2H06 Two-Hole (Pig Nose) Spanner Security Nuts
Reusable spanner-drive security nuts with a two-hole (pig nose) head pattern, M5–M10 as tabulated: head diameters 12–22 mm, heights 4.2–8.0 mm, hole diameters 2.0–3.5 mm with 2.3–3.8 mm minimum depth. A1 stainless steel as standard; a special two-hole driver is required.
Last updated: 2026-11
Specifications
The two-hole pig nose nut is the plain spanner-drive member of the security family: a rounded nut whose flat face carries just two round holes, engaged only by a matching two-hole driver — an ordinary spanner, socket or pliers has nothing to grip. The collected tabulation runs M5 to M10, with head diameters stepping from 12 mm to 22 mm, nut heights from 4.2 mm to 8.0 mm, and the hole pair growing from 2.0 mm diameter with a 2.3 mm minimum depth at M5 to 3.5 mm diameter and 3.8 mm depth at M10. A1 stainless steel is the standard material, with steel available to order. The fixing is reusable — install and remove it as often as the driver allows — which suits panels and enclosures that need legitimate servicing. Two honest cautions come with the drive: the two-hole pattern is more prone to cam-out than pin-hex or Kinmar-style drives, and the drivers themselves can bend or break after prolonged use, so the source advises keeping a spare tool. Security fencing, cladding panels, plant enclosures and public furniture are the typical ground.
| Designation | 2H06 — two-hole (pig nose) spanner security nut; two round holes in a flat face, driven only by a matching two-hole tool |
|---|---|
| Thread range (tabulated) | M5, M6, M8, M10 |
| Head diameter dk per thread (mm) | M5 12.0 · M6 14.0 · M8 18.0 · M10 22.0 |
| Nut height m per thread (mm) | M5 4.2 · M6 5.0 · M8 6.5 · M10 8.0 |
| Drive hole diameter dh per thread (mm) | M5 2.0 · M6 2.5 · M8 3.0 · M10 3.5 |
| Drive hole depth t min. per thread (mm) | M5 2.3 · M6 2.8 · M8 3.3 · M10 3.8 |
| Security principle | Two-hole spanner drive — no hex flats or slot to grip; removable/reusable with the matching driver |
| Drive cautions (source-stated) | More prone to cam-out than Kinmar or wave drives; drivers can bend or break in prolonged use — a spare tool is advised |
| Materials (collected) | A1 stainless steel as standard; steel available to order |
Materials
- A1 stainless steel
- Steel (to order)
The security of this pig-nose pattern is the drive geometry, not the metal: two-hole spanner fixings are turned by a matching two-pin tool for installation and authorized removal, and the honest ceiling is that spanner fixings discourage casual tampering but are not removal-proof — so the A1-versus-steel decision below is about corrosion and availability, never about a security class.
A1 stainless sits in the 18-8 austenitic family — the alloy group spanning 303, 303s, 304 and XM7 at 18 percent chromium and 8-10 percent nickel — which is the general-purpose corrosion answer for indoor and dry-outdoor fixtures, and free-machining 303-family stock keeps the small two-hole drive pockets crisp in production.
The "Steel (to order)" row is the cost-led variant carried against order rather than stocked: identical geometry with a plated-steel corrosion budget, but a lead-time expectation that differs from the stocked A1 line — state the deadline on the RFQ and it is confirmed at quotation.
Ordering & documentation
Documents
Shipments of 2H06 Two-Hole (Pig Nose) Spanner Security Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for 2H06 Two-Hole (Pig Nose) Spanner Security Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (2H06 Two-Hole (Pig Nose) Spanner Security Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for 2H06 Two-Hole (Pig Nose) Spanner Security Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for 2h06 two-hole (pig nose) spanner security nuts is 10,000 pieces (applies to the standard sizes and finishes for 2h06 two-hole (pig nose) spanner security nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for 2h06 two-hole (pig nose) spanner security nuts run 3–7 days. Quantities or variants of 2h06 two-hole (pig nose) spanner security nuts outside the standard range are confirmed at quotation.
Storage & shipping
2H06 Two-Hole (Pig Nose) Spanner Security Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store 2h06 two-hole (pig nose) spanner security nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When is a two-hole pig nose nut the right security choice?
When the joint must be reopenable but not by casual hands. The two-hole face gives a standard spanner nothing to turn, yet the dedicated driver reopens the joint for servicing — so it fits access panels, cladding and enclosures with legitimate maintenance schedules. If the joint must never reopen, a permanent pattern like a shear nut is the better pick; if drivers will see heavy daily use, consider a more cam-out-resistant drive such as pin-hex.
Why keep a spare driver for this nut?
The collected page is explicit that two-hole drivers are prone to bending or breaking after prolonged use, and recommends purchasing a back-up. Losing the driver does not lock the joint permanently — two-hole drivers are a known tool category — but it does stall maintenance, so a spare in the tooling drawer is cheap insurance for any installation beyond a handful of fixings.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the designation (for example the spanner-drive SKU and head style), nominal thread size and pitch, material and finish, whether the matching drive tool or bit is needed, the mating screw or stud specification, required certificates, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your 2H06 Two-Hole (Pig Nose) Spanner Security Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your 2H06 Two-Hole (Pig Nose) Spanner Security Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support