EN 14399-4 Hex Bolts with Large Head (System HV)

EN 14399-4 hexagon bolts with large head for high-strength structural bolting, System HV, M12–M36 — the collected per-size tables: pitch, reference thread length b, d s, e, k, s and r, with the DAST-directive footnote.

Last updated: 2026-11

Request a Quote

EN 14399-4 Hex Bolts with Large Head (System HV) in an industrial setting
Illustrative image redrawn from real EN 14399-4 Hex Bolts with Large Head (System HV) product references — not a photograph of stocked items.

Specifications

EN 14399-4 is the European structural bolting standard for the HV system: a heavy hexagon head bolt tightened to a controlled preload in steel-to-steel joints, paired with EN 14399 HV nuts and washers and assembled under the DAST directive the collected page cites. The "large head" is the point — a wider, taller hex than the ISO 4014 general-purpose bolt, giving the bearing area and wrenching stability that high-preload field splicing needs. The collected tables run M12 to M36: per size the pitch, the reference thread length b, shank d s with max/min, across-corners e, head height k with tolerance, across-flats s (max=nominal, with min), and the fillet r. The collected page notes the standard replaces DIN 6914 — see the DIN 6914 page in this family for its step-line thread-length presentation. Property classes (HV system pairs 10.9 bolts with class 10 nuts) and finishes are not printed by the collected specification and stay per RFQ; for a structural delivery, state the assembly class (HV), the Slip factor / coating requirements and any CE/EN 15048 or project-specific certification at quotation.

Standard EN 14399-4 — hexagon bolts with large head for high-strength structural bolting, System HV; the collected page notes it replaces DIN 6914; head and bearing dimensions acc. to DAST directive (source footnote)
Series M12 – M36 (two source column groups: M12/M16/M20/M22 and M24/M27/M30/M36)
Tabulated geometry Per size: pitch P, reference thread length b, d s (max/min), e (min), k (nominal/max/min), s (max/max=min as printed, min), r (min) — s max 22–60, k nominal 8–23, e min 23.91–66.44
System pairing System HV bolts pair with EN 14399 HV nuts and washers and a calibrated tightening procedure (DAST directive, per the source footnote); k-class/d-class fit and lubrication are confirmed per order
Property classes / finishes Not tabulated by the collected specification — per RFQ (state class, coating and any CE/documentation requirement explicitly)
EN 14399-4 hex bolts with large head (System HV) - per-size dimensions (M12 - M22)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; b = reference thread length ('Ref.'); d s = shank diameter; e = width across corners; k = head height; s = width across flats; r = fillet radius. The collected page states EN 14399-4 replaces DIN 6914. Property classes, finishes and the k-class/d-class HV pairing are not tabulated by the collected specification.
AttributeM12M16M20M22
P — Pitch1.7522.52.5
b — Ref.23283334
d s — Nominal Size12162022
max12.716.720.8422.84
min11.315.319.1621.16
e — min23.9129.5635.0339.55
k — Nominal Size8101314
max8.4510.7513.914.9
min7.559.2512.113.1
s — max22273236
min21.1626.163135
r — min1.21.21.51.5
  • Row 2 (b — Ref.): b is printed as a single reference value ('Ref.') per size — the collected page does not tabulate the above/below step-line split its DIN 6914 counterpart prints.
  • The source prints '*acc. to DAST directive' as a page footnote — the head/washer bearing dimensions follow the DAST directive, kept verbatim.
EN 14399-4 hex bolts with large head (System HV) - per-size dimensions (M24 - M36)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; b = reference thread length ('Ref.'); d s = shank diameter; e = width across corners; k = head height; s = width across flats; r = fillet radius. The collected page states EN 14399-4 replaces DIN 6914. Property classes, finishes and the k-class/d-class HV pairing are not tabulated by the collected specification.
AttributeM24M27M30M36
P — Pitch333.54
b — Ref.39414452
d s — Nominal Size24273036
max24.8427.8430.8437
min23.1626.1629.1635
e — min45.250.8555.3766.44
k — Nominal Size15171923
max15.917.920.0524.05
min14.116.117.9521.95
s — max41465060
min40454958.8
r — min1.5222
  • The source prints '*acc. to DAST directive' as a page footnote — the head/washer bearing dimensions follow the DAST directive, kept verbatim.

Materials

  • Material, property class and finish specified per RFQ — structural deliveries typically pair a 10.9-class HV bolt with matching EN 14399 nut and washer sets; confirm at quotation

Ordering & documentation

Documents

Shipments of EN 14399-4 Hex Bolts with Large Head (System HV) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for EN 14399-4 Hex Bolts with Large Head (System HV) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (EN 14399-4 Hex Bolts with Large Head (System HV)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for EN 14399-4 Hex Bolts with Large Head (System HV): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for en 14399-4 hex bolts with large head (system hv) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for en 14399-4 hex bolts with large head (system hv); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for en 14399-4 hex bolts with large head (system hv) run 3–7 days. High-strength and custom parts for en 14399-4 hex bolts with large head (system hv) run 15–25 days. Quantities or variants of en 14399-4 hex bolts with large head (system hv) outside the standard range are confirmed at quotation.

Storage & shipping

EN 14399-4 Hex Bolts with Large Head (System HV) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store en 14399-4 hex bolts with large head (system hv) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

EN 14399-4 (HV) or HR — and why does the head matter on a structural joint?

The head matters because a structural bolt is a calibrated spring, not just a pin. HV assemblies are tightened to high preload, and the large head spreads that preload over more bearing area, resists head sinking into the washer, and gives the impact wrench a stable platform — which is why EN 14399-4 sizes the head above the general-purpose ISO series at the same thread (across-flats 22 at M12 versus 18 for ISO 4014, per the collected tables). HR (EN 14399-3) is the parallel heavy-hex system with different fit and acceptance rules; HV is the more common European spec where the DAST-directive tightening procedures apply. Order the assembly, not just the bolt: HV preload depends on the nut, the washers (a fitted washer under the head where the source prints the DAST note) and lubrication, so name the assembly class and any project acceptance tests (K-class testing, CE documentation) at RFQ.

What is the MOQ and lead time for this bolt type?

The minimum order quantity for EN 14399-4 Hex Bolts with Large Head (System HV) is 1,000–10,000 pieces depending on size. Stock items of EN 14399-4 Hex Bolts with Large Head (System HV) ship in 3–7 days; high-strength and custom parts in 15–25 days. Common sizes of EN 14399-4 Hex Bolts with Large Head (System HV) are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for EN 14399-4 Hex Bolts with Large Head (System HV)?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for EN 14399-4 Hex Bolts with Large Head (System HV) state?

State the full designation (EN 14399), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your EN 14399-4 Hex Bolts with Large Head (System HV) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your EN 14399-4 Hex Bolts with Large Head (System HV)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.