DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16)

DIN 70613 hexagon bolts with small (reduced) widths across flats — partial-thread hex bolts with head attributes b/e/k/r/s dimensioned M6 to M16 (s 9 to 22, one step below the standard series), property classes 5.8/8.8/10.9 as printed, for confined-space wrench access and weight-sensitive joints.

Last updated: 2026-11

Request a Quote

DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16) in an industrial setting
Illustrative image redrawn from real DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16) product references — not a photograph of stocked items.

Specifications

DIN 70613 is the reduced-wrench member of the hex bolt family: a standard hexagon head bolt whose width across flats (s) is one step below the usual series — s 9 at M6 instead of 10, s 22 at M16 instead of 24 — which is the whole point of the part: where a standard M16 bolt needs a 24 mm wrench, this one needs a 22 mm. That buys real things in the field: tighter wrench clearance in cramped housings and channels, lighter and smaller hardware kits, and a smaller head footprint where a standard head would foul adjacent structure. The trade-off is bearing area — a smaller s means a smaller head, so surface pressure under the head rises, which matters on soft or thin clamped parts. The collected grid covers the five tabulated threads M6 to M16 with the head/shank attributes b (thread length), e (circumscribed-circle diameter), k (head height), r (radius/fillet under the head) and s. The source legend also defines l (bolt length) and d (nominal thread diameter) but tabulates neither as a dimension row — length is a per-order pick, not a table row, and this page flags that rather than inventing a ladder. Property classes as printed: 5.8, 8.8, 10.9; thread tolerance 6g.

Standard / scope DIN 70613 hexagon bolts with small widths across flats (source title as printed); partial-thread member — the full-thread companion is DIN 70614 (registered alongside on this site)
Threads five tabulated sizes: M6, M8, M10, M12, M16
Width across flats (s) 9 / 12 / 14 / 17 / 22 (M6 → M16) — one wrench step below the standard series (standard: 10/13/16/18/24)
Head/shank attributes b 11 to 22, e 10,4 to 25,4, k 4 to 9, r 0,3 to 1 (mm, per the grid; decimal commas verbatim)
Materials / thread (as printed) Steel: 5.8, 8.8, 10.9; Thread: 6g; Stainless: -; Plastic: -; Non Ferrous: - (source makings block verbatim)
Equivalents (as printed) Equivalent norms: CSN 021201
Not tabulated No bolt-length ladder and no finishes printed on the source page — the legend defines l and d but prints no rows for them; length is a per-order RFQ pick
Hexagon bolts with small widths across flats to DIN 70613dimensions in mm; attribute legend per the source: b - length of the thread (at least), e - the diameter of the circumscribed circle (not less than), k - head height, s - size hex head turnkey
AttributeM6M8M10M12M16
b1114161822
e10,413,816,219,625,4
k45679
r0,30,50,511
s912141722
  • the source legend also defines l - length of bolt and d - the nominal diameter of the thread, but tabulates no dimension rows for either — no length ladder is invented here; length is a per-order RFQ dimension.
  • the r row prints 0,5/0,5 at M8/M10 and 1/1 at M12/M16 — duplicate adjacent values as captured, kept verbatim.
  • s is the reduced series (9/12/14/17/22, one step below the standard hex series) — that reduction is the defining property of DIN 70613 per the source page title.

Materials

  • The source makings block prints Steel: 5.8, 8.8, 10.9 with Thread: 6g and a literal "-" for Stainless, Plastic and Non Ferrous — so this page claims steel property classes only, and a stainless DIN 70613 is a quotation item, not a catalogue line. Pick the class by joint duty (5.8 for static low-load fixture work, 8.8 as the general machine-building default, 10.9 where the bolt is sized tight to load) and remember the reduced head: the smaller s concentrates bearing pressure, so on aluminium, thin plate or soft clamped parts specify a hardened washer under the head and state it on the RFQ. State thread, length, class, finish and quantity per size; anything outside the printed grid is confirmed at quotation.

Ordering & documentation

Documents

Shipments of DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 70613 hexagon bolts with small widths across flats (m6 – m16) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 70613 hexagon bolts with small widths across flats (m6 – m16); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 70613 hexagon bolts with small widths across flats (m6 – m16) run 3–7 days. High-strength and custom parts for din 70613 hexagon bolts with small widths across flats (m6 – m16) run 15–25 days. Quantities or variants of din 70613 hexagon bolts with small widths across flats (m6 – m16) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 70613 hexagon bolts with small widths across flats (m6 – m16) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why would I choose a reduced-widths-across-flats bolt, and what do I give up?

You gain wrench clearance and weight: the s ladder here (9/12/14/17/22) sits one step below the standard series, so the wrench that fits a standard M12 (18 mm) is replaced by a 17 mm — useful in packed housings, narrow channels and anywhere the tool swing is constrained, and the smaller head also trims kit weight for large installations. What you give up is bearing area and wrench robustness: the smaller head loads the clamped surface harder (use a washer on soft or thin parts) and an over-torqued 17 mm hex is more likely to round than an 18 mm one. Where neither constraint bites, a standard-series bolt is the less exotic choice — reduced-wrench bolts exist for the cases where it does.

The legend defines l (bolt length) and d (nominal diameter), but the table has no rows for them — how do I order a length?

Exactly as the source leaves it: the legend is a vocabulary list, not a dimension ladder, and this page does not invent one. The tabulated grid fixes the head/shank geometry per thread (M6-M16); bolt length is a per-order dimension you state on the RFQ (diameter x length, e.g. M10 x 40), matched to the thread style of the part — DIN 70613 being the partial-thread member, the grip/thread-length split follows the standard document, which is the authority for anything the source page does not print. If your drawing needs the partial-thread proportions confirmed (b here is the minimum thread length per the legend: 11 at M6 up to 22 at M16), verify against the standard rather than against this table.

DIN 70613 or DIN 70614 — both are "small widths across flats", so which one?

The thread run decides it. DIN 70613 (this page) is the partial-thread bolt: the shank has a plain section, and the printed b row (11 to 22 across M6-M16) is the thread length — the right pick where a long grip or a shank through a clearance hole is wanted. DIN 70614 is the same head series with full thread to the head, plus the thread-runout details that go with it (its grid prints a max. a undercut row); it is the pick where the nut can run the whole shank or the bolt threads into a deep tapped hole. Both share the reduced s ladder (9/12/14/17/22) and the same 5.8/8.8/10.9 classes as printed, so they interchange dimensionally at the head but not functionally at the shank — check which run your joint actually needs before quoting either.

What should an RFQ for DIN 70613 bolts state?

Thread and length as a pair (e.g. M12 x 60 — length is not tabulated by the source, so it is your drawing's call), property class from the printed ladder (5.8 / 8.8 / 10.9), finish if not plain, thread tolerance 6g if your mating part needs it stated, quantity per size — and, if the joint is soft-material or thin-plate, the washer-under-head requirement that the reduced s makes relevant. Stainless versions (the source prints "-" for Stainless) and sizes outside M6-M16 are confirmed at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 70613 Hexagon Bolts with Small Widths Across Flats (M6 – M16)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.