GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C

GB/T 5781-2025 fully threaded hexagon head bolts, product grade C, M5 to M64: pitch, runout, bearing face, across-flats and corners, head height and fillet ladders — the tolerance-loose general-construction full-thread bolt.

Last updated: 2026-11

Request a Quote

GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C in an industrial setting
Illustrative image redrawn from real GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C product references — not a photograph of stocked items.

Specifications

GB/T 5781 is the grade-C (rough tolerance) full-thread hex bolt — the construction-site bolt where holes are punched or drifted and the fastener geometry carries wider tolerances than the A/B grades. The collected 2025-edition table runs M5 to M64 across 24 sizes (non-preferred steps parenthesized as printed): pitch P from 0.8 at M5 to 6 at M64, thread runout a, bearing diameters dw and da, across-corners e min ladder (8.63 at M5 to 104.86 at M64 with the fine steps at the large end), head height k nominal 3.5 at M5 to 40 at M64 with min rows behind, fillet r, and across-flats s nominal 8 to 95 with its max/min ladder. A second corpus page carries the superseded GB/T 5781-2000 edition; this page renders the current 2025 edition and the 2000 file is pruned as same-identity-older-edition. Product grade C geometry pairs with the lower-tolerance end of the property-class ladder (typically 4.6-8.8 supply).

Standard / scope GB/T 5781-2025 hexagon head bolts, full thread, product grade C — M5 to M64, non-preferred sizes parenthesized as printed; 2025 edition (2000 edition pruned as older-edition duplicate)
Pitch P / runout a P 0.8 (M5) to 6 (M64); a max 2.4 (M5) to 18 (M64) with the min sub-row behind it
Width across flats s Nominal 8 (M5) to 95 (M64); min ladder 7.64 (M5) to 92.8 — max/min rows carried as printed
Width across corners e Min ladder 8.63 (M5) to 104.86 (M64) with "-" sub-rows where not tabulated
Head height k / k w k nominal 3.5 (M5) to 40 (M64), min 3.125 to 38.75; k w min 2.19 (M5) to 27.13 (M64); fillet r 0.2 to 2
Not tabulated Lengths, mechanical classes (grade C pairs with the coarse property classes), finishes — per RFQ
GB/T 5781-2025 hexagon head bolts, full thread, product grade C — by size M5-M64 (table 1 of 1)mm. Salvaged size-designation header rows (two segments, 12 + 12 columns) used as size column headers. Attribute-label table (2 columns) positionally paired with two numeric grids; values untouched.
AttributeSub-labelM5M6(M7)M8M10M12(M14)M16(M18)M20(M22)M24(M27)M30(M33)M36(M39)M42(M45)M48(M52)M56(M60)M64
PPitch0.8111.251.51.75222.52.52.5333.53.5444.54.5555.55.56
amax2.4333.754.55.25667.57.57.59910.510.5121213.513.5151516.516.518
a0.8111.251.51.75222.52.52.5333.53.5444.54.5555.55.56
cmax0.50.50.60.60.60.60.60.80.80.80.80.80.80.80.80.811111111
d amax67.28.210.212.214.716.718.721.224.426.428.432.435.438.442.445.448.652.656.662.6677175
d wmin7.068.749.4711.4714.4716.4719.152224.8527.731.3533.253842.7546.5551.1155.8659.9564.769.4574.278.6683.4188.16
emin8.6310.8911.9414.217.5919.8522.7826.1729.5632.9537.2939.5545.250.8555.3760.7966.4471.376.9582.688.2593.5699.21104.86
kNominal Size3.544.85.36.47.58.81011.512.514151718.72122.52526283033353840
k3.8754.3755.1755.6756.857.959.2510.7512.413.414.915.917.919.7522.0523.5526.0527.0529.0531.0534.2536.2539.2541.25
k3.1253.6254.4254.9255.957.058.359.2510.611.613.114.116.117.6519.8521.4523.9524.9526.9528.9531.7533.7536.7538.75
k wmin2.192.543.13.454.174.945.856.487.428.129.179.8711.2712.3613.9715.0216.7717.4718.8720.2722.2323.6325.7327.13
rmin0.20.250.250.40.40.60.60.60.60.80.80.8111111.21.21.61.6222
smax=nominal size81011131618212427303436414650556065707580859095
s7.649.6410.5712.5715.5717.5720.1623.1626.1629.16333540454953.858.863.168.173.178.182.887.892.8
  • Identity note: the acquisition filename reads ISO 7049 (tapping screws) but the page prints GB/T 5781-2025 (detail.php sid=MjYxMDg=); identity taken from the page title.
  • A second collected page in the same batch corpus carries GB/T 5781-2000 (the superseded edition, filename ifi-521); this page renders the 2025 edition only — the 2000 file is pruned as same-identity-older-edition.

Materials

  • Grade C geometry is the Give on tolerance, not on material: supply is typically 4.6/4.8 carbon steel, hot-dip galvanized or black, for steel structures, temporary works and anchor bolting where drilled-fit precision is not the point. If the joint needs repeatable preload or a tight hole fit, that is an A/B-grade (GB/T 5783 / ISO 4017-family) conversation — say which on the RFQ, because the head sizes overlap and only the tolerance class differs on the certificate

Ordering & documentation

Documents

Shipments of GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for gb/t 5781-2025 hexagon head bolts, full thread, product grade c is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for gb/t 5781-2025 hexagon head bolts, full thread, product grade c; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for gb/t 5781-2025 hexagon head bolts, full thread, product grade c run 3–7 days. High-strength and custom parts for gb/t 5781-2025 hexagon head bolts, full thread, product grade c run 15–25 days. Quantities or variants of gb/t 5781-2025 hexagon head bolts, full thread, product grade c outside the standard range are confirmed at quotation.

Storage & shipping

GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store gb/t 5781-2025 hexagon head bolts, full thread, product grade c dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What does "product grade C" actually change versus the A/B hex bolts?

Tolerance, not strength or thread. Grade C bolts carry wider head and shank tolerances — they are built for punched, drifted or oversize holes in steel structures where the bolt must go in fast, not center precisely. The table shows it in the geometry's max/min spread and the "-" cells where tight-grade sub-rows simply are not tabulated. You trade repeatability for cost and speed of assembly; the property class stamped on the head still governs strength. Specifying C where the drawing says A (or vice versa) is a fitment problem waiting for the site — quote the product grade as printed.

Why does this page carry the 2025 edition when the corpus also collected a 2000 table?

The batch partition found both editions in the corpus and treats them as one identity with two editions: the page renders the current GB/T 5781-2025 ladder, and the 2000-edition file is pruned as a same-identity-older-edition duplicate rather than built as a competing page. Edition deltas at these sizes are minor geometry-detail shifts, but if a legacy drawing or an old certificate cites the 2000 values, flag it on the RFQ — the standard designation on the order should match the edition the design was verified against.

What is the MOQ and lead time for GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C state?

State the full designation (GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your GB/T 5781-2025 Hexagon Head Bolts, Full Thread, Product Grade C
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.