DIN 525 Studs for Welding
Metric studs for welding to DIN 525 — plain-weldable studs M6 to M48 with the source's length ladder (nominal/min/max per size, 130 → 390 mm), the +2P,0 length tolerance band and the collected kg/1000 weight column.
Last updated: 2026-11
Specifications
DIN 525 covers the plain metric stud for welding: a unthreaded weld-penetration tip gets welded into the workpiece (typically drawn-arc or capacitor-discharge welding), then the thread carries the fixture. The collected ladder runs M6 to M48, and unlike the screw-mate studs the length is a fixed ladder per size — 130 mm at M6 stepping to 390 mm at M48 — with min/max tolerances tabulated (±2 mm at the small end, ±2.9 mm at the large end). The b row carries the source's "+2P,0" length-tolerance band on the unthreaded weld end, and the kg/1000 column (26 kg at M6 up to 5,110 kg at M48) matters when the job is crates of anchors for a shop floor. Weld consumable side, gun settings and ceramic ferrule pairing are process selections — not tabulated by the collected specification — so name the welding process and base material on the RFQ. Stud material and mechanical properties are likewise not printed by the source — per RFQ.
| Standard | DIN 525 — studs for welding |
|---|---|
| Size range | M6 – M48, eleven sizes in the collected ladder |
| Stud lengths | L 130 – 390 mm nominal per the source ladder (min/max tabulated per size) |
| Length tolerance | b end: +2P,0 band as printed; L min/max per size (±2 to ±2.9 mm across the range) |
| Stud diameter | d s: max = nominal size (6 – 48 mm) |
| Weight | per 1000 units ≈ kg column carried verbatim from the source (26 → 5110) |
| Weld process / ferrule | Not tabulated by the collected specification — per RFQ (name the process and base material) |
| Material / properties | Not tabulated by the collected specification — per RFQ |
| Attribute | M6 | M8 | M10 |
|---|---|---|---|
| P — Pitch | 1 | 1.25 | 1.5 |
| b — +2P,0 | 35 | 40 | 45 |
| d s — max=nominal size | 6 | 8 | 10 |
| L — Nominal Size | 130 | 140 | 150 |
| L — min | 128 | 138 | 148 |
| L — max | 132 | 142 | 152 |
| per 1000 units ≈ kg | 26 | 49.2 | 83.5 |
- Row 2 (b — +2P,0): The b-row label "+2P,0" (length tolerance band) is carried verbatim including the fullwidth comma as printed by the source.
| Attribute | M12 | M16 | M20 |
|---|---|---|---|
| P — Pitch | 1.75 | 2 | 2.5 |
| b — +2P,0 | 55 | 65 | 75 |
| d s — max=nominal size | 12 | 16 | 20 |
| L — Nominal Size | 170 | 190 | 210 |
| L — min | 168 | 187.7 | 207.7 |
| L — max | 172 | 192.3 | 212.3 |
| per 1000 units ≈ kg | 135 | 273 | 473 |
| Attribute | M24 | M30 | M36 |
|---|---|---|---|
| P — Pitch | 3 | 3.5 | 4 |
| b — +2P,0 | 85 | 105 | 125 |
| d s — max=nominal size | 24 | 30 | 36 |
| L — Nominal Size | 230 | 270 | 310 |
| L — min | 227.7 | 267.4 | 307.4 |
| L — max | 232.3 | 272.6 | 312.6 |
| per 1000 units ≈ kg | 745 | 1370 | 2280 |
| Attribute | M42 | M48 |
|---|---|---|
| P — Pitch | 4.5 | 5 |
| b — +2P,0 | 145 | 165 |
| d s — max=nominal size | 42 | 48 |
| L — Nominal Size | 350 | 390 |
| L — min | 347.1 | 387.1 |
| L — max | 352.9 | 392.9 |
| per 1000 units ≈ kg | 3510 | 5110 |
Materials
- Weldable stud steel specified per RFQ — welding studs are produced in weldable carbon steels matched to the base material and process; state the base plate grade and welding method at quotation
Ordering & documentation
Documents
Shipments of DIN 525 Studs for Welding are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 525 Studs for Welding orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 525 Studs for Welding), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 525 Studs for Welding: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 525 studs for welding is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 525 studs for welding; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 525 studs for welding run 3–7 days. High-strength and custom parts for din 525 studs for welding run 15–25 days. Quantities or variants of din 525 studs for welding outside the standard range are confirmed at quotation.
Storage & shipping
DIN 525 Studs for Welding are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 525 studs for welding dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
The DIN 525 table lists one length per size — can I get other lengths?
The collected source tabulates a single nominal length ladder per thread size (130 mm at M6 through 390 mm at M48) with its min/max tolerances, so treat those as the designation's standard lengths. Other lengths are a manufacturing question, not a table question: because the thread runs over the usable stud, a different length changes weld-behaviour targets and is quoted per drawing rather than read off the ladder. Put the exact diameter × length callout on the RFQ and the process-side details (weld method, ferrule, base material) alongside it.
What is the MOQ and lead time for DIN 525 Studs for Welding?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 525 Studs for Welding state?
State the full designation (DIN 525), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 525 Studs for Welding inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your DIN 525 Studs for Welding
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support