ISO Class 10.9 Bolts

Property Class 10.9 bolts per ISO 898-1 — alloy steel, quenched and tempered, 1,040 MPa minimum tensile, 940 MPa yield, 32–39 HRC. The high-strength structural and heavy-duty metric grade.

Last updated: 2026-11

Request a Quote

ISO Class 10.9 Bolts in an industrial setting
Illustrative image redrawn from real ISO Class 10.9 Bolts product references — not a photograph of stocked items.

Specifications

Class 10.9 is the step up from 8.8 where joint loads or weight budgets demand it: high-strength structural connections, heavy equipment, and automotive drivetrain and chassis hardware. It is quenched and tempered alloy steel with a minimum tensile of 1,040 MPa and yield at 90% of tensile, so it stretches less before yielding and clamps more tightly for the same bolt size. The trade-offs are standard high-strength practice: more sensitive to hydrogen embrittlement from improper plating, so coated 10.9 parts are baked after plating.

Standard ISO 898-1, property Class 10.9 (hex bolts per ISO 4014/4017)
Material Alloy steel, quenched and tempered
Tensile strength, min 1,040 MPa (nominal 1,000 MPa) — 150,800 psi
Yield strength (min) / proof load 940 MPa yield; proof load 830 MPa
Hardness 32–39 HRC
Typical applications High-strength structural connections, heavy-duty and high-stress machinery, chassis and drivetrain hardware
Finishes Zinc plate, zinc flake, hot-dip galvanized (allowed for this class); post-plate bake for hardened parts

Where this grade fits

Class 10.9 buys roughly 30% more tensile than 8.8 at the cost of ductility: it is more sensitive to hydrogen embrittlement, so electroplated parts need a post-plate bake, and its higher notch sensitivity limits the fatigue gain a grade upgrade delivers. Choose it where the joint calculation needs the clamp load — not as a default strength upgrade.

Materials

  • Alloy steel (quenched and tempered)

Class 10.9 allows three routes: boron/additive carbon steel tempered at 340 °C minimum, additive carbon steel with 0.20-0.55% carbon, or true alloy steel quenched and tempered at 425 °C minimum.

Which route a mill chose shows up in the certificate chemistry rather than in the class marking — require the MTR where that distinction matters.

Ordering & documentation

Documents

Shipments of ISO Class 10.9 Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO Class 10.9 Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO Class 10.9 Bolts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ISO Class 10.9 Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for iso class 10.9 bolts is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for iso class 10.9 bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso class 10.9 bolts run 3–7 days. High-strength and custom parts for iso class 10.9 bolts run 15–25 days. Quantities or variants of iso class 10.9 bolts outside the standard range are confirmed at quotation.

Storage & shipping

ISO Class 10.9 Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso class 10.9 bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When should I specify 10.9 instead of 8.8?

Where the joint calculation needs the extra clamp load or fatigue margin: higher-tensile structural connections, heavily loaded machinery, and weight-sensitive assemblies. 10.9 is about 30% stronger in tensile than 8.8 but less ductile and more embrittlement-sensitive, so if the load case is comfortably within 8.8 capability, 8.8 is the more forgiving choice. Both classes accept galvanizing and common coatings.

What is the MOQ and lead time for this bolt grade?

The minimum order quantity for ISO Class 10.9 Bolts is 1,000–10,000 pieces depending on size. Stock items of ISO Class 10.9 Bolts ship in 3–7 days; high-strength and custom parts in 15–25 days. Common diameters of ISO Class 10.9 Bolts are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this bolt grade state?

For ISO Class 10.9 Bolts, state the standard and grade (for example ISO 4017 Class 8.8 or ASTM F3125 Grade A325 Type 1), diameter and length, thread type (metric coarse or UNC/UNF), finish (plain, zinc, or hot-dip galvanized where the grade permits), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO Class 10.9 Bolts inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your ISO Class 10.9 Bolts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.