DIN 6331 Collared Clamping Nuts (Height 1.5 × d)
DIN 6331 collared hexagon clamping nuts, M6 to M48 — the 1.5 × d tall clamping nut with a raised locating boss for jig and fixture pockets, with the collected per-size table: boss height a, boss diameter d1, bore da, e, m, s with printed tolerance cells and reference weight per 1000 pieces.
Last updated: 2026-11
Specifications
DIN 6331 is the locating variant of the tall clamping nut: it keeps the 1.5 × d height that gives a fixture clamp more engaged thread, and adds a raised cylindrical boss — diameter d1, height a — that seats in a counterbored pocket and keeps the nut from spinning or wandering while it is torqued. Where the plain DIN 6330 clamping nut bears flat on a jig plate, this one self-locates: drop it into the pocket, run the fixture stud (DIN 787 and its kin are the usual mates), and the boss holds alignment without the machinist eyeballing concentricity. The collected table runs M6 through M48 and prints, per size, the boss height a, the boss diameter d1 with an h13-class tolerance, the bore da as a min./max. pair, across-corners e, height m, width across flats s with tolerance cells where the source prints them, and a reference weight per 1000 pieces. Two things to check against the printed table rather than against arithmetic: the source's m value at M27 is 40, not the 40,5 that 1.5 × d would give, and its s-tolerance cell appears only on the M6 (h13) and M24 (h14) rows — both are carried here as printed, flagged in the table notes. Property classes 8/10 and stainless A2/A4 come from the source's materials panel; finish is not tabulated — state the duty and environment at quotation.
| Standard / scope | DIN 6331 collared hexagon clamping nuts, height 1.5 × d, M6 to M48 (the source's cross-reference panel also prints PN 61272) |
|---|---|
| Height | m = 1.5 × d in eleven of twelve table rows (9 at M6 up to 72 at M48); M27 prints 40 against a computed 40,5 — carried as printed |
| Locating boss | Boss height a 3 → 14; boss diameter d1 14 → 92 — the pocket-location feature that separates DIN 6331 from plain DIN 6330 |
| Bore | da printed as a min./max. pair per size (6 / 6,75 at M6 up to 48 / 51,8 at M48) |
| Across corners / flats | e 11,05 → 83,91 and s 10 → 75 (decimal commas as printed); s tolerance printed only on M6 (h13) and M24 (h14) rows |
| Reference mass | Source "weight kg/1000pcs": 6 → 1970 kg per 1000 pieces |
| Materials / property classes | Steel grades 8, 10; stainless A2, A4; thread 6H (source materials panel). Finish not tabulated — per RFQ |
| d | a (boss height) | d1 (boss diameter) | da (min.) | da (max.) | e | m | s | s tolerance (as printed) | weight kg/1000pcs |
|---|---|---|---|---|---|---|---|---|---|
| M6 | 3 | 14 | 6 | 6,75 | 11,05 | 9 | 10 | h13 | 6 |
| M8 | 3,5 | 18 | 8 | 8,75 | 14,38 | 12 | 13 | 12 | |
| M10 | 4 | 22 | 10 | 10,8 | 17,77 | 15 | 16 | 22 | |
| M12 | 4 | 25 | 12 | 13 | 20,03 | 18 | 18 | 30 | |
| M16 | 5 | 31 | 16 | 17,3 | 26,75 | 24 | 24 | 68 | |
| M20 | 6 | 37 | 20 | 21,6 | 33,53 | 30 | 30 | 124 | |
| M24 | 6 | 45 | 24 | 25,9 | 39,98 | 36 | 36 | h14 | 219 |
| M27 | 7 | 50 | 27 | 29,1 | 45,63 | 40 | 41 | 320 | |
| M30 | 8 | 58 | 30 | 32,4 | 51,28 | 45 | 46 | 464 | |
| M36 | 10 | 68 | 36 | 38,9 | 61,31 | 54 | 55 | 790 | |
| M42 | 12 | 80 | 42 | 45,4 | 72,61 | 63 | 65 | 1290 | |
| M48 | 14 | 92 | 48 | 51,8 | 83,91 | 72 | 75 | 1970 |
- Header rowspan mismatch in the source grid: the two header rows print 8 cells each against 10 cells in the fully-populated data rows. The positional attribution of the tolerance sub-row (js14 over a, h13 over d1, min./max. over da, min. over e, js15 over m, "tolerace" [sic, source typo] over s) is kept as printed and not adjudicated.
- Asymmetric data rows: M6 and M24 print 10 cells (s tolerance present: h13 and h14 respectively); the other ten rows print 9 cells with the s-tolerance cell omitted by the source DOM. The empty cells here record that omission verbatim — they are not read as "no tolerance applies" and not back-filled from the pattern.
- Height ratio check: m equals 1.5 × d exactly in eleven of twelve rows; M27 prints m = 40 against a computed 40,5. The printed value is kept without correction — flag for quoting engineers checking a fixture pocket at M27.
- The source legend is partially non-nut wording ("da - Turning diameter shrinkage", "a - Shoulder height") while its own product drawing shows a nut with a raised cylindrical boss; the column names here follow the drawing (boss height a, boss diameter d1, bore da) with the source's letters kept.
- The source's equivalent-norms panel prints PN 61272 — the same cross-reference printed on the same site's DIN 6330 page. Carried as printed, not adjudicated.
Materials
- Steel (property classes 8, 10) or stainless steel (A2, A4) per the collected source's materials panel; finish confirmed at quotation (tenant supply range)
Ordering & documentation
Documents
Shipments of DIN 6331 Collared Clamping Nuts (Height 1.5 × d) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6331 Collared Clamping Nuts (Height 1.5 × d) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6331 Collared Clamping Nuts (Height 1.5 × d)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 6331 Collared Clamping Nuts (Height 1.5 × d): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 6331 collared clamping nuts (height 1.5 × d) is 10,000 pieces (applies to the standard sizes and finishes for din 6331 collared clamping nuts (height 1.5 × d); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6331 collared clamping nuts (height 1.5 × d) run 3–7 days. Quantities or variants of din 6331 collared clamping nuts (height 1.5 × d) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6331 Collared Clamping Nuts (Height 1.5 × d) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6331 collared clamping nuts (height 1.5 × d) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 6331 vs DIN 6330 — when does the collared nut earn its price?
When the nut has to locate, not just clamp. Both are 1.5 × d tall hexagon clamping nuts and both are machined, but DIN 6331 adds a raised boss (d1, with height a) that seats in a counterbored fixture pocket: the nut cannot spin under the wrench or drift off-centre while the stud is torqued, and the clamp stays concentric with the hole it actuates. If your jig plate already has flat seats and the nut is held by other means, plain DIN 6330 is the cheaper part; if you are drilling fresh pockets anyway or the clamp must repeat position across setups, the collared DIN 6331 pays for itself. The collected tables for the two standards differ completely — DIN 6331 carries the boss dimensions a and d1 that DIN 6330 does not — so a drawing that calls one number will not accept the other.
What does an RFQ for DIN 6331 nuts need to state?
Thread size, the DIN 6331 number, and the pocket dimensions in the jig plate (bore and depth), because the boss diameter d1 and boss height a are what the pocket sees — the table on this page gives both per size. Name the mating stud and its standard (fixture studs such as DIN 787 are the common mates) so the 6H thread fit is checked on both parts. Add material — steel class 8 or 10, or stainless A2/A4 per the collected panel — plus finish, quantity and any certificate requirement such as an EN 10204 3.1 mill report. Sizes or pocket fits outside the collected table are quoted to drawing.
Is DIN 6331 a nut or a bolt? The numbers get transposed on drawings.
Per the collected reference, DIN 6331 is a nut: the tall 1.5 × d clamping nut with a raised boss tabulated on this page — its legend reads "height of the nut", its thread spec is the 6H nut thread, and its drawing shows a tapped, countersunk bore under the hexagon. DIN 6330 is its plain-boss sister nut. The transposition risk in practice is between these two nut variants (and against fixture-stud standards like DIN 787 on the bolt side), so state the part variant — plain or collared — alongside the DIN number on the RFQ; the tables differ and a transposed number ships a nut that will not seat in the pocket.
What is the MOQ and lead time for DIN 6331 Collared Clamping Nuts (Height 1.5 × d)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 6331 Collared Clamping Nuts (Height 1.5 × d) state?
State the full designation (DIN 6331 Collared Clamping Nuts (Height 1.5 × d)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6331 Collared Clamping Nuts (Height 1.5 × d) inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 6331 Collared Clamping Nuts (Height 1.5 × d)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support