DIN 188 T-Head Bolts with Double Nib
DIN 188 T-head bolts with double nib, M8 to M80 — the T-head bolt whose nibs lock into the underside of a slot so the head cannot twist — with the full collected 14-size table: pitch, the source's three thread-length bands, shank and head geometry and the nib radii.
Last updated: 2026-11
Specifications
DIN 188 is the anti-rotation member of the T-head family. Where DIN 186's plain T-head simply drops into a T-slot, DIN 188 adds two nibs on the underside of the head that engage the slot's undercut groove: the bolt cannot rotate in the slot, so a fixture or clamp bolted to it stays pointed where it was set. That matters on machine tables, clamping rails and mould fixings where several T-bolts carry one strap and any single bolt twisting out of alignment loses its bearing. The collected table covers M8 to M80 — 14 sizes, the large end of the family — with thread pitch P, the source's three thread-length bands b 1 / b 2 / b 3 (with "/" where a band does not apply to that size), shank diameter d s (max / min), head height k, T-slot tongue width n, head length m, radius r 1 ≈ and the nib radius r 2 ① (the source's legend-less ① marker, reproduced verbatim). Materials, property classes and finishes are not printed by the collected specification and stay per RFQ. For the plain T-head form see DIN 186 on this site.
| Standard | DIN 188 — T-head bolts with double nib (anti-rotation head for undercut T-slots) |
|---|---|
| Series | M8 – M80 (14 sizes tabulated) |
| Tabulated geometry | Per size: pitch P, thread-length bands b 1 / b 2 / b 3, shank d s (max / min), head height k (max / min), tongue width n (max / min), head length m (max / min), radius r 1 ≈, nib radius r 2 ① (max) |
| Function | T-head seats in the slot; double nibs engage the slot undercut so the bolt cannot rotate under clamp torque |
| Materials / strength | Not tabulated by the collected specification — per RFQ (property class per clamping load) |
| Size | P — Pitch | b 1 | b 2 | b 3 | d s — max | d s — min | k — max | k — min | n — max | n — min | m — max | m — min | r 1 — ≈ | r 2 ① — max |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M8 | 1.25 | 22 | 28 | / | 8.58 | 7.42 | 5.9 | 5.1 | 8.75 | 7.25 | 18.9 | 17.1 | 0.5 | 1.2 |
| M10 | 1.5 | 26 | 32 | / | 10.58 | 9.42 | 7.45 | 6.55 | 10.75 | 9.25 | 22 | 20 | 0.5 | 1.5 |
| M12 | 1.75 | 30 | 36 | 49 | 12.7 | 11.3 | 8.75 | 7.25 | 12.9 | 11.1 | 27 | 25 | 1 | 1.8 |
| M16 | 2 | 38 | 44 | 57 | 16.7 | 15.3 | 11.4 | 9.6 | 16.9 | 15.1 | 31 | 29 | 1 | 2.4 |
| M20 | 2.5 | 46 | 52 | 65 | 20.84 | 19.16 | 13.9 | 12.1 | 21 | 19 | 37.25 | 34.75 | 1 | 3 |
| M24 | 3 | 54 | 60 | 73 | 24.84 | 23.16 | 15.9 | 14.1 | 25 | 23 | 44.25 | 41.75 | 1.6 | 3.6 |
| M30 | 3.5 | 66 | 72 | 85 | 30.84 | 29.16 | 20 | 18 | 31 | 29 | 55.5 | 52.5 | 1.6 | 4.5 |
| M36 | 4 | 78 | 84 | 97 | 37 | 35 | 24 | 22 | 37.25 | 34.75 | 67.5 | 64.5 | 2 | 5.4 |
| M42 | 4.5 | / | 96 | 109 | 43 | 41 | 27 | 25 | 43.25 | 40.75 | 81.5 | 78.5 | 2 | 6.3 |
| M48 | 5 | / | 108 | 121 | 49 | 47 | 31 | 29 | 49.25 | 46.75 | 89.75 | 86.25 | 2 | 7.2 |
| M56 | 5.5 | / | 124 | 137 | 57.2 | 54.8 | 36.25 | 33.75 | 57.5 | 54.5 | 103.75 | 100.25 | 3 | 8.4 |
| M64 | 6 | / | 130 | 143 | 65.2 | 62.8 | 41.25 | 38.75 | 65.5 | 62.5 | 116.75 | 113.25 | 3 | 9.6 |
| M72 | 6 | / | 156 | 169 | 73.2 | 70.8 | 46.25 | 43.75 | 73.5 | 70.5 | 130 | 126 | 4 | 10.8 |
| M80 | 6 | / | 172 | 185 | 81.2 | 78.8 | 51.25 | 48.75 | 81.5 | 78.5 | 142 | 138 | 4 | 12 |
Materials
- Material and property class specified per RFQ — confirm against clamping load at quotation
Ordering & documentation
Documents
Shipments of DIN 188 T-Head Bolts with Double Nib are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 188 T-Head Bolts with Double Nib orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 188 T-Head Bolts with Double Nib), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 188 T-Head Bolts with Double Nib: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 188 t-head bolts with double nib is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 188 t-head bolts with double nib; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 188 t-head bolts with double nib run 3–7 days. High-strength and custom parts for din 188 t-head bolts with double nib run 15–25 days. Quantities or variants of din 188 t-head bolts with double nib outside the standard range are confirmed at quotation.
Storage & shipping
DIN 188 T-Head Bolts with Double Nib are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 188 t-head bolts with double nib dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When does a T-head bolt need the double-nib head?
When the bolt must stay square to the slot. A plain DIN 186 head is free to rotate, which is fine for a single strap clamp but a problem where two bolts share one strap, where a bracket must stay aligned with the machine axis, or where the assembly is serviced often and each re-set must land in the same place. The nibs engage the slot's undercut, so orientation is fixed for good. Before specifying, confirm the slot itself: nibs need an undercut groove in the T-slot profile, so a slot cut for plain T-heads will not accept DIN 188 — check the tongue width n in the table against the slot and confirm the groove form. For the slot without undercut, DIN 186 remains the part.
What is the MOQ and lead time for this bolt type?
The minimum order quantity for DIN 188 T-Head Bolts with Double Nib is 1,000–10,000 pieces depending on size. Stock items of DIN 188 T-Head Bolts with Double Nib ship in 3–7 days; high-strength and custom parts in 15–25 days. Common diameters of DIN 188 T-Head Bolts with Double Nib are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 188 T-Head Bolts with Double Nib?
Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 188 T-Head Bolts with Double Nib state?
State the full designation (DIN 188), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- What Bolt Property Classes 8.8, 10.9 and 12.9 Encode — and When High Strength Stops Being the Right Choice
- Bolt Grade Selection: ISO 898-1 8.8/10.9/12.9 vs ASTM A307 and A325
- 8.8 vs 10.9 vs 12.9 Bolts: Strength, Hardness and Cost — What the Evidence Settles
- Calculating Bolt Preload and Clamp Force: Torque, Friction and Tightening Method
- How to Determine Tightening Torque and Choose a Tightening Method for a Bolted Joint
- Fastener Failure Modes: Which Fatigue, Creep and SCC Controls the Evidence Supports
- Hydrogen Embrittlement in High-Strength Bolts: Which Grades Need Controls, Which Coatings and Baking Schedules Are Acceptable, and What to Require Before the RFQ
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 188 T-Head Bolts with Double Nib inquiry
- ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
- ✓ State the applicable property class or material grade, head style, and coating or finish.
- ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
- ✓ Give quantity per size, destination and required material or inspection certificates.
- ✓ Factory-direct pricing for your DIN 188 T-Head Bolts with Double Nib
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support