ASTM A193 Grade B7 Stud Bolts
Stud bolts and threaded rod in ASTM A193 Grade B7 — medium carbon alloy steel, quenched and tempered, 125 ksi minimum tensile (115 ksi over 2-1/2" to 4", 100 ksi over 4"), C35 hardness, paired with A194 2H heavy hex nuts. The workhorse grade for flanged piping, refineries and oil & gas construction.
Last updated: 2026-11
Specifications
B7 is the default high-strength stud-bolt grade of the inch series: quenched-and-tempered medium carbon alloy steel per ASTM A193, threaded over its full length as continuous-thread studs to ASME B18.31.2 and clamped with heavy hex nuts on both ends. Flanged joints favour it because the full thread allows complete nut engagement at any grip length and the joint can be tensioned or torqued from either side. Thread convention follows flange practice — UNC coarse up to 1" diameter, 8 threads per inch above that. In corrosive service (offshore, splash zone) B7 depends on its protection system: hot-dip galvanizing or fluoropolymer coatings applied over the prepared base.
| Standard | ASTM A193 Grade B7 (material); continuous/double-end stud dimensions per ASME B18.31.2 |
|---|---|
| Material | Medium carbon alloy steel, quenched and tempered |
| Tensile strength, min | 125 ksi (1/4"–2-1/2"); 115 ksi (2-5/8"–4"); 100 ksi (4-1/8"–7") |
| Hardness | C35 |
| Thread convention | UNC coarse to 1" diameter; 8 threads per inch (8UN) above |
| Nut pairing | ASTM A194 Grade 2H heavy hex nuts — the default for refinery and pipeline service |
| Stocked sizes | Studs 1/2"–2-1/2" diameter, cut lengths to 15.25" per supplier weight charts |
| Corrosion protection | Hot-dip galvanizing or fluoropolymer (PTFE-family) coatings for offshore/splash-zone and severe service |
| Typical applications | Pipe flanges (ASME B16.5 joints), refinery and process plant bolting, construction, oil & gas |
| Grade | Field | Recorded value |
|---|---|---|
| ASTM A193 B7 | Nominal size range | 1/4 in to 2-1/2 in; 2-5/8 in to 4 in; 4-1/8 in to 7 in |
| ASTM A193 B7 | Strength grade | ASTM A193 Grade B7 — tensile min 125 ksi (1/4–2-1/2 in), 115 ksi (2-5/8–4 in), 100 ksi (4-1/8–7 in); hardness max C35 |
Industry reference — figures as printed in the collected technical tables; availability confirmed per quotation.
Materials
- Medium carbon alloy steel, quenched and tempered
A193 B7 takes its strength from quenched-and-tempered medium carbon alloy steel, with minimum tensile stepping down by diameter — 125 ksi through 2-1/2 in, 115 ksi to 4 in, 100 ksi to 7 in — under a C35 hardness cap.
Because the requirement changes with size, confirm the tensile value for your actual diameter on the mill test report instead of assuming the small-size figure.
Ordering & documentation
Documents
Shipments of ASTM A193 Grade B7 Stud Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASTM A193 Grade B7 Stud Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ASTM A193 Grade B7 Stud Bolts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ASTM A193 Grade B7 Stud Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for astm a193 grade b7 stud bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for astm a193 grade b7 stud bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for astm a193 grade b7 stud bolts run 3–7 days. High-strength and custom parts for astm a193 grade b7 stud bolts run 15–25 days. Quantities or variants of astm a193 grade b7 stud bolts outside the standard range are confirmed at quotation.
Storage & shipping
ASTM A193 Grade B7 Stud Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store astm a193 grade b7 stud bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What should a B7 stud bolt RFQ line state?
The complete callout, not just the grade. A typical line reads: stud bolt to ASME B18.31.2, 1"-8UN × 140 mm, ASTM A193 B7, with 2 heavy hex nuts A194 2H, PTFE-coated — dimensional standard, thread series, length, material grade, matched nuts and coating. ASME B18.31.2 is a dimensional standard only; the strength comes from the ASTM material specification, so the two are always quoted together.
Can B7 stud bolts be used in corrosive or offshore environments?
Only with a designed protection system. B7 is a carbon alloy steel whose strength makes it the workhorse for flanged connections in less corrosive areas, but in offshore and splash-zone service bare B7 does not survive: suppliers protect it with hot-dip galvanizing for atmospheric exposure or fluoropolymer coatings (PTFE family, applied over a phosphate or zinc-plated base) for immersion and severe service. Where the specification calls for bare corrosion resistance, stainless grades such as A193 B8/B8M are the usual substitution — with their own strength trade-offs.
What is the MOQ and lead time for ASTM A193 Grade B7 Stud Bolts?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ASTM A193 Grade B7 Stud Bolts state?
State the full designation (ASTM A193 Grade B7 (material)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
- Threaded Rod and Stud Bolt Standards: Mapping DIN 975/976 and ASTM A193/A320 to Grades, Coatings and Certification
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ASTM A193 Grade B7 Stud Bolts inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your ASTM A193 Grade B7 Stud Bolts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support