DIN 938 Double-End Studs (Metal End ≈ 1 d)
Double-end metric studs to DIN 938 — the metal (screwed-in) end at approximately 1 × thread diameter, nut-end thread length tabulated by grip L through (M52), with the collected pitch/shank-diameter/thread-run-out ladder M3 to (M52).
Last updated: 2026-11
Specifications
DIN 938 is the shortest-engagement member of the classic double-end stud trio: the screwed-in end is sized at roughly one thread diameter — the tabulated b 1 row runs 3 mm at M3 up to 52 mm at (M52) — so it suits tapped holes in reasonably thick, sound material where a longer bite would bottom out or overload the thread. The nut end carries the standard engagement ladders by grip length (L≤125 / 125<L≤200 / L>200 rows), which is what the assembler reads when choosing the tapped-hole depth versus the nut thread run. The collected ladder spans M3 to (M52), with fine-thread pitch rows printed where the standard tabulates them and "-" where a size has no fine-thread or long-grip variant in the source. Pair the stud with a class-matched nut off this catalog's metric hex nut line and thread it into the tapping-size hole your drawing calls. Material, property class and finish are not printed by the collected specification — per RFQ (name the class and coating at quotation).
| Standard | DIN 938 — double-end studs, metal (screwed-in) end ≈ 1 d |
|---|---|
| Size range | M3 – (M52), parenthesised sizes non-preferred per the source notation |
| Screwed-in end | b 1: 3 – 52 mm across the ladder (≈ 1 × d) |
| Nut-end engagement | b by grip: L≤125 / 125<L≤200 / L>200 rows per size (12 → 129 mm) |
| Shank diameter | d s: min/max per size (e.g. M10: 9.78 – 10 mm) |
| Thread variants | Coarse pitch tabulated per size; fine-thread rows where the source tabulates them |
| Material / property class | Not tabulated by the collected specification — per RFQ |
| Attribute | M3 | M4 | M5 |
|---|---|---|---|
| P — Pitch — Coarse thread | 0.5 | 0.7 | 0.8 |
| P — Pitch — Fine thread-1 | - | - | - |
| P — Pitch — Fine thread-2 | - | - | - |
| b 1 | 3 | 4 | 5 |
| b — L≤125 | 12 | 14 | 16 |
| b — 125<L≤200 | 18 | 20 | 22 |
| b — L>200 | - | - | - |
| d s — max | 3 | 4 | 5 |
| d s — min | 2.86 | 3.82 | 4.82 |
| x 1 | 1.25 | 1.75 | 2 |
| x 2 | 0.7 | 0.7 | 0.9 |
- Row 7 (b — L>200): The source prints "-" (no tabulated value) for the L>200 nut-end engagement on M3-M5 — carried verbatim, not read across from larger sizes.
| Attribute | M6 | (M7) | M8 |
|---|---|---|---|
| P — Pitch — Coarse thread | 1 | 1 | 1.25 |
| P — Pitch — Fine thread-1 | - | - | 1 |
| P — Pitch — Fine thread-2 | - | - | - |
| b 1 | 6 | 7 | 8 |
| b — L≤125 | 18 | 20 | 22 |
| b — 125<L≤200 | 24 | 26 | 28 |
| b — L>200 | - | - | - |
| d s — max | 6 | 7 | 8 |
| d s — min | 5.82 | 6.78 | 7.78 |
| x 1 | 2.5 | 2.5 | 3.2 |
| x 2 | 1 | 1.25 | 1.6 |
| Attribute | M10 | M12 | (M14) |
|---|---|---|---|
| P — Pitch — Coarse thread | 1.5 | 1.75 | 2 |
| P — Pitch — Fine thread-1 | 1.25 | 1.25 | 1.5 |
| P — Pitch — Fine thread-2 | - | 1.5 | - |
| b 1 | 10 | 12 | 14 |
| b — L≤125 | 26 | 30 | 34 |
| b — 125<L≤200 | 32 | 36 | 40 |
| b — L>200 | 45 | 49 | 53 |
| d s — max | 10 | 12 | 14 |
| d s — min | 9.78 | 11.73 | 13.73 |
| x 1 | 3.8 | 4.3 | 5 |
| x 2 | 1.9 | 2.2 | 2.5 |
| Attribute | M16 | (M18) | M20 |
|---|---|---|---|
| P — Pitch — Coarse thread | 2 | 2.5 | 2.5 |
| P — Pitch — Fine thread-1 | 1.5 | 1.5 | 1.5 |
| P — Pitch — Fine thread-2 | - | - | - |
| b 1 | 16 | 18 | 20 |
| b — L≤125 | 38 | 42 | 46 |
| b — 125<L≤200 | 44 | 48 | 52 |
| b — L>200 | 57 | 61 | 65 |
| d s — max | 16 | 18 | 20 |
| d s — min | 15.73 | 17.73 | 19.67 |
| x 1 | 5 | 6.3 | 6.3 |
| x 2 | 2.5 | 3.2 | 3.2 |
| Attribute | (M22) | M24 | (M27) |
|---|---|---|---|
| P — Pitch — Coarse thread | 2.5 | 3 | 3 |
| P — Pitch — Fine thread-1 | 1.5 | 2 | 2 |
| P — Pitch — Fine thread-2 | - | - | - |
| b 1 | 22 | 24 | 25 |
| b — L≤125 | 50 | 54 | 60 |
| b — 125<L≤200 | 56 | 60 | 66 |
| b — L>200 | 69 | 73 | 79 |
| d s — max | 22 | 24 | 27 |
| d s — min | 21.67 | 23.67 | 26.67 |
| x 1 | 6.3 | 7.5 | 7.5 |
| x 2 | 3.2 | 3.8 | 3.8 |
| Attribute | M30 | (M33) | M36 |
|---|---|---|---|
| P — Pitch — Coarse thread | 3.5 | 3.5 | 4 |
| P — Pitch — Fine thread-1 | 2 | 2 | 3 |
| P — Pitch — Fine thread-2 | - | - | - |
| b 1 | 30 | 32 | 35 |
| b — L≤125 | 66 | 72 | 78 |
| b — 125<L≤200 | 72 | 78 | 84 |
| b — L>200 | 85 | 91 | 97 |
| d s — max | 30 | 33 | 36 |
| d s — min | 29.67 | 32.61 | 35.61 |
| x 1 | 9 | 9 | 10 |
| x 2 | 4.5 | 4.5 | 5 |
| Attribute | (M39) | M42 | (M45) |
|---|---|---|---|
| P — Pitch — Coarse thread | 4 | 4.5 | 4.5 |
| P — Pitch — Fine thread-1 | 3 | 3 | 3 |
| P — Pitch — Fine thread-2 | - | - | - |
| b 1 | 38 | 42 | 45 |
| b — L≤125 | 84 | 90 | 96 |
| b — 125<L≤200 | 90 | 96 | 102 |
| b — L>200 | 103 | 109 | 115 |
| d s — max | 39 | 42 | 45 |
| d s — min | 39.61 | 41.61 | 44.61 |
| x 1 | 10 | 11 | 11 |
| x 2 | 5 | 5.5 | 5.5 |
- Row 9 (d s — min): The source prints the (M39) d s min as 39.61 — above the nominal diameter, while the neighbouring sizes follow the nominal-minus-deviation ladder (41.61 at M42, 44.61 at M45). Carried verbatim from the collected page and not normalized; verify against DIN 938 itself before using this cell.
| Attribute | M48 | (M52) |
|---|---|---|
| P — Pitch — Coarse thread | 5 | 5 |
| P — Pitch — Fine thread-1 | 3 | 3 |
| P — Pitch — Fine thread-2 | - | - |
| b 1 | 48 | 52 |
| b — L≤125 | 102 | 110 |
| b — 125<L≤200 | 108 | 116 |
| b — L>200 | 121 | 129 |
| d s — max | 48 | 52 |
| d s — min | 47.61 | 51.54 |
| x 1 | 12.5 | 12.5 |
| x 2 | 6.3 | 6.3 |
Materials
- Material and property class specified per RFQ — studs are typically produced in carbon steel classes and stainless to match the mating nut; state the class (e.g. 8.8 / A2-70) and coating at quotation
Ordering & documentation
Documents
Shipments of DIN 938 Double-End Studs (Metal End ≈ 1 d) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 938 Double-End Studs (Metal End ≈ 1 d) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 938 Double-End Studs (Metal End ≈ 1 d)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 938 Double-End Studs (Metal End ≈ 1 d): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 938 double-end studs (metal end ≈ 1 d) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 938 double-end studs (metal end ≈ 1 d); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 938 double-end studs (metal end ≈ 1 d) run 3–7 days. High-strength and custom parts for din 938 double-end studs (metal end ≈ 1 d) run 15–25 days. Quantities or variants of din 938 double-end studs (metal end ≈ 1 d) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 938 Double-End Studs (Metal End ≈ 1 d) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 938 double-end studs (metal end ≈ 1 d) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 938, DIN 939 or DIN 835 — which screwed-in length do I need?
By the tapped hole, not the nut. The three designations differ in the metal end: ≈ 1 d (DIN 938), ≈ 1.25 d (DIN 939) and ≈ 2 d (DIN 835). A short engagement suits strong, deep threads in steel; the longer ends buy thread shear area in softer housings — aluminium, cast iron, shallow or repaired taps — where more engaged turns carry the clamp. Compare the b 1 rows across the three ladders in this catalog (at M12: 12 / 15 / 24 mm) and match your drawing's tapped-hole depth. All three share the same nut-end engagement ladders by grip, so the nut side of the RFQ reads identically.
What is the MOQ and lead time for DIN 938 Double-End Studs (Metal End ≈ 1 d)?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 938 Double-End Studs (Metal End ≈ 1 d) state?
State the full designation (DIN 938), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 938 Double-End Studs (Metal End ≈ 1 d) inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your DIN 938 Double-End Studs (Metal End ≈ 1 d)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support