ASTM F3125 Grade A325 Type 1 Structural Bolts
Heavy hex structural bolts per ASTM F3125 Grade A325 Type 1 — medium carbon steel, quenched and tempered, 120,000 psi minimum tensile across all sizes 1/2"–1-1/2". The standard structural bolt for bridges, buildings and heavy construction, and the A325 type that accepts hot-dip galvanizing.
Last updated: 2026-11
Specifications
Type 1 is the default A325: a heavy hex structural bolt made of medium carbon steel (the type also covers carbon-boron and medium-carbon alloy steel), with a flat washer-faced bearing surface and a chamfered point. Heat treatment is a quench from above the austenitizing temperature followed by tempering at 800 °F or more. Under F3125 the mechanical minimums apply across the full 1/2"–1-1/2" range — 120,000 psi minimum tensile and 92,000 psi minimum yield at every size — because the consolidation raised the former reduced requirements for diameters over 1 inch to the same values as the smaller sizes. One practical distinction drives type selection: Type 1 is the A325 type that can be galvanized, so coated structural work (bridges, highway structures) specifies Type 1 with a compatible nut and washer set, while uncoated weathering-steel joints go to Type 3.
| Standard | ASTM F3125 Grade A325 Type 1 — heavy hex structural bolt, washer faced, chamfered point |
|---|---|
| Material | Medium carbon steel (type also covers carbon-boron and medium-carbon alloy steel) |
| Tensile strength, min | 120,000 psi (all sizes 1/2"–1-1/2") |
| Yield strength, min | 92,000 psi (all sizes 1/2"–1-1/2") |
| Proof load | 85,000 psi (all sizes 1/2"–1-1/2") |
| Hardness | Rockwell C25–34 (all sizes; Brinell 253–319) |
| Heat treatment | Quenched in a liquid medium from above the austenitizing temperature, tempered ≥ 800 °F |
| Finishes | Plain, zinc plate, or hot-dip galvanized — Type 1 is the A325 type that can be galvanized |
| Typical applications | Structural steel joints in bridges, highway construction and heavy construction |
| Grade | Field | Recorded value |
|---|---|---|
| ASTM F3125 A325 Type 1 | Nominal size range | 1/2 in to 1 in |
| ASTM F3125 A325 Type 1 | Strength grade | ASTM F3125 Grade A325 Type 1 — proof load min 85 ksi; tensile min 120 ksi; hardness C25–C34; size range 1/2 in to 1 in |
Industry reference — figures as printed in the collected technical tables; availability confirmed per quotation.
Where this grade fits
A325 structural bolts are pre-tensioned, so the tightening method is part of the specification: turn-of-nut, calibrated wrench, TC bolts or DTI washers per RCSC practice, each with its own verification discipline. Type 1 is the A325 type that accepts hot-dip galvanizing — pair it with a compatible coated heavy hex nut (A563 DH or A194 2H).
Deep read: How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint · Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
Materials
- Medium carbon steel (quenched and tempered)
Type 1 is medium carbon steel in plain finish.
Unlike Type 3, rust on a Type 1 bolt is not protective — it relies on coatings (mechanical zinc or hot-dip where the grade permits) and dry jobsite storage to reach its service life.
Ordering & documentation
Documents
Shipments of ASTM F3125 Grade A325 Type 1 Structural Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASTM F3125 Grade A325 Type 1 Structural Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ASTM F3125 Grade A325 Type 1 Structural Bolts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ASTM F3125 Grade A325 Type 1 Structural Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for astm f3125 grade a325 type 1 structural bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for astm f3125 grade a325 type 1 structural bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for astm f3125 grade a325 type 1 structural bolts run 3–7 days. High-strength and custom parts for astm f3125 grade a325 type 1 structural bolts run 15–25 days. Quantities or variants of astm f3125 grade a325 type 1 structural bolts outside the standard range are confirmed at quotation.
Storage & shipping
ASTM F3125 Grade A325 Type 1 Structural Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store astm f3125 grade a325 type 1 structural bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When is A325 Type 1 specified instead of Type 3?
By coating and environment. Type 1 is the medium-carbon-steel type and the only A325 type that can be hot-dip galvanized, so any coated structural joint — and most painted work — calls out Type 1 with galvanized heavy hex nuts and F436 washers. Type 3 is the weathering-steel type for uncoated joints that form their own patina. If the structure is weathering steel (ASTM A588), the joint normally takes Type 3; if it is ordinary structural steel with a coating system, Type 1.
What is the MOQ and lead time for this bolt grade?
The minimum order quantity for ASTM F3125 Grade A325 Type 1 Structural Bolts is 1,000–10,000 pieces depending on size. Stock items of ASTM F3125 Grade A325 Type 1 Structural Bolts ship in 3–7 days; high-strength and custom parts in 15–25 days. Common diameters of ASTM F3125 Grade A325 Type 1 Structural Bolts are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this bolt grade state?
For ASTM F3125 Grade A325 Type 1 Structural Bolts, state the standard and grade (for example ISO 4017 Class 8.8 or ASTM F3125 Grade A325 Type 1), diameter and length, thread type (metric coarse or UNC/UNF), finish (plain, zinc, or hot-dip galvanized where the grade permits), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
- Bolt Head Markings: What the Lines, Numbers and Letters Claim — and How to Verify the Grade Before Accepting a Lot
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ASTM F3125 Grade A325 Type 1 Structural Bolts inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your ASTM F3125 Grade A325 Type 1 Structural Bolts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support