DIN 960 Hex Bolts (Fine Pitch, Partially Threaded)

Partially threaded hexagon head bolts with fine-pitch thread per DIN 960 — nine size-block grids covering M8 to M100, with one or two fine pitch selections per size, thread-length bands L≤125 / 125<L≤200 / L>200 and product grades A/B tolerance rows. Fine-pitch counterpart of DIN 931; ISO successor designation: ISO 8765.

Last updated: 2026-11

Request a Quote

DIN 960 Hex Bolts (Fine Pitch, Partially Threaded) in an industrial setting
Illustrative image redrawn from real DIN 960 Hex Bolts (Fine Pitch, Partially Threaded) product references — not a photograph of stocked items.

Specifications

DIN 960 is the fine-pitch member of the DIN hex-bolt pair: the same hexagon head geometry buyers know from DIN 931, but with a reduced-pitch thread and a defined unthreaded shank between head and thread. Fine pitch is chosen for a reason, and the collected tables show the mechanics of it: each size block carries a fine thread-1 pitch row and, where the size has one, a fine thread-2 row (M8 carries a single fine pitch of 1; M10 and M12 run 1 / 1.25 and 1.5 / 1.25; M20 runs 1.5 / 2; the largest blocks M80 - M100 tabulate a single fine pitch of 4). A finer pitch buys adjustment sensitivity and thin-nut engagement on tapped parts, vibration resistance from the shallower helix, and higher effective tensile stress area than the coarse thread of the same diameter — at the cost of easier thread damage and a stricter cleanliness discipline during assembly. The thread-length bands (L≤125, 125<L≤200, L>200) make the shank a sized feature: the bolt must be selected so the thread runout falls outside the grip, exactly as with its coarse-pitch counterpart. The grids print Grade A and Grade B min rows (tolerance classes, not strength), and many Grade A cells in the largest blocks print "-" — carried verbatim from the source, meaning the value is not tabulated there. Strength grades, proof loads and finish are not tabulated on this page — per RFQ.

Standard DIN 960 — hexagon head bolts, fine-pitch thread, partially threaded; size blocks M8 - M100
Thread Fine pitch selections per size as printed (fine thread-1 / fine thread-2): e.g. M8 1 / -, M10 1 / 1.25, M12 1.5 / 1.25, M20 1.5 / 2, M36 3 / -, M80 - M100 a single fine pitch of 4
Thread-length bands b for L≤125, 125<L≤200 and L>200, tabulated per size (e.g. M12: 30 / 36 / 49; M100: - / - / 225 — the L≤125 row is empty from M56 up, as printed)
Product grades A and B tolerance rows in the grids (da, ds, dw, e, k, s carry Grade A / Grade B min pairs where tabulated); tolerance class, not strength — property class per RFQ
Head geometry (anchor sizes from the collected tables) Width across flats s max = nominal size (M12: 18, M20: 30, M36: 55, M100: 145); head height k nominal (M12: 7.5, M20: 12.5, M36: 22.5, M100: 63); e min Grade B (M12: 20.88, M36: 60.79, M100: 161.03)
Series extent Non-preferred sizes print in parentheses in the grid headers, as on the source: (M14), (M18), (M22), (M27), (M39), (M45), (M52), (M60), (M68), (M76)
Counterpart / successor Fine-pitch counterpart of DIN 931 (coarse DIN pair); ISO successor designation ISO 8765 — read the drawing before substituting between designations
Not tabulated Strength grades (ISO 898-1 classes), proof loads, materials, finish — per RFQ
DIN 960 hexagon head bolts, fine-pitch thread — M8 / M10 / M12 (block 1 of 9)Dimensions per the collected page: size blocks of three thread sizes each (M8 - M100). Rows: P (pitch, fine thread-1 / fine thread-2), thread length b (L≤125 / 125<L≤200 / L>200), c min/max, da max, ds max + Grade A/B min, dw Grade A/B min, e Grade A/B min, k Nominal Size + Grade A/B min/max, k1 min, r min, s max=nominal size + Grade A/B min. The two-row label column is the source's rowspan layout, carried as separate leading cells with the spanned cells empty. All dimensions in mm as printed. Verification: fetched from the live page 2026-11-02, token-for-token equal to the live-DOM extraction.
Screw Thread dM8M10M12
PPitchFine thread-1111.5
Fine thread-2-1.251.25
Length of Thread bL≤125222630
125<L≤200283236
L>200414549
cmin0.150.150.15
max0.60.60.6
damax9.211.213.7
dsmax81012
Grade Amin7.789.7811.73
Grade Bmin7.649.6411.57
dwGrade Amin11.615.617.4
Grade Bmin11.415.417.2
eGrade Amin14.3818.921.1
Grade Bmin14.218.7220.88
kNominal Size5.36.47.5
Grade Amin5.156.227.32
max5.456.587.68
Grade Bmin5.066.117.21
max5.546.697.79
k1min3.544.285.05
rmin0.40.40.6
smax=nominal size131719
Grade Amin12.7316.7318.67
Grade Bmin12.5716.5718.48
  • Row 4 (): Thread-length bounds print full-width comparison characters ('125<L≤200', 'L>200') as on the source page, carried verbatim.
  • Cells print '-' where the source tabulates no value ('Fine thread-2' rows affected); '-' carried verbatim, not read as zero or blank.
DIN 960 hexagon head bolts, fine-pitch thread — (M14) / M16 / (M18) (block 2 of 9)Dimensions per the collected page: size blocks of three thread sizes each (M8 - M100). Rows: P (pitch, fine thread-1 / fine thread-2), thread length b (L≤125 / 125<L≤200 / L>200), c min/max, da max, ds max + Grade A/B min, dw Grade A/B min, e Grade A/B min, k Nominal Size + Grade A/B min/max, k1 min, r min, s max=nominal size + Grade A/B min. The two-row label column is the source's rowspan layout, carried as separate leading cells with the spanned cells empty. All dimensions in mm as printed. Verification: fetched from the live page 2026-11-02, token-for-token equal to the live-DOM extraction.
Screw Thread d(M14)M16(M18)
PPitchFine thread-11.51.52
Fine thread-2--1.5
Length of Thread bL≤125343842
125<L≤200404448
L>200535761
cmin0.150.20.2
max0.60.80.8
damax15.717.720.2
dsmax141618
Grade Amin13.7315.7317.73
Grade Bmin13.5715.5717.57
dwGrade Amin20.522.525.3
Grade Bmin20.12224.8
eGrade Amin24.4926.7530.14
Grade Bmin23.9126.1729.56
kNominal Size8.81011.5
Grade Amin8.629.8211.28
max8.9810.1811.72
Grade Bmin8.519.7111.15
max9.0910.2911.85
k1min5.966.87.8
rmin0.60.60.6
smax=nominal size222427
Grade Amin21.6723.6726.67
Grade Bmin21.1623.1626.16
  • Row 4 (): Thread-length bounds print full-width comparison characters ('125<L≤200', 'L>200') as on the source page, carried verbatim.
  • Cells print '-' where the source tabulates no value ('Fine thread-2' rows affected); '-' carried verbatim, not read as zero or blank.
DIN 960 hexagon head bolts, fine-pitch thread — M20 / (M22) / M24 (block 3 of 9)Dimensions per the collected page: size blocks of three thread sizes each (M8 - M100). Rows: P (pitch, fine thread-1 / fine thread-2), thread length b (L≤125 / 125<L≤200 / L>200), c min/max, da max, ds max + Grade A/B min, dw Grade A/B min, e Grade A/B min, k Nominal Size + Grade A/B min/max, k1 min, r min, s max=nominal size + Grade A/B min. The two-row label column is the source's rowspan layout, carried as separate leading cells with the spanned cells empty. All dimensions in mm as printed. Verification: fetched from the live page 2026-11-02, token-for-token equal to the live-DOM extraction.
Screw Thread dM20(M22)M24
PPitchFine thread-11.522
Fine thread-221.51.5
Length of Thread bL≤125465054
125<L≤200525660
L>200656973
cmin0.20.20.2
max0.80.80.8
damax22.424.426.4
dsmax202224
Grade Amin19.6721.6723.67
Grade Bmin19.4821.4823.48
dwGrade Amin28.23033.6
Grade Bmin27.729.533.2
eGrade Amin33.5335.7239.98
Grade Bmin32.9535.0339.55
kNominal Size12.51415
Grade Amin12.2813.7814.78
max12.7214.2215.22
Grade Bmin12.1513.6514.65
max12.8514.3515.35
k1min8.59.610.3
rmin0.80.80.8
smax=nominal size303236
Grade Amin29.6731.6135.38
Grade Bmin29.163135
  • Row 4 (): Thread-length bounds print full-width comparison characters ('125<L≤200', 'L>200') as on the source page, carried verbatim.
DIN 960 hexagon head bolts, fine-pitch thread — (M27) / M30 / (M33) (block 4 of 9)Dimensions per the collected page: size blocks of three thread sizes each (M8 - M100). Rows: P (pitch, fine thread-1 / fine thread-2), thread length b (L≤125 / 125<L≤200 / L>200), c min/max, da max, ds max + Grade A/B min, dw Grade A/B min, e Grade A/B min, k Nominal Size + Grade A/B min/max, k1 min, r min, s max=nominal size + Grade A/B min. The two-row label column is the source's rowspan layout, carried as separate leading cells with the spanned cells empty. All dimensions in mm as printed. Verification: fetched from the live page 2026-11-02, token-for-token equal to the live-DOM extraction.
Screw Thread d(M27)M30(M33)
PPitchFine thread-1222
Fine thread-2---
Length of Thread bL≤125606672
125<L≤200667278
L>200798591
cmin0.20.20.2
max0.80.80.8
damax30.433.436.4
dsmax273033
Grade Amin---
Grade Bmin26.4829.4832.38
dwGrade Amin---
Grade Bmin3842.746.6
eGrade Amin---
Grade Bmin45.250.8555.37
kNominal Size1718.721
Grade Amin---
max---
Grade Bmin16.6518.2820.58
max17.3519.1221.42
k1min11.712.814.4
rmin111
smax=nominal size414650
Grade Amin---
Grade Bmin404549
  • Row 4 (): Thread-length bounds print full-width comparison characters ('125<L≤200', 'L>200') as on the source page, carried verbatim.
  • Cells print '-' where the source tabulates no value ('Fine thread-2', 'Grade A', 'dw', 'e', 'max' rows affected); '-' carried verbatim, not read as zero or blank.
DIN 960 hexagon head bolts, fine-pitch thread — M36 / (M39) / M42 (block 5 of 9)Dimensions per the collected page: size blocks of three thread sizes each (M8 - M100). Rows: P (pitch, fine thread-1 / fine thread-2), thread length b (L≤125 / 125<L≤200 / L>200), c min/max, da max, ds max + Grade A/B min, dw Grade A/B min, e Grade A/B min, k Nominal Size + Grade A/B min/max, k1 min, r min, s max=nominal size + Grade A/B min. The two-row label column is the source's rowspan layout, carried as separate leading cells with the spanned cells empty. All dimensions in mm as printed. Verification: fetched from the live page 2026-11-02, token-for-token equal to the live-DOM extraction.
Screw Thread dM36(M39)M42
PPitchFine thread-1333
Fine thread-2---
Length of Thread bL≤125788490
125<L≤200849096
L>20097103109
cmin0.20.30.3
max0.811
damax39.442.445.6
dsmax363942
Grade Amin---
Grade Bmin35.3838.3841.38
dwGrade Amin---
Grade Bmin51.155.959.9
eGrade Amin---
Grade Bmin60.7966.4471.3
kNominal Size22.52526
Grade Amin---
max---
Grade Bmin22.0824.5825.58
max22.9225.4226.42
k1min15.517.217.9
rmin111.2
smax=nominal size556065
Grade Amin---
Grade Bmin53.858.863.1
  • Row 4 (): Thread-length bounds print full-width comparison characters ('125<L≤200', 'L>200') as on the source page, carried verbatim.
  • Cells print '-' where the source tabulates no value ('Fine thread-2', 'Grade A', 'dw', 'e', 'max' rows affected); '-' carried verbatim, not read as zero or blank.
DIN 960 hexagon head bolts, fine-pitch thread — (M45) / M48 / (M52) (block 6 of 9)Dimensions per the collected page: size blocks of three thread sizes each (M8 - M100). Rows: P (pitch, fine thread-1 / fine thread-2), thread length b (L≤125 / 125<L≤200 / L>200), c min/max, da max, ds max + Grade A/B min, dw Grade A/B min, e Grade A/B min, k Nominal Size + Grade A/B min/max, k1 min, r min, s max=nominal size + Grade A/B min. The two-row label column is the source's rowspan layout, carried as separate leading cells with the spanned cells empty. All dimensions in mm as printed. Verification: fetched from the live page 2026-11-02, token-for-token equal to the live-DOM extraction.
Screw Thread d(M45)M48(M52)
PPitchFine thread-1333
Fine thread-2---
Length of Thread bL≤12596102-
125<L≤200102108116
L>200115121129
cmin0.30.30.3
max111
damax48.652.656.6
dsmax454852
Grade Amin---
Grade Bmin44.3847.3851.26
dwGrade Amin---
Grade Bmin64.769.474.2
eGrade Amin---
Grade Bmin76.9582.688.25
kNominal Size283033
Grade Amin---
max---
Grade Bmin27.5829.5832.5
max28.4230.4233.5
k1min19.320.922.8
rmin1.21.61.6
smax=nominal size707580
Grade Amin---
Grade Bmin68.173.178.1
  • Row 4 (): Thread-length bounds print full-width comparison characters ('125<L≤200', 'L>200') as on the source page, carried verbatim.
  • Cells print '-' where the source tabulates no value ('Fine thread-2', 'Length of Thread b', 'Grade A', 'dw', 'e', 'max' rows affected); '-' carried verbatim, not read as zero or blank.
DIN 960 hexagon head bolts, fine-pitch thread — M56 / (M60) / M64 (block 7 of 9)Dimensions per the collected page: size blocks of three thread sizes each (M8 - M100). Rows: P (pitch, fine thread-1 / fine thread-2), thread length b (L≤125 / 125<L≤200 / L>200), c min/max, da max, ds max + Grade A/B min, dw Grade A/B min, e Grade A/B min, k Nominal Size + Grade A/B min/max, k1 min, r min, s max=nominal size + Grade A/B min. The two-row label column is the source's rowspan layout, carried as separate leading cells with the spanned cells empty. All dimensions in mm as printed. Verification: fetched from the live page 2026-11-02, token-for-token equal to the live-DOM extraction.
Screw Thread dM56(M60)M64
PPitchFine thread-1444
Fine thread-2---
Length of Thread bL≤125---
125<L≤200124132140
L>200137145153
cmin---
max111
damax636771
dsmax566064
Grade Amin---
Grade Bmin55.2659.2663.26
dwGrade Amin---
Grade Bmin78.783.488.2
eGrade Amin---
Grade Bmin93.5699.21104.86
kNominal Size353840
Grade Amin---
max---
Grade Bmin34.537.539.5
max35.538.540.5
k1min24.226.227.6
rmin222
smax=nominal size859095
Grade Amin---
Grade Bmin82.887.892.8
  • Row 4 (): Thread-length bounds print full-width comparison characters ('125<L≤200', 'L>200') as on the source page, carried verbatim.
  • Cells print '-' where the source tabulates no value ('Fine thread-2', 'Length of Thread b', 'c', 'Grade A', 'dw', 'e', 'max' rows affected); '-' carried verbatim, not read as zero or blank.
DIN 960 hexagon head bolts, fine-pitch thread — (M68) / M72 / (M76) (block 8 of 9)Dimensions per the collected page: size blocks of three thread sizes each (M8 - M100). Rows: P (pitch, fine thread-1 / fine thread-2), thread length b (L≤125 / 125<L≤200 / L>200), c min/max, da max, ds max + Grade A/B min, dw Grade A/B min, e Grade A/B min, k Nominal Size + Grade A/B min/max, k1 min, r min, s max=nominal size + Grade A/B min. The two-row label column is the source's rowspan layout, carried as separate leading cells with the spanned cells empty. All dimensions in mm as printed. Verification: fetched from the live page 2026-11-02, token-for-token equal to the live-DOM extraction.
Screw Thread d(M68)M72(M76)
PPitchFine thread-1444
Fine thread-2---
Length of Thread bL≤125---
125<L≤200148158164
L>200161169177
cmin---
max111
damax757983
dsmax687276
Grade Amin---
Grade Bmin67.2671.2675.26
dwGrade Amin---
Grade Bmin92.997.7102.4
eGrade Amin---
Grade Bmin110.51116.16121.81
kNominal Size434548
Grade Amin---
max---
Grade Bmin42.544.547.5
max43.545.548.5
k1min29.831.233.2
rmin222
smax=nominal size100105110
Grade Amin---
Grade Bmin97.8102.8107.8
  • Row 4 (): Thread-length bounds print full-width comparison characters ('125<L≤200', 'L>200') as on the source page, carried verbatim.
  • Cells print '-' where the source tabulates no value ('Fine thread-2', 'Length of Thread b', 'c', 'Grade A', 'dw', 'e', 'max' rows affected); '-' carried verbatim, not read as zero or blank.
DIN 960 hexagon head bolts, fine-pitch thread — M80 / M90 / M100 (block 9 of 9)Dimensions per the collected page: size blocks of three thread sizes each (M8 - M100). Rows: P (pitch, fine thread-1 / fine thread-2), thread length b (L≤125 / 125<L≤200 / L>200), c min/max, da max, ds max + Grade A/B min, dw Grade A/B min, e Grade A/B min, k Nominal Size + Grade A/B min/max, k1 min, r min, s max=nominal size + Grade A/B min. The two-row label column is the source's rowspan layout, carried as separate leading cells with the spanned cells empty. All dimensions in mm as printed. Verification: fetched from the live page 2026-11-02, token-for-token equal to the live-DOM extraction.
Screw Thread dM80M90M100
PPitchFine thread-1444
Fine thread-2---
Length of Thread bL≤125---
125<L≤200172192-
L>200185205225
cmin---
max222
damax8797108
dsmax8090100
Grade Amin---
Grade Bmin79.2689.1399.13
dwGrade Amin---
Grade Bmin107.2121.1135.4
eGrade Amin---
Grade Bmin127.46144.08161.03
kNominal Size505763
Grade Amin---
max---
Grade Bmin49.556.462.4
max50.557.663.6
k1min34.639.543.7
rmin22.52.5
smax=nominal size115130145
Grade Amin---
Grade Bmin112.8127.5142.5
  • Row 4 (): Thread-length bounds print full-width comparison characters ('125<L≤200', 'L>200') as on the source page, carried verbatim.
  • Cells print '-' where the source tabulates no value ('Fine thread-2', 'Length of Thread b', '125<L≤200', 'c', 'Grade A', 'dw', 'e', 'max' rows affected); '-' carried verbatim, not read as zero or blank.

Materials

  • Fine-pitch hex bolts ship in the same material spectrum as the coarse series — carbon steel by property class and stainless A2/A4. The dimensions tabulated here are material-independent; state pitch explicitly on the RFQ (a fine pitch left unspecified is the single most common fulfillment error on this family)

Ordering & documentation

Documents

Shipments of DIN 960 Hex Bolts (Fine Pitch, Partially Threaded) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 960 Hex Bolts (Fine Pitch, Partially Threaded) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 960 Hex Bolts (Fine Pitch, Partially Threaded)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 960 Hex Bolts (Fine Pitch, Partially Threaded): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 960 hex bolts (fine pitch, partially threaded) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 960 hex bolts (fine pitch, partially threaded); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 960 hex bolts (fine pitch, partially threaded) run 3–7 days. High-strength and custom parts for din 960 hex bolts (fine pitch, partially threaded) run 15–25 days. Quantities or variants of din 960 hex bolts (fine pitch, partially threaded) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 960 Hex Bolts (Fine Pitch, Partially Threaded) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 960 hex bolts (fine pitch, partially threaded) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Which fine pitch do I order when a DIN 960 size lists two selections?

The one on the drawing — that is exactly why the grids carry both a fine thread-1 and a fine thread-2 row. Two selections exist only where the second row prints a value: M10 (1 / 1.25), M12 (1.5 / 1.25), M18 (2 / 1.5) and the M20 - M24 block (1.5 / 2, 2 / 1.5, 2 / 1.5 — note the ordering swaps per size, as printed). Every other size carries a single fine pitch — 1 at M8, rising through 1.5, 2 and 3 to 4 across the largest blocks — with the fine thread-2 row printing "-". A nut bought for the wrong selection threads on by one or two turns and then binds, and no amount of torque fixes a pitch mismatch — state "DIN 960 M20 × 1.5" on the RFQ, diameter and pitch together, the way the tables print them.

What do the parentheses in the size headers and the "-" cells mean?

Both are the source's own markings, carried verbatim. Parentheses around a size — (M14), (M18), (M22), (M27), (M39), (M45), (M52), (M60), (M68), (M76) — mark the non-preferred sizes of the ladder; they are manufactured and quoted, but a drawing that does not force them should first consider the preferred neighbours. The "-" cells mean the value is not tabulated at that position: Grade A minimums disappear across the largest blocks (M80 - M100 rows for ds, dw, e, k and s print Grade B only), and the L≤125 thread length row is empty from M56 up — even the 125<L≤200 band prints "-" for M100. Read "-" as "ask, don't assume" — quote the size and pitch on the RFQ and we confirm the tabulated geometry before quoting.

What is the MOQ and lead time for DIN 960 Hex Bolts (Fine Pitch, Partially Threaded)?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 960 Hex Bolts (Fine Pitch, Partially Threaded) state?

State the full designation (DIN 960), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 960 Hex Bolts (Fine Pitch, Partially Threaded) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 960 Hex Bolts (Fine Pitch, Partially Threaded)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.