DIN 605 Flat Countersunk Square Neck Bolts (Long Square)

Flat countersunk square-neck (coach) bolts to DIN 605 — long square neck, shank M6 to M10 in the collected ladder with head/shank/square-neck min-max rows and the grip-based thread-length bands.

Last updated: 2026-11

Request a Quote

DIN 605 Flat Countersunk Square Neck Bolts (Long Square) in an industrial setting
Illustrative image redrawn from real DIN 605 Flat Countersunk Square Neck Bolts (Long Square) product references — not a photograph of stocked items.

Specifications

DIN 605 is the long-square-neck flat countersunk bolt — the coach-bolt form where the round head seats flush in a countersunk hole and the square neck under the head turns with the bolt so a single wrench acts on the nut only. The long square suits thicker timber and clamp-up depth: the neck engages more material between the countersink and the nut face. The collected ladder covers M6 to M10 with min/max rows for the countersunk head diameter d k (16.55 → 24.65 mm max), shank d s, head height k and the neck dimension s (label as printed — the collected page carries no legend for it). Thread length follows the grip bands (L≤125 / 125<L≤200 / L>200). Lengths themselves are not tabulated by the collected specification — quote diameter × length off your drawing. Material, property class and finish are not printed by the source — per RFQ (state bare, galvanized or the timber-joint coating at quotation).

Standard DIN 605 — flat countersunk square neck bolts, long square
Size range M6 – M10 in the collected ladder
Head diameter d k: 15.45 – 24.65 mm min/max across the ladder
Head height k: min/max per size as printed
Neck dimension s: min/max per size (6.48 → 10.58 mm max) — label as printed, no legend on the collected page
Thread length b by grip: L≤125 / 125<L≤200 / L>200 rows per size
Lengths Not tabulated by the collected specification — quote diameter × length per drawing
Material / finish Not tabulated by the collected specification — per RFQ
DIN 605 flat countersunk square neck bolts, long square - attribute rows per size (M6 - M10)All dimensions in millimetres. Attribute labels follow the source: P = pitch; b = thread length by grip L; d k = countersunk head diameter; d s = shank diameter; k = head height; s = neck dimension (label as printed — the collected page prints no legend); "/" marks the source's empty cells. The source prints no material, property-class or finish columns — per RFQ.
AttributeM6M8M10
P — Pitch11.251.5
b — L≤125182226
b — 125<L≤200242832
b — L>200/4145
d k — max16.5520.6524.65
d k — min15.4519.3523.35
d s — max6810
d s — min5.527.429.42
k — max7.459.4511.55
k — min6.558.559.45
s — max6.488.5810.58
s — min5.527.429.42
  • Row 4 (b — L>200): The source prints "/" for the L>200 thread length on M6 — carried verbatim.
  • Row 10 (k — min): The source's k min ladder (6.55 → 8.55 → 9.45) drops from a 1 mm to a 3 mm step at M10 — transcribed verbatim; verify against DIN 605 itself before using this cell.
  • Row 12 (s — min): The s label carries no legend on the collected page — carried verbatim as printed; disambiguate against DIN 605 itself.

Materials

  • Material and finish specified per RFQ — square-neck bolts are typically supplied bare steel or hot-dip galvanized for timber and general construction; state the joint and coating at quotation

Ordering & documentation

Documents

Shipments of DIN 605 Flat Countersunk Square Neck Bolts (Long Square) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 605 Flat Countersunk Square Neck Bolts (Long Square) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 605 Flat Countersunk Square Neck Bolts (Long Square)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 605 Flat Countersunk Square Neck Bolts (Long Square): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 605 flat countersunk square neck bolts (long square) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 605 flat countersunk square neck bolts (long square); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 605 flat countersunk square neck bolts (long square) run 3–7 days. High-strength and custom parts for din 605 flat countersunk square neck bolts (long square) run 15–25 days. Quantities or variants of din 605 flat countersunk square neck bolts (long square) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 605 Flat Countersunk Square Neck Bolts (Long Square) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 605 flat countersunk square neck bolts (long square) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 605 or DIN 608 — long square or short square?

By the clamped thickness. Both are flat-countersunk square-neck bolts; the difference in the collected tables is the neck length and, with it, the size coverage — DIN 605 (long square) is tabulated M6 to M10, DIN 608 (short square) at M10 and M12. A long square turns with the bolt through more material, which is what a deep timber pack-up needs; a short square suits thinner clamps where the neck must not punch through the far face before the countersink seats. Compare the s (square side) and head d k rows across both pages, then choose by the drawn neck length — the collected tables do not tabulate the neck length itself, so confirm the square dimension on the RFQ.

What is the MOQ and lead time for DIN 605 Flat Countersunk Square Neck Bolts (Long Square)?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 605 Flat Countersunk Square Neck Bolts (Long Square) state?

State the full designation (DIN 605), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 605 Flat Countersunk Square Neck Bolts (Long Square) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 605 Flat Countersunk Square Neck Bolts (Long Square)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.