GB/T 15389-2025 Threaded Rod
Threaded rod to China's current national standard GB/T 15389-2025 — coarse threads M2–M68 and fine threads M8×1–M72×6, carbon steel classes 8.8/10.9/12.9, nine stainless performance grades from A2-50 to D6-80, 6g thread tolerance, with 2025-revision passivation, zinc-flake and hot-dip galvanizing requirements. Effective February 1, 2026.
Last updated: 2026-11
Specifications
GB/T 15389-2025 is the revised Chinese national standard for threaded rod, issued October 2025 and effective February 1, 2026, superseding the 1994 version that had non-equivalently adopted DIN 975:1986. The 2025 revision widens the size envelope well beyond the DIN range — coarse threads to M68 and fine threads to M72×6 — adds carbon steel classes 8.8/10.9/12.9 alongside nine stainless performance grades (A2-50 up to D6-80), and writes surface-treatment requirements into the standard: passivation for stainless rods, non-electrolytic zinc flake or hot-dip galvanizing for steel, plus marking and labelling rules. For China-market procurement and power-plant construction it is the document to specify; rods from compliant mills often meet DIN 976-1 requirements simultaneously.
| Standard | GB/T 15389-2025 (Chinese national standard, effective Feb 1, 2026; supersedes GB/T 15389-1994) |
|---|---|
| Thread size range | Coarse threads M2–M68; fine threads M8×1 – M72×6 |
| Thread tolerance | Metric coarse thread, 6g |
| Carbon steel classes | 8.8, 10.9, 12.9 (added in the 2025 revision) |
| Stainless grades | A2, A4, D4, D6 |
| Stainless performance grades | A2-50, A2-70, A4-50, A4-70, A4-80, D4-70, D4-80, D6-70, D6-80 (A4-80 ≥ 800 MPa) |
| Surface treatment | Passivation required for stainless; zinc flake or hot-dip galvanizing specified for steel |
| Marking | Marking and labelling requirements added in the 2025 revision |
| Typical applications | Construction, equipment installation, power plant construction |
Materials
- Carbon steel (classes 8.8–12.9)
- A2 stainless steel
- A4 stainless steel
- D4 / D6 stainless steel
Ordering & documentation
Documents
Shipments of GB/T 15389-2025 Threaded Rod are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for GB/T 15389-2025 Threaded Rod orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (GB/T 15389-2025 Threaded Rod), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for GB/T 15389-2025 Threaded Rod: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for gb/t 15389-2025 threaded rod is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for gb/t 15389-2025 threaded rod; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for gb/t 15389-2025 threaded rod run 3–7 days. High-strength and custom parts for gb/t 15389-2025 threaded rod run 15–25 days. Quantities or variants of gb/t 15389-2025 threaded rod outside the standard range are confirmed at quotation.
Storage & shipping
GB/T 15389-2025 Threaded Rod are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store gb/t 15389-2025 threaded rod dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Can GB/T 15389 threaded rod be interchanged with DIN 975 / DIN 976 rod?
In many everyday applications yes — the 1994 edition was adopted from DIN 975:1986, so corresponding sizes and grades share a common origin and many mills produce rod compliant with both. But interchangeability has limits: GB/T 15389-2025 extends to M68 coarse / M72×6 fine (beyond DIN's M64), offers stainless performance grades DIN does not list (up to A4-80), and now writes passivation and coating requirements into the standard. For critical or code-governed joints, specify the standard the design references rather than assuming equivalence.
What changed in the 2025 revision of GB/T 15389?
Four things a buyer will notice: carbon steel property classes 8.8/10.9/12.9 were added alongside the stainless grades; rods with chamfered ends on both sides were added; surface treatment became a standard requirement (passivation for stainless, zinc flake or hot-dip galvanizing for steel) instead of manufacturer discretion; and marking/labelling requirements were introduced. The size envelope also grew to M2–M68 coarse and M8×1–M72×6 fine, with an expanded length series and theoretical mass tables.
What is the MOQ and lead time for GB/T 15389-2025 Threaded Rod?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for GB/T 15389-2025 Threaded Rod state?
State the full designation (GB/T 15389), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
- Threaded Rod and Stud Bolt Standards: Mapping DIN 975/976 and ASTM A193/A320 to Grades, Coatings and Certification
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your GB/T 15389-2025 Threaded Rod inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your GB/T 15389-2025 Threaded Rod
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support