DIN 787 Bolts for T-Slots
DIN 787 T-slot bolts, M5 to M48: T-slot width a with limit deviations, head and hook geometry (d2, e1, f, h1, h2, k) and commercial length ladders per slot size.
Last updated: 2026-11
Specifications
DIN 787 is the square-headed T-slot bolt that drops into a machine table slot and turns a quarter to lock — the collected 02/2005-edition table pairs each thread size with the T-slot width a it fits (a = 5 for M5 up to a = 54 for M48, with the slot-width limit deviations printed beside it, e.g. -0.3/-0.5 on the small slots and -0.4/-0.8 at M48), plus the head dimensions that matter for the slot: shank d2, head width e1, hook depth f, head heights h1/h2 and k. Note the source prints M12 twice — the thread serves both the a = 12 and a = 14 slots, with the second row carrying its own larger head (e1 22 versus 18) and an empty h2 cell — carried verbatim in the grid. The length ladders give the commercial l per size and the mass table prices the long clamping bolts. Fixture, clamp and press-table builders order these by slot width first: the thread follows the slot, not the other way round.
| Standard / scope | DIN 787 bolts and screws for T-slots — M5 to M48, edition 02/2005 (supersedes 07/2002) |
|---|---|
| T-slot width a | Per size with limit deviations printed: 5 (M5) to 54 (M48); M12 covers two slots (a = 12 and a = 14, separate head rows). The deviations are the slot fit, not the bolt tolerance |
| Head geometry | Shank d2, head width e1, hook f, heights h1/h2 and k per size — the dimensions that decide slot engagement and swing clearance |
| Commercial lengths l | Ladder per size in the second grid (M5 short clamping lengths through M48 long bolts); mass per 1000 pcs (ρ=7,85 kg/dm³) tabulated |
| Not tabulated | Strength class, finish, left-hand variants — per RFQ |
| d Thread size | a | a limit deviations | d2 | e1 | f | h1 | h2 | k |
|---|---|---|---|---|---|---|---|---|
| M 5 | 5 | -0.3 -0.5 | 10 | 9 | 1 | 6.5 | 10 | 3 |
| M 6 | 6 | -0.3 -0.5 | 12 | 10 | 1.6 | 8 | 13 | 4 |
| M 8 | 8 | -0.3 -0.5 | 16 | 13 | 1.6 | 12 | 18 | 6 |
| M 10 | 10 | -0.3 -0.5 | 20 | 15 | 1.6 | 14 | 21 | 6 |
| M 12 | 12 | -0.3 -0.6 | 25 | 18 | 2.5 | 16 | 25 | 7 |
| M 12 | 14 | -0.3 -0.6 | 28 | 22 | 2.5 | 20 | - | 8 |
| M 16 | 18 | -0.3 -0.6 | 36 | 25 | 2.5 | 24 | - | 9 |
| M 20 | 22 | -0.3 -0.6 | 45 | 35 | 2.5 | 32 | - | 14 |
| M 24 | 28 | -0.3 -0.6 | 56 | 40 | 4 | 41 | - | 16 |
| M 30 | 36 | -0.4 -0.7 | 70 | 54 | 6 | 50 | - | 22 |
| M 36 | 42 | -0.4 -0.7 | 82 | 65 | 6 | 60 | - | 26 |
| M 42 | 48 | -0.4 -0.7 | 95 | 75 | 6 | 70 | - | 30 |
| M 48 | 54 | -0.4 -0.8 | 110 | 85 | 6 | 80 | - | 34 |
- Source spanning title row carried verbatim: "Dimensions in mm - source DIN 787".
- Edition row carried from the source grid: "Publication Date 02/2005 - Supersedes DIN 787:07/2002".
| d Thread size | a | l | l | l | l | l | l | l | l | l | l | l | l | l | l |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d Thread size | a | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 |
| M5 | 5 | 5 | 6 | ||||||||||||
| M 6 | 6 | 10 | 15 | 18 | |||||||||||
| M 8 | 8 | 20 | 30 | 40 | |||||||||||
| M 10 | 10 | 40 | 48 | 70 | |||||||||||
| M 12 | 12 | 60 | 90 | 120 | 190 | ||||||||||
| M 12 | 14 | 75 | 100 | 140 | 200 | ||||||||||
| M 16 | 18 | 135 | 220 | 300 | 430 | ||||||||||
| M 20 | 22 | 340 | 440 | 610 | 810 | ||||||||||
| M 24 | 28 | 660 | 850 | 1130 | 1200 | ||||||||||
| M 30 | 36 | 1330 | 2000 | 2270 | 3300 | ||||||||||
| M 36 | 42 | 2400 | 3000 | 4100 | |||||||||||
| M 42 | 48 | 3400 | 4300 | 5800 | |||||||||||
| M 48 | 54 | 5300 | 8300 | 9200 |
- Source spanning title row carried verbatim: "DIN 787 2005 - Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm3) - commercia items".
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (16/5/7/8/9/12/13/14/15) — grid padded empty; per-row pre-pad widths: 16,16,16,5,7,8,9,12,12,13,14,14,16,15,15,16.
Materials
- T-slot bolts are typically medium-carbon steel, class 8.8-type strength for clamping duty, often zinc-plated or blackened; the hook end is forged or upset, not machined from thread rod. State thread size and T-slot width together (the fit is the pairing that matters), required length under the table, and finish; stainless variants for food or chemical table service are quoted against the same geometry
Ordering & documentation
Documents
Shipments of DIN 787 Bolts for T-Slots are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 787 Bolts for T-Slots orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 787 Bolts for T-Slots), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 787 Bolts for T-Slots: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 787 bolts for t-slots is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 787 bolts for t-slots; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 787 bolts for t-slots run 3–7 days. High-strength and custom parts for din 787 bolts for t-slots run 15–25 days. Quantities or variants of din 787 bolts for t-slots outside the standard range are confirmed at quotation.
Storage & shipping
DIN 787 Bolts for T-Slots are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 787 bolts for t-slots dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why does the table print M12 twice, and which row is mine?
Because the standard covers T-slots in two widths that both take an M12 bolt — the source grid carries the two rows back to back, each with its own slot width a and head dimensions, and the collected table reproduces that verbatim rather than merging them. Practically: identify your bolt by slot width first (measure the slot across, then read the a column), and take the thread size from the same row. Ordering "M12 T-bolt" without the slot width is the single most common error on these RFQs — the two M12s are not interchangeable in the slot.
What does the a limit deviation column mean for my machine table?
It is the tolerance band of the T-slot itself from the machine-tool standards, not a tighter bolt: a slot nominal 54 wide with -0.4/-0.8 machines out between 53.2 and 53.6, and the DIN 787 hook dimensions are set so the bolt seats in that band with the small clearance the table needs to slide the bolt in and rotate it. If your table is worn or the slots were re-cut, measure the actual slot width and send it with the RFQ — oversized slots may need the next size up or a stepped custom hook, which we quote against drawing.
What is the MOQ and lead time for DIN 787 Bolts for T-Slots?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 787 Bolts for T-Slots state?
State the full designation (DIN 787 Bolts for T-Slots), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 787 Bolts for T-Slots inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your DIN 787 Bolts for T-Slots
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support