DIN 1478 Turnbuckle Bodies (Closed Body)

DIN 1478 turnbuckle bodies, threads M6–M80x6 — the closed steel-tube take-up body with a right- and left-hand thread at each end, sized by the collected ladder: body length L, tube outside diameter d2, end width m and the cross-hole d1 for the end-fitting pin.

Last updated: 2026-11

Request a Quote

DIN 1478 Turnbuckle Bodies (Closed Body) in an industrial setting
Illustrative image redrawn from real DIN 1478 Turnbuckle Bodies (Closed Body) product references — not a photograph of stocked items.

Specifications

A DIN 1478 turnbuckle is the closed-body take-up: a steel tube with a right-hand internal thread at one end and a left-hand at the other, so turning the body winds both threaded ends in or out together and adjusts the tension of a rod, cable or tie assembly without rotating the ends. The collected ladder runs 17 thread sizes, M6 to M80x6 (the two largest are fine-pitch, as printed), and carries per size the body length L (110 mm at M6 up to 440 mm at M80x6), the tube outside diameter d2 (17,2 mm — the 17,2/21,3/25 mm ladder of standard steel tube — growing to 120 mm), the end width m across the flats that a wrench holds, and the cross-hole d1 (min./max.) through the body ends for the pin that fixes the end fitting. Reading order at assembly: thread a right-hand end stud into the right-hand bore and a left-hand stud into the left-hand one (mixing handedness strips the first thread), take the cross-hole d1 against the end-fitting pin — it is a range (min./max.) per the ladder, and note one flagged quirk at M52 where the printed min. exceeds the max — and turn the body to take up slack. Working load ratings are not tabulated by the collected specification — per RFQ, and they matter: a turnbuckle body is a tension member, so state the working load at quotation. The matching DIN 1479 hex turnbuckle nuts lock the stud ends; they are on this catalog's nuts family.

Standard DIN 1478 — turnbuckles, closed body (steel tube, RH thread one end / LH the other)
Thread range M6 – M80x6, seventeen sizes; M72x6 and M80x6 are fine-pitch as printed
Body length L: 110 mm (M6, M8) → 255 mm (M24–M30) → 440 mm (M80x6)
Body tube d2 outside diameter on the standard steel-tube ladder: 17,2 / 21,3 / 25 / 30 / 33,7 / 42,4 / 51 / 63,5 / 70 / 82,5 / 90 / 100 / 110 / 120 mm
Cross-hole d1 min./max. per size: 5,7/6,3 at M6 → 29,5/30,5 at M72x6 and M80x6 — the pin hole for the end fitting
Wrenching End width m: 7,5 mm at M6 → 96 mm at M80x6 (M27 value flagged — see table note)
Load rating / material Not tabulated by the collected specification — per RFQ (state the working tension load; a turnbuckle body is a tension member)
DIN 1478 turnbuckle bodies (closed body, steel tube) — thread, body tube and end-fitting geometry, M6–M80x6All dimensions in millimetres, comma decimal separators preserved from the source. L = body length (take-up between thread ends); m = thread end width; d2 = body tube outside diameter; d1 (min./max.) = cross-hole diameter range for the end fitting pin; h = tube wall-related dimension as printed. Working load and material grade are not tabulated by the source — per RFQ. Threads M72x6 / M80x6 are fine-pitch series as printed.
ThreadBody Length (L)End Width (m)Tube OD (d2)Cross-Hole Dia. (d1 min.)Cross-Hole Dia. (d1 max.)h
M61107,517,25,76,32,9
M81101017,27,58,53,6
M101251221,37,58,54
M1212515259,510,54
M1617020309,510,54,5
M202002433,711,512,55
M242552942,411,512,55,6
M272554042,411,512,55,6
M30255365115,516,56,3
M362954363,515,516,58
M42330517019,520,58,8
M483555882,519,520,510
M523555882,524,520,510
M56355689024,525,515
M644257710024,525,516
M72x64258711029,530,517
M80x64409612029,530,518
  • Row 13 (M52): The source prints d1 max. = 20,5 at M52 while d1 min. = 24,5 (min above max); reproduced verbatim from the printed row. Verify against the standard before quoting the cross-hole at M52.
  • Row 8 (M27): The source prints m = 40 at M27 against the surrounding ladder 29 / 36 / 43 (M24/M30/M36); reproduced verbatim as printed. Verify against the standard before quoting m at M27.

Materials

  • Material and finish specified per RFQ — turnbuckle bodies are tension members in rigging and tie-rod service; state the working load, the end-fitting type and the environment with the order

Ordering & documentation

Documents

Shipments of DIN 1478 Turnbuckle Bodies (Closed Body) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 1478 Turnbuckle Bodies (Closed Body) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 1478 Turnbuckle Bodies (Closed Body)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 1478 Turnbuckle Bodies (Closed Body): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 1478 turnbuckle bodies (closed body) is 1,000–10,000 pieces depending on size (applies to the standard sizes and finishes for din 1478 turnbuckle bodies (closed body); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 1478 turnbuckle bodies (closed body) run 3–7 days. High-strength and custom parts for din 1478 turnbuckle bodies (closed body) run 15–25 days. Quantities or variants of din 1478 turnbuckle bodies (closed body) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 1478 Turnbuckle Bodies (Closed Body) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 1478 turnbuckle bodies (closed body) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How do I choose a DIN 1478 body size and assemble it without stripping the ends?

Start from the tension load, not the thread — the collected table carries geometry only, and the body is a tension member, so the working load is an RFQ line. Once the thread size is fixed by the mating studs, the collected ladder gives you the body: L (110 mm at M6 up to 440 mm at M80x6) is the take-up envelope, d2 (the 17,2 → 120 mm steel-tube ladder) is the body you are fitting clearance around, and the cross-hole d1 (a min./max. range, 5,7/6,3 mm at M6 up to 29,5/30,5 mm at the fine-pitch large ends) takes the end-fitting pin. Assembly discipline: right-hand stud into the right-hand end only — the body has opposite hands at its two ends, and forcing a stud into the wrong bore strips the lead thread before it ever takes tension; hold the body by its end width m with a wrench and turn to adjust. Three cells in the collected capture are flagged verbatim (m = 40 at M27 against a 29/36/43 surrounding ladder, and a d1 min. above max at M52) — check those against the standard before quoting. Lock the adjusted stud ends with DIN 1479 hex turnbuckle nuts (this catalog's nuts family), and state material, finish and working load at RFQ — none of that is in the collected table.

What is the MOQ and lead time for DIN 1478 Turnbuckle Bodies (Closed Body)?

Orders under this designation have a minimum order quantity of 1,000–10,000 pieces depending on size. Stock items ship in 3–7 days; high-strength and custom parts in 15–25 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 1478 Turnbuckle Bodies (Closed Body) state?

State the full designation (DIN 1478), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 1478 Turnbuckle Bodies (Closed Body) inquiry

  • ✓ Name the bolt standard and product form, then give nominal diameter, pitch, length and threaded length.
  • ✓ State the applicable property class or material grade, head style, and coating or finish.
  • ✓ Identify the mating nut/washer and the joint duty; include any specified preload, tightening method or friction condition.
  • ✓ Give quantity per size, destination and required material or inspection certificates.
  • ✓ Factory-direct pricing for your DIN 1478 Turnbuckle Bodies (Closed Body)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.