ISO 2904 Metric Trapezoidal Screw Threads

ISO 2904 basic dimensions for ISO metric trapezoidal screw threads — 70 Tr designations from Tr 8 × 1.5 to Tr 100 × 12 with pitch diameter d2 = D2, D4, d3, D1 and crest clearance ac per designation.

Last updated: 2026-11

Request a Quote

ISO 2904 Metric Trapezoidal Screw Threads in an industrial setting
Illustrative image redrawn from real ISO 2904 Metric Trapezoidal Screw Threads product references — not a photograph of stocked items.

Specifications

The trapezoidal (Tr) thread is the 30°-flank profile that power transmission screws use — lead screws, valve and gate stems, presses, machine-table traverses — and ISO 2904 is the standard that fixes its basic geometry: for each designation it tabulates the major diameter d (with the mating internal major D 4 = d + clearance), the pitch P, the pitch diameters d 2 = D 2 (shared by screw and nut), the external minor d 3 and internal minor D 1 of the design profile, and the crest clearance a c (0.15 for the 1.5 mm pitches, 0.25 up to P 6, 0.5 at P 7 and coarser). The collected ladder covers 70 designations from Tr 8 × 1.5 to Tr 100 × 12: smaller diameters carry fine and medium pitches (Tr 12 in 2 and 3), while from roughly Tr 30 upward each diameter pairs a 3–4 mm pitch with a coarse multi-start-friendly option (Tr 40 × 7, Tr 60 × 9, Tr 100 × 12). The governing standards around it are collected too: ISO 2901 (basic and design profiles), ISO 2902 (the full diameter/pitch plan), ISO 2903 (tolerance system) and ISO 2903-2 (limits of sizes). This site also carries the DIN 103 trapezoidal line — rod, hex nut and round nut — which is a separate designation from this ISO ladder; order by the standard your drawing calls. Thread-fit class, multi-start variants, lengths, materials and nut styles are not tabulated on the collected page — per RFQ.

Standard ISO 2904 — basic dimensions for ISO metric trapezoidal screw threads
Profile Trapezoidal 30° included flank angle (profiles per ISO 2901; plan per ISO 2902)
Designation range Tr 8 × 1.5 through Tr 100 × 12 — 70 diameter × pitch designations in the collected rows
Tabulated geometry d (= D), P, d 2 = D 2, D 4, d 3, D 1, a c per designation (millimetres)
Crest clearance a c 0.15 (P 1.5); 0.25 (P 2–6); 0.5 (P 7 and coarser)
Related standards ISO 2901 (profiles), ISO 2902 (plan), ISO 2903 / ISO 2903-2 (tolerances and limits of sizes)
Not tabulated Tolerance class, starts, lengths, materials, nut styles — per RFQ
ISO 2904 metric trapezoidal screw threads - basic dimensions per designation (Tr 8 x 1.5 - Tr 100 x 12, 70 designations)All dimensions in millimetres. Symbols are the ISO design-profile values, carried verbatim from the collected page: d = basic major diameter (D = d), P = pitch, d 2 = D 2 = basic pitch diameter (screw and nut share it), D 4 = internal-thread major diameter, d 3 = external-thread minor diameter of the design profile, D 1 = internal-thread minor diameter, a c = crest clearance (0.15 at P 1.5, 0.25 at P 2-6, 0.5 at P 7 and coarser). These are basic-profile values; manufactured threads take a tolerance class per ISO 2903 - per RFQ.
DesignationdPd 2 = D 2D 4d 3D 1a c
Tr 8 × 1.581.57.2508.3006.2006.5000.15
Tr 9 × 1.591.58.2509.3007.2007.5000.15
Tr 9 × 2928.0009.5006.5007.0000.25
Tr 10 × 1.5101.59.25010.3008.2008.5000.15
Tr 10 × 21029.00010.5007.5008.0000.25
Tr 11 × 211210.00011.5008.5009.0000.25
Tr 11 × 31139.50011.5007.5008.0000.25
Tr 12 × 212211.00012.5009.50010.0000.25
Tr 12 × 312310.50012.5008.5009.0000.25
Tr 14 × 214213.00014.50011.50012.0000.25
Tr 14 × 314312.50014.50010.50011.0000.25
Tr 16 × 216215.00016.50013.50014.0000.25
Tr 16 × 316314.50016.50012.50013.0000.25
Tr 18 × 218217.00018.50015.50016.0000.25
Tr 18 × 418416.00018.50013.50014.0000.25
Tr 20 × 220219.00020.50017.50018.0000.25
Tr 20 × 420418.00020.50015.50016.0000.25
Tr 22 × 322320.50022.50018.50019.0000.25
Tr 22 × 522519.50022.50016.50017.0000.25
Tr 24 × 324322.50024.50020.50021.0000.25
Tr 24 × 524521.50024.50018.50019.0000.25
Tr 26 × 326324.50026.50022.50023.0000.25
Tr 26 × 526523.50026.50020.50021.0000.25
Tr 28 × 328326.50028.50024.50025.0000.25
Tr 28 × 528525.50028.50022.50023.0000.25
Tr 30 × 330328.50030.50026.50027.0000.25
Tr 30 × 630627.00030.50023.50024.0000.25
Tr 32 × 332330.50032.50028.50029.0000.25
Tr 32 × 632629.00032.50025.50026.0000.25
Tr 34 × 334332.50034.50030.50031.0000.25
Tr 34 × 634631.00034.50027.50028.0000.25
Tr 36 × 336334.50036.50032.50033.0000.25
Tr 36 × 636633.00036.50029.50030.0000.25
Tr 38 × 338336.50038.50034.50035.0000.25
Tr 38 × 738734.50039.00030.00031.0000.5
Tr 40 × 340338.50040.50036.50037.0000.25
Tr 40 × 740736.50041.00032.00033.0000.5
Tr 42 × 342340.50042.50038.50039.0000.25
Tr 42 × 742738.50043.00034.00035.0000.5
Tr 44 × 344342.50044.50040.50041.0000.25
Tr 44 × 744740.50045.00036.00037.0000.5
Tr 46 × 346344.50046.50042.50043.0000.25
Tr 46 × 846842.00047.00037.00038.0000.5
Tr 48 × 348346.50048.50044.50045.0000.25
Tr 48 × 848844.00049.00039.00040.0000.5
Tr 50 × 350348.50050.50046.50047.0000.25
Tr 50 × 850846.00051.00041.00042.0000.5
Tr 52 × 352350.50052.50048.50049.0000.25
Tr 52 × 852848.00053.00043.00044.0000.5
Tr 55 × 455453.00055.50050.50051.0000.25
Tr 55 × 955950.50056.00045.00046.0000.5
Tr 60 × 360358.50060.50056.50057.0000.25
Tr 60 × 960955.50061.00050.00051.0000.5
Tr 65 × 465463.00065.50060.50061.0000.25
Tr 65 × 10651060.00066.00054.00055.0000.5
Tr 70 × 470468.00070.50065.50066.0000.25
Tr 70 × 10701065.00071.00059.00060.0000.5
Tr 75 × 475473.00075.50070.50071.0000.25
Tr 75 × 10751070.00076.00064.00065.0000.5
Tr 80 × 480478.00080.50075.50076.0000.25
Tr 80 × 10801075.00081.00069.00070.0000.5
Tr 85 × 485483.00085.50080.50081.0000.25
Tr 85 × 12851279.00086.00072.00073.0000.5
Tr 90 × 490488.00090.50085.50086.0000.25
Tr 90 × 12901284.00091.00077.00078.0000.5
Tr 95 × 495493.00095.50090.50091.0000.25
Tr 95 × 12951289.00096.00082.00083.0000.5
Tr 100 × 4100498.000100.50095.50096.0000.25
Tr 100 × 121001294.000101.00087.00088.0000.5
Trapezoidal screw assembly attributes per nominal diameter (D s 10 - 100) - bare symbols as printed on the collected pageAll dimensions in millimetres. The collected page prints this grid under bare symbols (D s, P, E, h e, a, b, K s, h s, D n, K n, h n) without legends; they are carried verbatim and not re-attributed beyond what the values themselves support. One value-match note: E equals the pitch diameter d 2 = D 2 of the ISO 2904 ladder at every shared size (E 8.5 at D s 10 P 3; E 34.5 at D s 38 P 7; E 94 at D s 100 P 12), and a reproduces the crest-clearance ladder (0.25 through D s 48, 0.75 from D s 55). The remaining symbols are not legended on the page - read them against your drawing, confirm per RFQ.
D sPEh eabK sh sD nK nh n
Dimensions in mm
1038.51.250.250.56.51.7510.57.51.5
12310.51.250.250.58.51.7512.59.51.5
144121.750.250.59.52.2514.510.52
164141.750.250.511.52.2516.512.52
184161.750.250.513.52.2518.514.52
204181.750.250.515.52.2520.516.52
22519.520.250.7516.52.2522.5182
24521.520.250.7518.52.2524.5202.25
26523.520.250.7520.52.2526.5222.25
28525.520.250.7522.52.2528.5242.25
306272.50.250.7523.53.2530.5252.75
326292.50.250.7525.53.2532.5272.75
366332.50.250.7529.53.2536.5312.75
40736.530.250.7532.53.7540.5343.25
44740.530.250.7536.53.7544.5383.25
488443.50.250.7539.54.2548.5413.75
508463.50.250.7541.54.2550.5433.75
528483.50.250.7543.54.2552.5453.75
55950.540.250.7545.54.7555.5474.25
60955.540.250.7550.54.7560.5524.25
6510604.50.250.7554.55.2565.5564.75
7010654.50.250.7559.55.2570.5614.75
7510704.50.250.7564.55.2575.5664.75
8010754.50.250.7569.55.2580.5714.75
8512795.50.250.7572.56.2585.5745.75
9012845.50.250.7577.56.2590.5795.75
9512895.50.250.7582.56.2595.5845.75
10012945.50.250.7587.56.25100.5895.75
  • Row 1 (Dimensions in mm): the source's own unit-banner row - 'Dimensions in mm' spanning the grid - is carried as printed with its blank cells

Materials

  • Material and tolerance class specified per RFQ — lead screws commonly run medium-carbon or alloy steel with the flank profile thread-milled or rolled, against bronze or polymer nuts for wear; stainless for corrosive or food-washdown duty. State the axial load, travel per revolution and duty cycle at quotation, since pitch choice (the collected ladder offers two pitches on most diameters) is a wear-and-speed decision, not a stocking one

Ordering & documentation

Documents

Shipments of ISO 2904 Metric Trapezoidal Screw Threads are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 2904 Metric Trapezoidal Screw Threads orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 2904 Metric Trapezoidal Screw Threads), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ISO 2904 Metric Trapezoidal Screw Threads: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for iso 2904 metric trapezoidal screw threads is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for iso 2904 metric trapezoidal screw threads; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 2904 metric trapezoidal screw threads run 3–7 days. High-strength and custom parts for iso 2904 metric trapezoidal screw threads run 15–25 days. Quantities or variants of iso 2904 metric trapezoidal screw threads outside the standard range are confirmed at quotation.

Storage & shipping

ISO 2904 Metric Trapezoidal Screw Threads are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 2904 metric trapezoidal screw threads dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

ISO 2904 trapezoidal threads or the DIN 103 trapezoidal line on this site — which designation do I order?

Order by the standard your drawing names — they are different designations, not duplicates. The DIN 103 pages here tabulate the rod and its mating hex and round nuts from Tr 10 to Tr 60 with a pitch-per-size table; this ISO 2904 page carries the full ISO designation ladder, Tr 8 × 1.5 to Tr 100 × 12, with the complete basic geometry per designation (pitch diameter d 2 = D 2, minors d 3 and D 1, internal major D 4, crest clearance a c). The ISO ladder extends both finer (Tr 8, Tr 9) and much coarser (Tr 85 × 12, Tr 90 × 12, Tr 95 × 12, Tr 100 × 12) than the collected DIN 103 pitch table. If the drawing just says "Tr thread", match the diameter and pitch from the table — e.g. Tr 40 × 7 — and confirm the tolerance class per RFQ: the ISO tolerance system is ISO 2903, and the class is chosen on the fit the application needs (tight for position-holding screws, freer for fast-traversing drives).

What do the symbols d 2, D 4, d 3, D 1 and a c mean when reading the dimension table?

They are the ISO trapezoidal design-profile diameters, carried verbatim from the collected page. d 2 = D 2 is the pitch diameter — identical for screw and nut, and the reference for thread-fit measurement. d 3 is the external (screw) minor diameter of the design profile; D 1 is the internal (nut) minor diameter; D 4 is the internal major diameter, set larger than d so the crests never bind. a c is the crest clearance that creates that gap — 0.15 mm at the 1.5 mm pitches, 0.25 mm through P 6, and 0.5 mm from P 7 up. Worked example from the table: Tr 40 × 7 has d 40, d 2 = D 2 = 36.5, D 4 = 41.0, d 3 = 32.0, D 1 = 33.0, a c 0.5 — the screw's working depth sits between d 3 and d 2, and the nut's between D 1 and D 2, with the clearance keeping the flanks, not the crests, in contact. These are basic-profile values: actual manufacture applies a tolerance class per ISO 2903, which is quoted per RFQ.

What is the MOQ and lead time for ISO 2904 Metric Trapezoidal Screw Threads?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 2904 Metric Trapezoidal Screw Threads state?

State the full designation (ISO 2904), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 2904 Metric Trapezoidal Screw Threads inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your ISO 2904 Metric Trapezoidal Screw Threads
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.