ASTM A193 Grade B8M Stud Bolts

Stud bolts and threaded rod in ASTM A193 Grade B8M — AISI 316 molybdenum-alloyed austenitic stainless, 75 ksi minimum tensile with no diameter restrictions, Brinell hardness max 96 in the collected grade chart. The chloride-resistant stud grade for chemical, offshore and coastal piping, paired with A194 8M nuts.

Last updated: 2026-11

Request a Quote

ASTM A193 Grade B8M Stud Bolts in an industrial setting
Illustrative image redrawn from real ASTM A193 Grade B8M Stud Bolts product references — not a photograph of stocked items.

Specifications

B8M is the 316-family member of the A193 stud grades: the same austenitic stainless construction as B8 with 2–3% molybdenum added to the alloy, which is what lifts pitting and crevice resistance in chloride-bearing service. The collected grade chart lists it identically to B8 in the strength columns — 75 ksi minimum tensile, no diameter restrictions, Brinell max 96 — so the selection between the two is made by the medium, not the mechanicals: chlorides, coastal atmosphere, or process streams with pitting risk specify B8M, clean dry service can stay with B8. Like all annealed A193 stainless studs it trades strength for toughness and corrosion resistance, clamping with A194 8M heavy hex nuts; where the joint needs more yield than the annealed grade gives, the strain-hardened B8M classes (see the B8M3 page) are the structured way up without leaving the 316 metallurgy.

Standard ASTM A193 Grade B8M (material; also listed under A320 low-temperature use in the collected chart); stud dimensions per ASME B18.31.2
Material AISI 316 molybdenum-alloyed austenitic stainless steel (UNS S31600 material family)
Tensile strength, min 75 ksi — no diameter restrictions in the collected chart ("all included, no restrictions")
Hardness Brinell max 96 (collected chart; no hardness minimum listed for this grade)
Alloy difference vs B8 Molybdenum addition (2–3% in the 316 chemistry) for chloride pitting and crevice resistance — same 75 ksi chart strength
Nut pairing ASTM A194 Grade 8M nuts (the 316 pairing)
Sour-service condition NACE MR0175 restricts austenitic stainless hardness to 22 HRC (approx. 99 HRB) to prevent sulfide stress cracking — in the fully annealed Class 1 / Class 1A condition B8M is the strict-NACE-compliant 316 stud grade; state the sour-service requirement explicitly on the RFQ (per the collected B8M3 datasheet FAQ)
Chemistry C 0.08% max, Cr 16.0–18.0%, Ni 10.0–14.0%, Mo 2.00–3.00% — the collected datasheet calls the chemical foundation identical to B8M3: same chemistry, the grades diverge on heat-treatment condition, not composition
Typical applications Chemical process piping, offshore and coastal installations, chloride-bearing or pitting-prone service
Collected specification records
Grade Field Recorded value
ASTM A193/A320 B8M Nominal size range all sizes (source cell: “All Included No Restrictions”)
ASTM A193/A320 B8M Strength grade ASTM A193/A320 Grade B8M — tensile min 75 ksi; hardness max B96; all sizes

Industry reference — figures as printed in the collected technical tables; availability confirmed per quotation.

Materials

  • AISI 316 molybdenum-alloyed austenitic stainless steel

B8M is the AISI 316 counterpart of B8 — 75 ksi minimum tensile with no size restrictions.

As with B8, the higher classes are strain-hardened rather than heat-treated, so the class number must appear on the order and on the certificate you check against it.

Ordering & documentation

Documents

Shipments of ASTM A193 Grade B8M Stud Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASTM A193 Grade B8M Stud Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASTM A193 Grade B8M Stud Bolts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASTM A193 Grade B8M Stud Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for astm a193 grade b8m stud bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for astm a193 grade b8m stud bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for astm a193 grade b8m stud bolts run 3–7 days. High-strength and custom parts for astm a193 grade b8m stud bolts run 15–25 days. Quantities or variants of astm a193 grade b8m stud bolts outside the standard range are confirmed at quotation.

Storage & shipping

ASTM A193 Grade B8M Stud Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store astm a193 grade b8m stud bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

B8 or B8M — how much chloride exposure justifies the molybdenum upgrade?

Treat it as a medium question, not a strength question — the collected chart lists both grades at the same 75 ksi minimum tensile. Any repeated chloride contact (seawater splash, de-icing salt, brine streams, coastal fog) is the regime where plain 304 develops pitting and crevice attack and the 316 molybdenum addition earns its price. For internals of dry, clean service there is no mechanical reason to pay for B8M. And where a B8M joint is strength-limited rather than corrosion-limited, the strain-hardened Class 1/2/2B/2C sub-grades recover yield within the same 316 metallurgy — that is the B8M3 selection, covered on its own page.

When is annealed B8M the right grade instead of B8M3?

When the joint must meet NACE MR0175: the collected datasheet notes the sour-service standard restricts austenitic stainless hardness to 22 HRC to prevent sulfide stress cracking, which excludes strain-hardened B8M3 (up to 35 HRC) and makes fully annealed B8M Class 1 / Class 1A the strict-compliance choice. State the sour-service requirement explicitly on the RFQ.

What is the MOQ and lead time for ASTM A193 Grade B8M Stud Bolts?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ASTM A193 Grade B8M Stud Bolts state?

State the full designation (ASTM A193 Grade B8M (material), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASTM A193 Grade B8M Stud Bolts inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your ASTM A193 Grade B8M Stud Bolts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.