Tension Control (TC) Bolts — F3125 F1852

Twist-off tension control bolts per ASTM F3125 Grade F1852 — the A325 strength level (120,000 psi minimum tensile) in a splined-tip assembly that shears at the design tension. F2280 is the A490-level counterpart at 150,000 psi. The standard high-volume structural bolt of US steel construction.

Last updated: 2026-11

Request a Quote

Tension Control (TC) Bolts — F3125 F1852 in an industrial setting
Illustrative image redrawn from real Tension Control (TC) Bolts — F3125 F1852 product references — not a photograph of stocked items.

Specifications

A tension control bolt builds the tension indicator into the fastener itself. The end of the bolt carries a splined tip beyond the threads, separated by an annular groove; a dedicated shear wrench grips the spline and the nut and turns them against each other, and when the bolt reaches the design tension the spline shears off — the broken spline is the installation signal, and the inspector confirms it visually joint by joint. F1852 carries the A325 strength level (120,000 psi minimum tensile) and F2280 the A490 level (150,000 psi); both are now grades under ASTM F3125. TC bolts are the predominant bolt type in US structural steel construction because they remove torque measurement from the crew entirely — but they depend on as-supplied lubrication, so weathered lots are re-verified on a tension calibrator before installation, per RCSC practice.

Standard ASTM F3125 Grade F1852 (A325 strength level); Grade F2280 at the A490 level — twist-off tension control
Tensile strength, min 120,000 psi (F1852, A325 level); 150,000 psi (F2280, A490 level)
Head and spline Splined tip beyond the threads, separated by an annular groove; spline shears at design tension
Size range Inch series 1/2"–1-1/2"; dimension chart collected for 5/8"–1-1/8"
Dimensions at 3/4" Bearing surface dia 1.338 in; head height 0.455–0.483 in; spline length 0.65 in; spline dia (ref) 0.53 in
Installation Dedicated electric or pneumatic shear wrench — no torque measurement; sheared spline is the acceptance signal
Inspection Visual: spline gone and nut not spinning; pre-installation verification on a tension calibrator per RCSC
Typical applications US structural steel construction, heavy construction, high-volume installation with guaranteed tension

Materials

  • Medium carbon steel, quenched and tempered (F1852, A325 strength level)
  • Alloy steel (F2280, A490 strength level)

Ordering & documentation

Documents

Shipments of Tension Control (TC) Bolts — F3125 F1852 are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Tension Control (TC) Bolts — F3125 F1852 orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Tension Control (TC) Bolts — F3125 F1852), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for Tension Control (TC) Bolts — F3125 F1852: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for tension control (tc) bolts — f3125 f1852 is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for tension control (tc) bolts — f3125 f1852; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for tension control (tc) bolts — f3125 f1852 run 3–7 days. High-strength and custom parts for tension control (tc) bolts — f3125 f1852 run 15–25 days. Quantities or variants of tension control (tc) bolts — f3125 f1852 outside the standard range are confirmed at quotation.

Storage & shipping

Tension Control (TC) Bolts — F3125 F1852 are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store tension control (tc) bolts — f3125 f1852 dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How does a TC bolt guarantee installed tension?

The groove between the splined tip and the threads is dimensioned so the torque needed to shear the spline corresponds to the bolt's design tension. The shear wrench turns the nut against the spline until the groove fails — at that moment the bolt has developed its tension, regardless of the torque the friction conditions consumed getting there. The crew never measures torque, and the inspector checks the joint visually: spline gone, nut not spinning free. The catch is lubrication — the shear torque depends on the as-supplied lubrication, so RCSC practice requires pre-installation verification on a tension calibrator, and lots that sat outside or rusted are re-verified or rejected.

Is a TC bolt as strong as a regular A325 bolt?

Yes at the F1852 grade: it carries the A325 strength level — 120,000 psi minimum tensile — in a twist-off assembly. The A490-strength counterpart is F2280 at 150,000 psi. Both used to be standalone ASTM specifications and are now grades under the unified F3125 structural bolt specification. What differs from a heavy hex A325 is the head geometry and the installation method, not the strength: TC assemblies are chosen for installation speed and guaranteed tension, and structural specifications accept them alongside conventional A325/A490 heavy hex bolts.

What is the MOQ and lead time for this bolt type?

The minimum order quantity for Tension Control (TC) Bolts — F3125 F1852 is 1,000–10,000 pieces depending on size. Stock items of Tension Control (TC) Bolts — F3125 F1852 ship in 3–7 days; high-strength and custom parts in 15–25 days. Common diameters of Tension Control (TC) Bolts — F3125 F1852 are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for TC bolts state?

State the standard and grade (ASTM F3125 Grade F1852 at the A325 strength level, or F2280 at the A490 level), diameter and length, nut and washer requirements, finish (plain, mechanically galvanized, or weathering-steel type), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Tension Control (TC) Bolts — F3125 F1852 inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your Tension Control (TC) Bolts — F3125 F1852
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.