs as "?" (glyph loss — read as the standard up-to/from bands), and the ls/lg grip tables keep the source's interleaved header band without re-deriving which cell is thread vs grip — if your order depends on the exact grip length, confirm it per RFQ rather than reading the grid. Class C is a tolerance class, not a strength grade: the common 4.6/5.6 classes and any galvanizing are per RFQ.
What is the MOQ and lead time for ISO 4016 Hexagon Head Bolts, Production Class C?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 4016 Hexagon Head Bolts, Production Class C state?
State the full designation (ISO 4016), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 4016 Hexagon Head Bolts, Production Class C inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your ISO 4016 Hexagon Head Bolts, Production Class C
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support