ASME B18.2.3.3M Heavy Hex Screws (Metric)

Metric heavy hex screws per ASME B18.2.3.3M — head and body dimension table for M12 to M36 with per-size thread pitches: body diameter Ds, width across flats/corners, head height K, wrenching height K1, washer face geometry.

Last updated: 2026-11

Request a Quote

ASME B18.2.3.3M Heavy Hex Screws (Metric) in an industrial setting
Illustrative image redrawn from real ASME B18.2.3.3M Heavy Hex Screws (Metric) product references — not a photograph of stocked items.

Specifications

B18.2.3.3M is the metric heavy hex screw in the ASME B18.2.3 family: the same enlarged-head logic as the imperial heavy hex bolt, built for high-strength structural and heavy-equipment joints on a metric thread. The collected table runs M12 to M36 in the coarse metric pitches (M12 x 1.75 through M36 x 4), and the numbers show what "heavy" buys: a width across flats of 21 mm at M12 against 18 mm for a standard hex head — a 27 mm wrench size at M16, 34 at M20, 60 at M36 — with across-corners maxima (24.25 / 31.18 / 39.26 / 69.28 mm) sized so the wrenching faces stay usable on a head that carries the higher preloads these screws are selected for. Head height K max/min (7.76/7.24 at M12, 10.32/9.68 at M16) runs proportionally deeper than a standard hex head, and the washer-face columns (C 0.6/0.3 at M12, Dw min 19.6) define the seating that keeps the bearing pressure on the joint, not the fillet. Body diameter minima (11.73 at M12, 35.61 at M36) matter for thread-rolling blanks. Strength classes, proof loads and finish are not tabulated on the collected page — per RFQ.

Standard ASME B18.2.3.3M — metric heavy hex screws, coarse pitch, sizes M12 - M36 (M12 x 1.75, M14 x 2, M16 x 2, M20 x 2.5, M24 x 3, M30 x 3.5, M36 x 4)
Width across flats S Max = nominal wrench size, min tolerance below (M12: 21 / 20.67; M16: 27 / 26.67; M20: 34 / 33; M36: 60 / 58.80) — the heavy-hex ladder, one size above standard hex at M12/M16
Width across corners E Max/min pairs (M12: 24.25 / 23.35; M20: 39.26 / 37.29; M36: 69.28 / 66.44)
Head height K Max/min (M12: 7.76 / 7.24; M16: 10.32 / 9.68; M36: per the collected table) with wrenching height K1 min (M12: 5.2, M16: 7)
Body diameter Ds Max = nominal, min for rolling blanks (M12: 11.73; M20: 19.67; M36: 35.61)
Washer face Thickness C max/min (0.6/0.3 at M12, 0.8/0.4 from M16) and washer face diameter Dw min (M12: 19.6, M16: 25.3)
Not tabulated Strength classes (property class / ASTM grade), proof loads, thread length B values, finish — per RFQ
ASME B18.2.3.3M metric heavy hex screws — Nominal Dia., D , and Thread Pitch / Body Diameter.,D s / Width Across Flats,S / Width ... (table 1 of 1)All dimensions in mm as printed. Each size row is labeled with its thread pitch (e.g. M12 x 1.75). Columns: body diameter Ds max/min, width across flats S max/min, width across corners E max/min, head height K max/min, wrenching height K1 min, washer face thickness C max/min, washer face diameter Dw min. All dimensions in millimeters; the trailing footnote row repeats the source note in every column, carried verbatim.
Nominal Dia., D , and Thread PitchBody Diameter.,D sBody Diameter.,D sWidth Across Flats,SWidth Across Flats,SWidth Across Corners, EWidth Across Corners, EHead Height, KHead Height, KWrenching Height, K 1Washer Face Thickness,CWasher Face Thickness,CWasher FaceDia.,D w
Nominal Dia., D , and Thread PitchMaxMinMaxMinMaxMinMaxMinMinMaxMinMin
ANSI B18.2.3.3M - M12 × 1.751211.732120.6724.2523.357.767.245.20.60.319.6
ANSI B18.2.3.3M - M14 × 21413.732423.6727.7126.759.098.516.20.60.322.5
ANSI B18.2.3.3M - M16 × 21615.732726.6731.1830.1410.329.6870.80.425.3
ANSI B18.2.3.3M - M20 × 2.52019.67343339.2637.2912.8812.128.80.80.431.4
ANSI B18.2.3.3M - M24 × 32423.67414047.3445.215.4414.5610.50.80.438
ANSI B18.2.3.3M - M30 × 3.53029.67504957.7455.3719.4817.9213.10.80.446.6
ANSI B18.2.3.3M - M36 × 43635.616058.869.2866.4423.3821.7215.80.80.455.9
All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.All dimensions are in millimeters. Basic thread lengths, B, are the same as given in . Transition thread length, X, includes the length of incomplete threads and tolerances on grip gaging length and body length. It is intended for calculation purposes. For additional manufacturing and acceptance specifications, reference should be made to the Standard.
  • The trailing row repeats the source's usage note in every column (including its dangling 'as given in .' reference), carried verbatim; the header prints 'Body Diameter.,D s' with the source's punctuation.

Materials

  • Metric heavy hex screws in this size class ship in carbon steel by property class (8.8 and up is the common structural range) and stainless A2/A4; the dimensions tabulated here are material-independent. State the required property class and any certificate level (EN 10204 3.1) explicitly on the RFQ — the collected page carries geometry only

Ordering & documentation

Documents

Shipments of ASME B18.2.3.3M Heavy Hex Screws (Metric) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.2.3.3M Heavy Hex Screws (Metric) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.2.3.3M Heavy Hex Screws (Metric)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASME B18.2.3.3M Heavy Hex Screws (Metric): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for asme b18.2.3.3m heavy hex screws (metric) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for asme b18.2.3.3m heavy hex screws (metric); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.2.3.3m heavy hex screws (metric) run 3–7 days. High-strength and custom parts for asme b18.2.3.3m heavy hex screws (metric) run 15–25 days. Quantities or variants of asme b18.2.3.3m heavy hex screws (metric) outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.2.3.3M Heavy Hex Screws (Metric) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.2.3.3m heavy hex screws (metric) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When does a B18.2.3.3M heavy hex screw replace a standard ISO 4017 hex bolt?

When the joint, not the catalogue, sets the wrench size. The collected table shows the mechanical difference directly: at M12 the heavy hex head presents 21 mm across flats against 18 mm for a standard hex — more bearing surface under the head and a larger, deeper hex for the high torques that high property classes need. In practice the substitution runs the other way: a drawing written around ASME heavy-hex practice (structural steelwork, heavy equipment, flanged assemblies) calls B18.2.3.3M by name, and a standard hex bolt should not be quietly fitted because it happens to thread in — the seating geometry (Dw, C) and head height differ along with the wrench size. Order by the drawing designation, pitch included.

Why does the table end at M36 and what does the trailing footnote row mean?

M36 is where the collected page stops tabulating: the B18.2.3.3M ladder in common supply runs M12 - M36, and larger metric heavy-hex sizes become engineered specials rather than catalogue items — quote them per RFQ with the joint data. The final row of the collected grid repeats the same usage note in every column (all dimensions in millimeters; basic thread lengths B referenced to the Standard; transition thread length X intended for calculation purposes) — it is the source page's own footnote layout, carried as printed. The note also flags that the thread-length values are not reproduced on this particular page — bring the required length band to the RFQ and we confirm against the Standard.

What is the MOQ and lead time for ASME B18.2.3.3M Heavy Hex Screws (Metric)?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ASME B18.2.3.3M Heavy Hex Screws (Metric) state?

State the full designation (ASME B18.2.3.3M), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.2.3.3M Heavy Hex Screws (Metric) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your ASME B18.2.3.3M Heavy Hex Screws (Metric)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.